JBL FLIP6 Bluetooth Speakers User Guide
- June 12, 2024
- JBL
Table of Contents
JBL FLIP6 Bluetooth Speakers User Guide
WHAT’S IN THE BOX
Bluetooth pairing
Play
JBL PORTABLE
Use the JBL PORTABLE app for speaker configuration and software upgrade.
TECH SPEC
Transducers: 45 x 80 mm woofer / 1.75 x 3”, 16 mm tweeter / 0.6”
Output power: 20 W RMS for woofer, 10 W RMS for tweeter
Frequency response : 63 Hz – 20 kHz
Signal-to-noise ratio: > 80 dB
Battery type : Li-ion polymer 17.28 Wh (equivalent to 3.6 V / 4800 mAh)
Battery charge time : 2.5 hours (5 V / 3 A)
Music play time : up to 12 hours (dependent on volume level and audio
content)
Cable type: USB – C charging cable
Cable length: 1.2 m / 47.2”
Bluetooth® version: 5.1
Bluetooth® profile: A2DP 1.3, AVRCP 1.6
Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz
Bluetooth® transmitter power: ≤ 10 dBm (EIRP)
Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
2.4GHz SRD frequency range: 2407 MHz – 2475 MHz
SRD transmitter power : < 10 dBm (EIRP)
Product dimensions (W x H x D): 178 x 68 x 72 mm / 7.0 x 2.6 x 2.8”
Net weight: 0.55 kg / 1.21 lbs
Packaging dimensions (W x H x D) : 216 x 106 x 99 mm / 8.5 x 4.2 x 3.9”
Gross weight: 0.92 kg / 2.05 lbs
Maximum operation temperature : 45 °C
To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Flip 6 to liquids without removing cable connection. Do not expose JBL Flip 6 to water while charging. It may result in permanent damage to the speaker or power source.
Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after
use. After a liquid spill or rinsed, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker.
With USB-C charging protection, a reminder sound will alert you to unplug if the connector detects water, salt, or any other chemicals.
When using an external adapter, the output voltage/current of the external adapter should
not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names
are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>