thermaltake Pacific SR360 Slim Radiator Installation Guide
- June 16, 2024
- thermaltake
Table of Contents
thermaltake Pacific SR360 Slim Radiator
Product Information
The Pacific SR360 Slim Radiator Series is a high-performance radiator designed for water cooling systems. It comes with 12 units of part A, 12 units of part B, and 12 units of part C.
Specifications
- Model: Pacific SR360 Slim Radiator Series
- Quantity: 12 units
Product Usage Instructions
Parts List
- A x 12
- B x 12
- C x 12
Installation Guide
Follow these steps to install the Pacific SR360 Slim Radiator Series:
- Ensure that you have all the necessary parts from the parts list.
- Refer to the installation guide for detailed instructions on how to install the radiator.
Side Panels Detachment Guide
If you need to detach the side panels of the radiator, please follow these steps:
- Use a T8 Torx Screwdriver to remove the screws holding the side panels in place.
- Gently detach the side panels from the radiator.
Pre-Use Recommendations
Thermaltake recommends the following steps before using the Pacific series radiators and water blocks:
- Flush and rinse your radiators and water blocks with distilled water to ensure a clean loop.
- Avoid using tap water or distilled water as your coolant, as it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, for optimal performance and corrosion protection.
- Before storing your water-cooling components, clean, rinse, and dry them to ensure a longer lifespan.
FAQ
-
Q: Can I use tap water as my coolant?
A: No, it is not recommended to use tap water as it may harm your loop and reduce performance. It is best to use market-proven pre-mix coolant like Thermaltake Coolant 1000. -
Q: How many units of each part are included in the package?
A: The package includes 12 units each of part A, part B, and part C.
Parts List
Scan Here
Installation Guide
Side Panels Detachment Guide
Please use the T8 Torx Screwdriver
CAUTION
Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water before use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water-cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
© 2023 Thermaltake Technology Co., Ltd. All Rights Reserved. www.thermaltake.com