SoundCore Space One Over-Ear Headphones A3035 User Manual

SoundCore Space One Over-Ear Headphones A3035

USER MANUAL

soundcore Space One  soundcore.com/support

SUPPORT

Please visit www.soundcore.com/support for more information.

APP

Download the soundcore app to switch ambient sound modes, adjust EQ settings, update firmware, and explore more.

WEARING

Wear the headphones with the “L” logo on your left ear and “R” logo on your right ear.
Adjust the length of the headband for a comfortable fit.

CHARGING

Fully dry the USB port before charging.

POWERING ON & PAIRING

Auto Pairing: Press and hold the power button for 3 seconds to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select “soundcore Space One” on your device’s Bluetooth list to connect.

Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and above) via Fast Pair enabled by Google.

MULTIPOINT CONNECTION

The headphones can connect with two devices at the same time.
When already connected to one device, press the power button twice to pair with another device.

BUTTON CONTROLS

• You can enable Normal mode in the soundcore app.
  ×1: Press once ×2: Press twice
  2s: Press and hold for 2 seconds

3s: Press and hold for 3 seconds

NOISE CANCELLATION

To reduce ambient noise, switch to noise cancellation (default) via the NC button and customize it in the soundcore app.

– Adaptive Noise Cancelling: Adjust the level of noise cancellation automatically for various scenarios.
– Custom Noise Cancelling: Set the level of noise cancellation manually.

TRANSPARENCY

To stay aware of your surroundings while listening to music, switch to transparency mode via the NC button and customize it in the soundcore app.

– Custom Transparency Mode: Set the level of transparency manually.

EASY CHAT

Easy Chat mode automatically lowers the volume of music and amplifies the voice of the person you’re talking to so that you can communicate without taking the headphones off.

– To activate Easy Chat, hold the left panel for 1 second until you hear a notification sound. Turn off this mode by releasing your hand. (Enabled in app)
– Easy Chat will automatically turn on when you’re talking, and off when you stop talking for 5 seconds. (Enabled in app)

WEARING DETECTION

Auto-pause music playback when removing the headphones, wear them again to resume.

*You can enable Wearing Detection in the soundcore app.

LDAC

Enable LDAC in the soundcore app for higher-quality audio.

*Only available on devices powered by Android 8.0 or later.

WIRED LISTENING

Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode.

RESET

Press and hold the volume up and power button simultaneously for 5 seconds until the LED flashes red three times.

LED LIGHT GUIDE

Customer Service

18-month limited warranty

Our warranty is additional to the legal rights consumers have buying this product

service@soundcore.com
support.mea@soundcore.com (For Middle East and Africa Only)
support@anker.com

+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
03 4455 7823 (日本)
+86 400 0550 036 (中国)
+82 02-1661-9246 (한국)
+971 529750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)

Input: 5V 0.58A
Playtime (varies by volume level and content): Up to 40 hours (ANC on); Up to 55 hours (ANC off)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany

BLUETOOTH

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license.Other trademarks and trade names are those of their respective owners.

FCC ID: 2AOKB-A3035
IC: 23451-A3035
210-213647

FAQ

Soundcore Space One Headphones FAQ:

Specifications

How to Power on Space One

Press and hold the power button for 3 seconds to turn on the device

How to Power Off Space one

After it’s on, press and hold the power button for 3 seconds to turn it off

Music Playback Control Related

1. Short press the volume button to increase or decrease the volume.

2. Long press the volume “+” button for 2 seconds for the next track, long press the volume “-” button for 2 seconds for the previous track.

3. Short press the power button to play/pause.

How to Activate Voice Assistant

Long press the play/pause button for 2 seconds while in standby or music playing mode

How do I control calls with Space One?

1. Press the play/pause button once to answer a call

2. Press the play/pause button once to end a call

3. Press and hold the play/pause button for 2 seconds to reject an incoming call

4. During a call, press and hold the play/pause button for 2 seconds to toggle between the mute and unmute states. A prompt tone will indicate a successful switch.

What do the Bluetooth Indicator and Prompt Tone mean?

