msi CLUTCH GM51 Lightweight Wireless Mouse User Guide

: October 30, 2023
: MSI

Table of Contents

msi CLUTCH GM51 Lightweight Wireless Mouse
Product Information
Product Usage Instructions
Overview
LED Indicators Adjustment
Bluetooth Paring
5-level DPI Presets
Battery Capacity Indicator
FCC Compliance Statement
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

msi CLUTCH GM51 Lightweight Wireless Mouse

msi-CLUTCH-GM51-Lightweight-Wireless-Mouse-product

Product Information

The CLUTCH GM51 LightWeight Wireless is a wireless gaming mouse manufactured by MSI. It comes equipped with an optical sensor, MSI Diamond LightGrip, Dragon RGB LED Light, FriXionFree Cable, DPI switch, slider switch, PTFE skates, wireless USB dongle, charging port, and anti-slip strip. The mouse is compatible with Microsoft Swift Pair and has a maximum DPI of 26000.

Product Usage Instructions

Bluetooth Pairing

Turn off the power of the mouse.
Press and hold the DPI button.
Set the slider switch to Bluetooth mode and keep holding the DPI button for 5 seconds then release it to activate the pairing mode.
Activate Bluetooth on your device and select MSI GM51 from the list of devices found.

Note: For more information on LED indicators adjustment and other product features, please visit the MSI official website.

Overview

msi-CLUTCH-GM51-Lightweight-Wireless-Mouse-fig
1

Left Button
Right Button
Scroll Wheel
Side Button 1 (Default Setting: Next Page)
Side Button 2 (Default Setting: Previous Page)
MSI Diamond LightGrip
Dragon RGB LED Light
Portable FriXionFree Cable
DPI Switch
Slider Switch: 2.4G Mode/Bluetooth Mode/Off
Optical Sensor
Charging Port
PTFE Skates
Wireless USB Dongle
Charging Pin (For charging the CLUTCH GM51 LIGHTWEIGHT WIRELESS)
Dongle Port (Used when MSI Dongle is inserted)
USB Type-C Connector
Charger Anti-Slip Strip

LED Indicators Adjustment

Use the following buttons in combination repeatedly until the preferred selection is made.

DPI Switch + Right Button = adjust the LED brightness levels
DPI Switch + Scroll Wheel = select a LED Lighting Effect
DPI Switch + Side Button 1 = adjust the Lighting Effect Speed
DPI Switch + Side Button 2 = select a LED Color
※ For more information, please visit MSI official website.

Bluetooth Paring

Turn off the power
Press and hold the DPI button
Set the Slider Switch to Bluetooth mode, keep holding the DPI button for 5 secs then release it to activate the pairing mode.
Activate Bluetooth on your device and select “MSI GM51” from the list of devices found.

Support Microsoft Swift Pair.

5-level DPI Presets

The higher DPI will be recommended to the monitors with higher resolution. Press repeatedly the DPI switch located underneath the mouse until the preferred selection is made.

LED color	DPI
Blue	400
Purple	800
Red	1600（default）
Yellow	3200
Green	6400

※ Maximum DPI: 26000（by software）

Battery Capacity Indicator

Read the color of the Dragon RGB LED indicator to learn the battery capacity of the mouse.

Battery capacity	LED color
90% – 100%	Steady Green
70% – 90%	Breathing Green
50% – 70%	Breathing Yellow
30% – 50%	Breathing Orange
10% – 30%	Breathing Red
0% – 10%	Flashing Red

Battery Percentage (%) can also be found in DragonCenter / MSI Center
Rated Voltage / Current : 5V 600mA；Maximum Operating Temperature : 40 °C
For more information, please visit MSI official website

Declaration of the Presence Condition of the Restricted Substances Marking

Device Name: Wireless Mouse, Model (Type)： 8ZB5

Equipment name Type designation (Type)

Unit

|

Restricted substances and its chemical symbols

Lead

(Pb)

|

Mercury

(Hg)

|

Cadmium (Cd)

| Hexavalent chromium

(Cr+6 )

| Polybrominated biphenyls

(PBB)

| Polybrominated diphenyl ethers

(PBDE)

Note 1：“Exceeding 0.1 wt %＂and“exceeding 0.01 wt %＂indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Note 2：“○＂indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3：The“—＂indicates that the restricted substance corresponds to the exemption.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulations.
Services web address: www.msi.com
Hereby, MSI declares that the radio equipment type 8ZB5 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.msi.com

BSMI Statement

Replacement of battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NBM-003(B)
This Class B digital apparatus complies with Canadian ICES-003.