STAR MICRONICS How to Setting Printer BSC10 to Support 58mm Paper Size Instructions
- June 12, 2024
- Star Micronics
Table of Contents
How to setting Printer BSC10 to support 58mm paper size
How to Setting Printer BSC10 to Support 58mm Paper Size
Please install driver printer before setting
This manual is using BSC10UD and connecting through USB Port
- Connect USB Cable between printer to Windows PC and turn it on then Windows will get automatic Star BSC10 drive printer [Check in Control Panel]
- Right click at Star BSC10 > Printer Properties
- Select Advance > Printing Defaults…
- Click Advanced…
- Change Paper Size to 58mm X Receipt (33 Columns) then click OK 2 times
- Select Device Setting and change FRICTION to 58mm X Receipt (33 Columns) then click OK
- Right click at Star BSC10 > Printer Properties again
- Select Star / Help and click Open Printer Utility
- Click OK if do not change printer name in this utility
- Click Printer Setting and program will download current setting
- Change Paper Size to 58mm x Receipt (33 Columns)
- Click Store to save setting
- Click Print Settings to print self-test
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>