VIMAR 01545 WELL CONTACT PLUS Instruction Manual

: June 12, 2024
: VIMAR

Table of Contents

VIMAR 01545 WELL CONTACT PLUS
Product Usage Instructions
CHARACTERISTICS
INSTALLATION RULES.
FRONT VIEW AND CONNECTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VIMAR 01545 WELL CONTACT PLUS

Product Information:

The WELL-CONTACT PLUS 01545 is a web server designed for local and remote supervision of the KNX system. It is installed on DIN rails (60715 TH35) and occupies 8 modules, each measuring 17.5 mm.

Characteristics:

Installation on DIN rails (60715 TH35)

Installation Rules:

If the consumer unit does not allow optimal insertion of the LAN cable, it is recommended to connect the web server to the network using a UTP category 5e cable (art. 03050, 03050.B, 03051) or UTP category 6 cable (art. 03071) with the provided RJ45 connectors.

Conformity:

LV directive
EMC directive
Standards EN 60950-1, EN 50491

Attention:

The installer manual can be downloaded from the Vimar website under the Products section. Search for the code 01545 and select Sheets, Manuals, Documentation MI.

The user manual can be downloaded from the Vimar website under the Downloads section. Navigate to Software -> Web Sever KNX.

Product Usage Instructions

Ensure that the consumer unit allows optimal insertion of the LAN cable. If not, follow the next step.
If the LAN cable cannot be optimally inserted, connect the web server to the network using a UTP category 5e cable (art. 03050, 03050.B, 03051) or UTP category 6 cable (art. 03071). Connect the cables to the provided RJ45 connectors.
Install the web server on a DIN rail (60715 TH35) using 8 modules of space (each module measures 17.5 mm).
Ensure that the installation follows the LV directive, EMC directive, and standards EN 60950-1, EN 50491.
For more detailed instructions, download the installer manual from the Vimar website. Search for the code 01545 and select Sheets, Manuals, Documentation MI.
For additional information on product usage, download the user manual from the Vimar website. Go to Downloads -> Software -> Web Sever KNX.

Web server for local and remote supervision of the KNX system, installation on DIN rails (60715 TH35), occupies 8 modules size 17.5 mm.

CHARACTERISTICS

Power supply: 12 – 30 V d.c. connecting, via specific terminal supplied, the power supply art. 01830.
Consumption:
- 210 mA at 12 V d.c.
- 85 mA at 30 V d.c.
Dissipated power: 4 W.
Operating temperature -5 °C – +45 °C (indoor).
8 modules size 17.5 mm; installation only on DIN rails (60715 TH35).

INSTALLATION RULES.

Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.
Before working on the system, cut off power with the main switch (fig. 1).
If there is the multimedia video touch screen art.
21553.2, make the connections illustrated in fig. 2.

VIMAR-01545-WELL-CONTACT-PLUS-2

IMPORTANT: If the consumer unit in which the web server 01545 is installed does not enable optimal insertion of the LAN cable, make the connection to the network by wiring a UTP category 5e cable (art. 03050; 03050.B; 03051) or UTP category 6 cable (art. 03071) to the specific RJ45 connectors supplied.

CONFORMITY.
LV directive. EMC directive.
Standards EN 60950-1, EN 50491.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WARNING:
The installer manual can be downloaded from the website www.vimar.com under the section Products Products catalogue. Enter the 01545 code in the find box and then select Sheets, Manuals, Documentation MI.
The user manual can be downloaded from the website www.vimar.com under the section Downloads
Software Web Sever KNX.

RAEE – Informazione agli utilizzatori
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center,or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without
any new purchase obligation) to retailers with a sales area of at least 400 m2, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.