star micronics BU01 Buzzer Unit Installation Guide

June 12, 2024
Star Micronics

Installation Guide Buzzer Unit BUO1

Check Accessories

All Accessories / Type of Printer| Bracket| Buzzer| M2.6 screws x2| >r i3 screws x2| Blind Plate| Ferrite Core
---|---|---|---|---|---|---
mC-Print 3| No Used| Used| Used| No Used| No Used| No Used
SP700| No Used| Used| No Used| Used| No Used| No Used
TSP100 / II / III| Used| Used| Used| Only 1 Required| No Used| No Useekbept forTSP I 00GT
Use with TSP100GT
TS P6501I| Used| Used| Used| Only 1 Required| Ko Used| NO tbld
TS P70011| No Used| Used| No Used| 140 oilla| Used| *Orli

Install Buzzer into Star mC-Print 3 Model

  1.  Remove Ground Fitting from the Buzzer by sliding out, See (Pic.1)
  2. Remove Upper Case and 2 screws then remove Buzzer from the Lower Case, See (Pic.2)
  3. Remove Rear Cover behind the printer mC-Print 3, See (Pic.3)
  4. Install Buzzer at behind the printer mC-Print  and install screw(M2.6), See (Pic.4)
  5. Plug the RJ11 Cable to DK-Port and Install Rear Cover behind the printer, See [Pic.5)star micronics BU01 Buzzer Unit - Buzzer

Install Buzzer into Star SP700 Model

  1. Install Buzzer and screw (M3) under the printer unit then plug the RJ11 Cable to DK-Port, See (Pic.1)

Installation Guide Buzzer Unit BUO1

Install Buzzer into Star TSP100/ Il / 1l / TSP650II

  1.  Remove Ground Fitting from the Buzzer by siiding out, See (Pic.1)
  2.  Remove Upper Case and 2 screws for pull the Buzzer out from case, See (Pic.2) 3. Install
  3. screws info Bracket, See (Pic.3)
  4.  Manage cable info Bracket, See (Pic.4)
  5. Install Bracket and screw(M3) under the printer then plug the RJ11 Cable to DK-Port, See (Pic.5)

star micronics BU01 Buzzer Unit - Buzzer 2

• Install Buzzer into Star TSP100/ II / III / TSP650Il

  1.  Remove Ground Fitting from the Buzzer by sliding out, See (Pic.1)
  2. Remove Upper Case and 2 screws for pull the Buzzer out from case, See (Pic.2)
  3. Install 2 screws into Bracket, See (Pic.3)
  4. Manage cable into Bracket, See (Pic.4)star micronics BU01 Buzzer Unit - Buzzer 3
  5. Install Cable Cover o behind the printer, See (Pic.5)
  6. Install Biind Plate to Cable Cover, See (Pic.6)

star micronics BU01 Buzzer Unit - Buzzer 4

https://www.starmicronics.co.th/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals