VIMAR 20292.AC USB Power Supply Instructions
- June 12, 2024
- VIMAR
Table of Contents
LINEA: 30292.ACx
EIKON: 20292.AC
ARKE’ :
19292.AC
19292.AC.AB
PLANA: 14292.AC
Instructions
20292.AC USB Power Supply
**** Read the instructions before installation and/or use
FRONT AND REAR VIEWS
Type A USB port- Type C USB port
N.B. Graphic representation of the Linea series. Position of terminals, wiring and functions also identical for
FEATURES
| Power supply | 120-240 V~ 50/60 Hz |
|---|---|
| Power consumption | 230 mA – 120 V~ |
145 mA – 240 V~
Output voltage
| 5.0 V d.c. (± 5%) ES1
Max output load| A 2.4
Output power| 12.0 W
Average efficiency in active mode| 82.5%
Efficiency with low load (10%)| 80%
Power with no load| 0.06 W
Protection degree| IP20
Operating temperature| 0 °C – +35 °C
Device in class II|
Installation for CAT III overvoltage category
INSTALLATION RULES
Installation must be carried out by qualified persons in compliance with the
current regulations regarding the installation of electrical equipment in the
country where the products are installed. The device can be installed in a
flush mounting box or surface mounting box and completed with Linea, Eakin,
Ark, or Plana cover plates in dust-free places, protected from accidental
impacts and away from heat sources.
IMPORTANT.
- An easily accessible omni polar disconnection switch with a contact gap of at least 3 mm must be installed upstream from the power supply.
- Install the device at a height of no more than 2 m.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead
DEVICE DETAILS AND WEEE INFORMATION CAN BE DOWNLOADED IN PDF FORMAT FROM THE
PRODUCT DATA SHEET ON www.vimar.com (the QR code
opens the data sheet of art. 30292.ACB, which shares the same instructions
sheet as art.
30292.ACx-20292.AC-19292.AC-14292.AC).
https://www.vimar.com/en/int/catalog/product/index/code/30292.ACB
Viale Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com