Power on| Power on tone, battery level voice prompt, power indicator flashes white 3 times and then turns off.
---|---
Power off| Power off tone, power indicator flashes white 3 times and then turns off.
Bluetooth pairing mode| Enters pairing mode with a prompt tone, power indicator flashes blue.
Bluetooth pairing success| Bluetooth pairing success tone, power indicator stays on for 3 seconds and then turns off.
Bluetooth disconnection| Bluetooth disconnected tone, no light effect.
Reconnection mode| Prompt tone, power indicator flashes slowly in blue.

Is Space One waterproof and sweatproof?

Due to structural limitations, headband products, especially in areas such as USB and AUX-in, have a high risk of water and sweat ingress. Therefore, the product itself does not have waterproof and sweat-proof characteristics. However, in terms of craftsmanship, UV protection glue technology has been added to the main risk components and key solder points of the internal PCBA to protect these critical areas with UV glue and reduce the risk of the entire machine.

Why is the mute icon on the calling software not synchronized with the

microphone status of the headphones?

On uncertified calling software, the mute icon of the software will not change with the mute/unmute status of Space One’s microphone, but the mute/unmute function on both the software and headphone side can still work normally.

Why is there no change in call sound quality after adjusting the EQ on

the soundcore app?

The EQ in the soundcore app only affects media sound quality and has no effect on call sound quality

What should I do if the headphones enter the call mode abnormally?

When opening the input/output settings page of the computer system, the headphones will enter into the HFP mode (i.e. call state). Please close the settings page.

What should I do if I cannot enter the soundcore app?

When the headphones are connected to two devices at the same time, the soundcore app can only be accessed on one of the devices. Please make sure that the soundcore app is not open on both devices at the same time. If it is, please delete soundcore app from one of the devices and try again.

How should I deal with foreign objects and liquids entering the charging

port?

Be careful to clean up any foreign objects and liquids in the charging port, and let it air dry for 24 hours before charging again.

What’s the play time?

Tested battery life data for playing specified music on iPhone at 50% volume:

1. ANC: 40 hours

2. Transparency: 40 hours

3. Normal: 55 hours

4. Fast Charge 5 min: 4 hours under Normal mode.

A guide about the Battery Level Indicator and Prompt Tone

1. Half an hour before the battery is depleted: Power indicator flashes once every 20 seconds.

2. Charging: Power indicator stays on in red.

3. Fully charged: Power indicator turns off.

4. Battery level below 10%: Power-on prompt for low battery level.

5. Battery level between 31% and 69%: Power-on prompt for medium battery level.

6. Battery level above 70%: Power-on prompt for high battery level.

How to do Firmware Upgrades

1. You can upgrade the headphone firmware through a pop-up window in the soundcore app.

2. You can also upgrade the firmware in the “Update Firmware” section of the soundcore app’s settings menu.

How to Enable the Wear Detection Function

The automatic play/pause feature (Wearing Detection) is turned off by default. Please remove the dustproof sticker on the sensor detection hole inside the left earpads. Enable the “Wearing Detection” in the upper right corner of the soundcore app to activate the Wearing Detection feature.

What should I do if there is an electrical current sound when connecting

to AUX-in cable?

There may be electrical noise when charging the device while using AUX-In cable. It is recommended to unplug the charging cable and only use battery power when using the device, or use a three-prong grounded plug.

What should I do if the sound does not output from the headphones after

answering a phone call through a mobile phone?

When headphones are connected to an iOS system phone, if the answer/hang-up button on the headphones is used to answer a call, the phone will select the headphones as the output device. If the call is answered on the phone, the phone’s speaker will be selected as the output device. To make the output default to the headphones, go to Accessibility-Touch-Call Audio Routing and select “Bluetooth Headset”.

What should I do if there is no sound when switching multipoint

connections?

At times you may find that apps running in the background contain dynamic/silent advertisements. This can cause audio playback interference when switching to a second device in multipoint mode. If you experience no sound output when changing between devices, try closing all apps on the initial device and removing any background music software then try switching devices again.

Why is there no change in call sound quality after adjusting the EQ on

the soundcore app?

The EQ in the soundcore app only affects media sound quality and has no effect on call sound quality

If you encounter any other issues or your issue has not been resolved, please contact soundcore customer support for further assistance.

DOWNLOAD

SoundCore Space One Over-Ear Headphones A3035 Quick Start Guide – [Download PDF]

A3035 Maintenance Analysis Diagram – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>