PYLE PLBAS122LE Active Dual Bass Subwoofer Box System User Guide

June 4, 2024
Pyle

PYLE PLBAS122LE Active Dual Bass Subwoofer Box System

PYLE -Active-Dual-Bass-Subwoofer-Box-System-
PRODUCT

Features

  • Built-in Illuminating LED Lights
  • Class-D Powered Enclosure Amplifer
  • Rear Vented Design
  • High Powered 8-inch Woofers with a Silver Paper Cone
  • Rubber Edge Suspension
  • Smooth Carpet Finish
  • 4 Layer Dual Voice Coil
  • Binding Post Connectors
  • Perfect for Truck and Behind the Seat
  • High-Quality Construction

What’s in the Box

  • Subwoofer Box
  • LED Remote Control
  • Output Wire for Amplifer

WIRING CONNECTION

Power amplifer for schematic diagram.PYLE -Active-Dual-Bass-Subwoofer-Box-
System-FIG-1

  • Positive pole: Connect +12V and Rem. in parallel
  • Negative pole: connect to GND
  1. 6pin-Power Supply Line
  2. 4pin-High input Line
  3. Tuner
  4. 6M Connecting LinePYLE -Active-Dual-Bass-Subwoofer-Box-System-FIG-3

REMOTE CONTROL FEATURES

  1. Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
  2. Dynamic Mode button: Switch from dynamic mode to color mode or switch between dynamic modes.
  3.  Dynamic Mode Speed button: Use these buttons to adjust dynamic mode speed. If the unit is in static mode, pressing these buttons will switch unit to dynamic mode.
  4. Static Color Adjust button: Use this button to swit h between static colors. Pressing these keys while in dynamic mode will switch the unit to static mode.
  5. Brightness Adjust button: Pressing these buttons will adjust brightness while in static mode. If these buttons are pressed while unit is in dynamic mode, it will switch to static mode.
  6.  Demo Mode button: This button will switch the unit into demo mode. While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.

PLBAS82LE
8” Dual Bass Subwoofer Box System
Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs

  • Construction Materials: 15mm Particle Board + Multilayer Board
  • Power Rating: 2×400 Watts Max Power
  • Voice Coil: 1.5”
  • Impedance: 4 Ohms
  • Magnet: 2×30 Oz
  • Sensitivity: 90 dB
  • Frequency Response: 40-1K Hz
  • Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
  • Battery Type: 3V Lithium Battery
  • Battery Life: Up to 2+ Hours
  • Product Dimensions (L x W x H): 25.9” x 9.0” x 10.6” -inches

PLBAS102LE
10” Dual Bass Subwoofer Box System
Rear Vented Design with Built-in Illuminating LED LightsPYLE -Active-Dual-
Bass-Subwoofer-Box-System-FIG-5

Technical Specs:

  • Construction Materials: 15mm Particle Board + Multilayer Board
  • Power Rating: 2×500 Watts Max Power
  • Voice Coil: 2.0”
  • Impedance: 4 Ohms
  • Magnet: 2×40 Oz
  • Sensitivity: 91 dB
  • Frequency Response: 35-600 Hz
  • Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
  • Battery Type: 3V Lithium Battery
  • Battery Life: Up to 2+ Hours
  • Product Dimensions (L x W x H): 30.7” x 11.8” x 13.0” -inches

PLBAS122LE
12” Dual Bass Subwoofer Box System
Rear Vented Design with Built-in Illuminating LED Lights

Technical Specs

  • Construction Materials: 15mm Particle Board + Multilayer Board
  • Power Rating: 2×600 Watts Max Power
  • Voice Coil: 2.0”
  • Impedance: 4 Ohms
  • Magnet: 2×50 Oz
  • Sensitivity: 91 dB
  • Frequency Response: 30-300 Hz
  • Remote Control Battery Operated, Requires (1) x ‘CR2025’ Batteries
  • Battery Type: 3V Lithium Battery
  • Battery Life: Up to 2+ Hours
  • Product Dimensions (L x W x H): 33.8” x 12.6” x 14.9” -inches

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals