Star Micronics BSC10E Fast Thermal Desktop Printer User Guide

Micronics BSC10E Fast Thermal Desktop Printer
User Guide

BSC10E Fast Thermal Desktop Printer

How to configuration BSC10E for printing 48 Character/Line and Darkest Font
Connect printer through LAN Cable for get IP Address

1. Download and Install Utility > http://www.starmicronics.com/support/ Select same as below
2.  Click BSC10 Installation CD V2.1 for download
3. After download done, Go to that file and right click at “Autorun” and click “Run as administrator”
4. Click “Install”
5. Check “I Agree” then click “Next”
6. Click “Next”
7. Check I accept… then click “Next”
8. Click “Typical”
9. Click “Install” and waiting till finished
10. Click “Finish”
11. Open the program “Printer Utility BSC10”
12. Click “Ethernet > Search Network” and waiting till get IP Address then click “Done”
13. Click “OK” if do not want to change printer name
14. Click “OK”
15. Click “Printer Setting” and waiting till finished download current configuration
16. Setting at Paper Size to 80mm x Receipt (48 Columns) and Printer Density to +3 (Darkest)
17. Click “Store” for save configuration then click “OK”
18. Click “Printer Setting” for printing self-test of the printer (Should be same as next picture)

References

• Global Support Site - Star Micronics Global Support Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>