VIMAR SS120-230V- 50-60 Sound System Instructions
- June 12, 2024
- VIMAR
Table of Contents
VIMAR SS120-230V- 50-60 Sound System
Important Information
Power supply for Sound System entry phone with 12 Vac output, 120/230 Vac 50/60 Hz power supply, for DIN rail (60715 TH35) or wall mounting, occupying 3 x 17.5 mm module
Technical characteristics
- Power supply: 120/230 Vac
- Maximum power consumption at 120V: 0.26 A
- Maximum power consumption at 230V: 0.13 A
- Dissipated power: 9.7 W
- Output voltage: 12 Vac nominal (SELV – EN60950-1).
- Maximum current output: 0.8 A continuous + 1A INT. with cycle 10s ON – 150s OFF
- Operating temperature: -5 °C to +35 °C (indoor)
- 3x 17.5 mm modules, dimensions: 53x97x63 mm
- For installation in consumer units with DIN rail (60715 TH35), or wall-mounting with masonry plugs and screws provided.
- CLASS II symbol
Installation
Installation rules
-
Installation should be carried out by qualified personnel in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.
-
Ensure clearance around the device so there is sufficient ventilation.
There must be no dripping or splashes of water on the device. -
WARNING: To prevent injury, the appliance must be secured to the wall as described in the installation instructions.
An easily accessible bipolar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply unit.
Regulatory compliance
- LV Directive. EMC Directive. RoHS directive.
- Standards EN 61558-2-6, EN 61000-6-1, EN 61000-6- 3, EN IEC 63000.
- REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
- The power supply units constitute a SELV source in observance of the requirements set out in Article 411.1.2.2 of CEI standard 64-8 (ed. 2012)
WEEE
- WEEE – Information for users. If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m2, if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials
- Pour informations détaillées voir www.vimar.com
Customer Support
49401227A0 02 2201
Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>