MeTra 95-7378B Radio Installation Kit For Kia Sportage LX 2017-2019 Instruction Manual
- June 12, 2024
- Metra
Table of Contents
MeTra 95-7378B Radio Installation Kit For Kia Sportage LX 2017-2019 Instruction Manual
KIT FEATURES
- ISO DDIN radio provision
- Painted scratch-resistant matte black
KIT COMPONENTS
- A) Radio trim panel
- B) Radio brackets
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7304
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
DASH DISASSEMBLY
- Unclip and slide the top of the center console back slightly. (Figure A)
- Unclip and remove the panel on the end of the passenger side of the dash, then remove (1) Phillips screw exposed. (Figure B)
- Unclip and remove the dash panel above the glove box. (Figure C)
- Remove (2) Phillips screws securing the radio display and a/c vent panel, then unclip and remove the panel. (Figure D)
- Remove (4) Phillips screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure E)
Continue to Kit Preparation
KIT PREPARATION
Radio Trim Panel Installation
From the factory radio trim panel:
-
Remove (4) Phillips screws securing the inner trim panel, then remove the panel. (Figure A)
To the factory radio trim panel: -
Secure the 95-7379B radio trim panel to the panel using with the factory screws. (Figure B)
Continue to Kit Assembly
KIT ASSEMBLY
- Secure the radio brackets to the radio using the screws supplied with the radio. (Figure A)
- Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metre recommends using the proper mating adapter from Metre and/ or AXXESS. Test the radio for proper operation.
- Secure the radio assembly to the dash using the factory screws.
- Reassemble the dash in reverse order of disassembly to complete the installation.
Having difficulties? We’re here to help. Contact our Tech Support line at:
386-257-1187
Or via email at: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM
® KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most
recognized and respected mobile electronics school in our industry. Log onto
www.installerinstitute.edu or call
386-672-5771 for more information and
take steps toward a better tomorrow.
Metra recommends MECP certified technicians
Metra. The World’s Best Kits.®
MetraOnline.com
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION