star micronics BSC10UD Affordable Fast Thermal Desktop Printer Instruction Manual
- June 12, 2024
- Star Micronics
Table of Contents
How to setting Traditional Chinese Character for Star BSC10
Instruction Manual
BSC10UD Affordable Fast Thermal Desktop Printer
This sample is using BSC10UD model
This sample is connecting through USB Cable from printer to Windows PC
- Install driver printer by download from http://www.starmicronics.com/support/ and select by following below picture.
- Click “BSC10 Installation CD V2.1*” to download to your PC
- Then please install driver printer into your PC (While installing, please do not connect printer to PC)
- After finished installed, Connect printer to Windows PC then open the program “Printer Utility BSC10”
- Select “USB”, you will be found automatic driver printer > Click “Done”
- If you don’t want to replace a new printer name > click “OK”
- Click “Printer Setting”
- Change setting at Asian Character (DBCS) > Double-Byte Character Set (DBCS) > Click “Store”
- Click “OK”
- Click “Print Setting” for printing self-test of the printer.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>