SENA Motorcycle Bluetooth Helmet User Guide

SENA Motorcycle Bluetooth Helmet

Product Information

The product is a motorcycle helmet with various features and components:

• Shield Visor
• Inner Sun Visor
• Speaker
• Breath Guard Chin Vent
• Microphone
• Top Vent
• Side Vent
• Shell
• Shield Ratchet
• Inner Sun Visor Lever
• Charging & Wi-Fi Status LED
• (+) Button
• Center Button
• (-) Button
• Mesh Intercom Button
• Bluetooth System’s Buttons
• Strap Adjuster
• Chinstrap
• One-touch Buckle Quick-Release Retention System
• Rear Vents
• LED Taillight
• Magnetic DC Power Charging & Firmware Upgrade Port
• Pinhole Fault Reset Button

Product Usage Instructions

Putting on the Helmet

To put on the helmet:

1. Unfasten the chinstrap using the retention system.
2. Expand the helmet opening with your hand.
3. Slide your head into the helmet.
4. Fasten the chinstrap as tight as possible without causing pain.

Basic Operations

To perform basic operations:

• Powering On: Press and hold the power button for 1 second.
• Powering Off: Tap the power button once.
• Volume Up: Tap the volume up button once.
• Volume Down: Tap the volume down button once.

Phone Pairing

To pair your phone with the Bluetooth system:

1. When you turn on the Bluetooth system, it will enter phone
   pairing mode (indicated by a blinking LED).

2. Select “Stryker” in the list of Bluetooth devices detected on
   your phone.

Using the Phone

• Answer a Call: Tap the button once.
• Reject a Call: Hold the button for 2 seconds.
• End a Call: Hold the button for 2 seconds.

Siri and Google Assistant

To activate Siri or Google Assistant installed on your
phone:

• For Siri: Say “Hey Siri” or hold the button in standby mode for 3 seconds.
• For Google Assistant: Say “Hey Google” or hold the button in
  standby mode for 3 seconds.

Music Control

• Play/Pause: Hold the button for 1 second.
• Track Forward: Hold the button for 1 second.
• Track Backward: Hold the button for 1 second.

Mesh Intercom

The helmet supports two types of mesh intercom:

• Open Mesh: Communication within the same channel.
• Group Mesh: Communication within the same private group.

To control mesh intercom:

• Turn On Mesh Intercom: Tap the button once (LED will start blinking).

• Turn Off Mesh Intercom: Tap the button once.

• Open Mesh Channel Setting: Enter into the channel setting by
  tapping the button twice or pressing “#” once.

• Save the Channel: Tap the button once.

Group Mesh

To create or join a Group Mesh:

1. Creating a Group Mesh:
   • Multiple Open Mesh users enter Mesh Grouping to create a Group Mesh by holding the button for 5 seconds.
   • Once Mesh Grouping is completed, users will hear a voice prompt indicating the switch to Group Mesh.
2. Joining an Existing Group Mesh:
   • One of the current users in an Existing Group Mesh can allow new Open Mesh users to join by holding the button for 5 seconds.

Downloadable Sena Software

Download the SENA MOTORCYCLES App on Google Play Store or App Store.

Download the following items at sena.com or on the SENA MOTORCYCLES App.

Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.

SENA Technologies, Inc. Customer Support: sena.com

Product Details

Putting on the Helmet

1. Unfasten the chinstrap by using the retention system.
2. Expand the helmet opening with your hand, and slide your head into the helmet.
3. Fasten the chinstrap as tight as possible without causing you pain.

Icon Legend

Basic Operations

Checking the Battery Level

Phone Pairing

When you initially turn on the Bluetooth system:

Note

• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
• For more information on phone pairing, refer to the User’s Guide.

Using the Phone

Siri and Google Assistant

Activate the Siri or Google Assistant Installed on Your Phone

Music Control

Play/Pause

Mesh Intercom™

Open Mesh™: communication within the same channel. Group Mesh™: communication within the same private group.

For more information on Mesh Intercom, refer to the User’s Guide.

Note: When Mesh Intercom is on, the Stryker will automatically connect to nearby Stryker users and the Bluetooth system will be in Open Mesh (default: channel 1) initially.

Open Mesh

Channel Setting (Default: channel 1) in Open Mesh ① Enter into the Channel Setting.

Note: You can use the SENA MOTORCYCLES App to change the channel.

Group Mesh

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each Bluetooth system.

1. Creating a Group Mesh
   Creating a Group Mesh requires two or more Open Mesh users.

Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new users (one or more) in Open Mesh to join the Existing Group Mesh.

Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a Mesh Intercom.

Reset Mesh

If a Bluetooth system in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).

Bluetooth Intercom

Up to three other people can be paired with the Bluetooth system for Bluetooth intercom conversations.

Intercom Pairing
There are two ways to pair the Bluetooth system.

Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom communication by scanning the QR code on the SENA MOTORCYCLES App without remembering the button operation.

1. Pair the mobile phone with the Bluetooth system.

2. Open the SENA MOTORCYCLES App and tap (Smart Intercom Pairing Menu).

3. Scan the QR code displayed on your friend (B)’s mobile phone.
   • Your friend (B) can display the QR code on the mobile phone by tapping > QR code on the SENA MOTORCYCLES App.

4. Tap Save and check that your friend (B) is paired with you (A) correctly.

5. Tap Scan and repeat steps 3-4 to pair with Intercom Friends (C) and (D).
   Note: The Smart Intercom Pairing (SIP) is not compatible with Sena products that use Bluetooth 3.0 or below.

Using the Button

1. Users (You, B) enter into Intercom Pairing.

2. The two Bluetooth
   systems (A and B) will be automatically paired.

3. Repeat the steps above to pair with other Bluetooth systems (C and D).

Last-Come, First-Served

If a Bluetooth system has multiple paired Bluetooth systems for intercom conversations, the last paired Bluetooth system is set as the First Intercom Friend.

Two-way Intercom

FM Radio

Note: You can also save the current station from the SENA MOTORCYCLES App.

LED Taillight

You can control the LED taillight through the SENA MOTORCYCLES App.

Mode : Solid / Night Flash / Day Flash / Off

Configuration Menu

Accessing the Configuration Menu

Troubleshooting

Factory Reset

Fault Reset

Quick Reference

1.0.0_EN_January2022

References

• SENA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>