PULSAR 79142 BT Wireless Remote Control User Manual
- June 12, 2024
- Pulsar
Table of Contents
79142 BT Wireless Remote Control
User Manual
PULSAR BT Wireless
Remote Control
Description
The Wireless Remote Control Pulsar BT is designed to control remotely device’s
selected functions and to navigate its menu.
The Remote Control is compatible with the following models: Krypton, Proton,
Forward, Forward S.
Specifications
| SKU | 79142 |
|---|---|
| Frequency | 2.4 GHz |
| Standard | IEEE 802.15.1 |
| Line-of-sight reception range, m | At least 5 |
| Voltage / Battery | 3V / CR2032 |
| Dimensions, mm / inch | 94x30x28 / 3.7×1.2×1.1 |
| Weight, g / oz | 32 / 1.1 |
Descriptions of controls
| Controller (1)| Button (2)| Button (3)| Button (4)
---|---|---|---|---
Short press| Enter quick menu and submenu of
main menu / Confirm selection / Switch to next option of the
submenu| Calibrate the microbolometer / Turn display on| Turn on IR
illuminator/ Switch IR power
level / Toggle between observation modes | Start video recording / Take a
photograph
Long press| Controller (1)| Turn display off / Turn device off| Turn off IR
illuminator /Switch between colour pallets| Switch to photo/video mode
Clockwise rotation| Quick menu| Increase parameter| 
Main menu| Navigate upwards
Counterclock- wise rotation| Quick menu| Decrease parameter
Main menu| Navigate downwards
- Button functions may vary depending on the Pulsar model.
For detailed description of the Pulsar BT please refer to the user manuals of the respective devices
Remote control activation
To start operate the remote control, remember to activate it as follows:
- Go to the Bluetooth submenu of the Pulsar device.
- Press and hold any button on the Remote Control. The Remote Control is visible in the Bluetooth network and can be connected during this time.
- Select the Remote Control from the Bluetooth submenu of the Pulsar device.
- Once paired, the Remote Control can operate the Pulsar device.
- Going forward, the Remote Control will automatically connect to the paired device when within visible range.
Note: Only one Remote Control can be connected to the device at a time
Troubleshooting
| Problem | Check | Corrective action |
|---|
The device does not work when pressing the Remote Control
buttons or rotating the controller.| The Remote control is not activated|
Activate the remote control according to instructions
Low battery| Install a new CR2032 battery as follows: unscrew the screws on
the rear cover of the Remote Control, remove the cover, install a new battery,
and screw the cover with screws.
The Remote Control is out of range of the device.| Return to the device
coverage area.
The Remote Control does not work if the device is turned off.| Turn on the
device
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>