SENA Tufftalk Lite Industrial Bluetooth Communication System User Guide

SENA Tufftalk Lite Industrial Bluetooth Communication System User Guide

PRODUCT FEATURES

The Tufftalk Lite (Hard Hat Mount Type) is designed to provide moderate to very high level attenuation and meet the needs of an extensive range of industrial application. With built-in Bluetooth® capabilities, blast your favorite tunes and talk over the intercom with your buddies.

NRR of 20 dB SNR of 27 dB

 Bluetooth® 4.1

  4-Way Intercom

  Intercom up to 800 m (0.5 mi)

  Music Sharing

  Advanced Noise Control

in open terrain

GETTING STARTED

1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENAINDUSTRIAL.COM.
2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit senaindustrial.com to see how to update your product.

SENA Technologies, Inc.
Customer Support: senaindustrial.com

PREPARATION

Knowing the Headset Layout

Installing the Headset

Replacing the Ear Pads of the Tufftalk Lite

Use your fingers to remove the ear pads and insert the included ear pads.

Sena Industrial App

By simply pairing your phone with your headset, you can use the Sena Industrial App for quicker and easier set up and management.

• App Features
  • Music, FM Radio, Device settings, Quick Start Guide, and User’s Guide
• Download
  • Android: Google Play Store > ‘Sena Industrial’
  • iOS: App Store > ‘Sena Industrial’

Sena Device Manager

The Sena Device Manager allows you to upgrade the firmware and configure its settings directly from your PC or Apple computer. Download the Sena Device Manager from senaindustrial.com.

BASIC OPERATION

Operating the Buttons

Tap the button

Double tap the button

Press and hold the button for 5 seconds

Press the two buttons at the same time

Press one of the two buttons

Turning On/Off the Headset

Turning On
Press and hold the (+) Button and the Center Button for 1 second.

Turning Of

Tap the (+) Button and the Center Button.

Adjusting the Volume

 You will hear a beep when the volume reaches the maximum or minimum level.

Checking the Battery Level

Blinking  70~100%
Blinking  30~70%
Blinking  0~30%

Turn on the headset and check the battery level via the Status LED.

“High” 70~100%

“Medium” 30~70%

“Low” 0~30%

Or, press and hold the Center Button and the (+) Button for 3 seconds when the headset turns on. You will hear a voice prompt.

Charging the Battery

PAIRING

Pairing with Mobile Devices – Phone, Music

“Phone pairing

Your headset is paired

Your headset is paired

Using Phone Features

After Pairing

Ending Calls

Rejecting Calls

Making Calls
Using the Phone Keypad

Using the Voice Dialer

Using the Speed Dial

You will hear a beep

“Speed dial”

Voice Menu

• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel

Listening to Music

After Pairing…

Playing or Pausing Music

 until you hear a double beep

Tracking Forward or Backward

Press and hold the
(+) Button or the
(-) Button for
1 second.

INTERCOM

Pairing with Other Headsets

Follow the steps above to pair with two or more headsets.

Using the Intercom

After Pairing

You can start or end a two-way intercom conversation with each head

Using the Group Intercom

Group intercom
Group intercom terminated

RADIO

Turning On/Off the FM Radio

You will hear a double beep sound
“FM on” or “FM off”

Seeking Stations

Double tap the (+) Button or the (-) Button

Double tap the (+) Button or the (-) Button

Listening to Preset Stations

Saving or Deleting Stations

SETTING

Using the headset

You will hear a double beep sound
Configuration menu

TROUBLESHOOTING

Factory Reset
If you want to restore the Tufftalk Lite to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.

Fault Reset
If the Tufftalk Lite is not working properly for any reason, push the pin-hole reset button located below the Center Button.

SENA Technologies, Inc.
Customer Support: senaindustrial.com

QUICK REFERENCE

Basic
Operations| Power on| Press and hold the (+) Button and the Center Button for 1 second
Power off| Tap the (+) Button and the Center Button
Volume adjustment| Tap the (+) Button or the (-) Button
Mobile Phone| Answer mobile phone call| Tap the Center Button
End mobile phone call| Press and hold the Center Button for 2 seconds
Voice dial| Press and hold the Center Button for 3 seconds
Speed dial| Press and hold the (+) Button for 3 seconds
Reject incoming call| Press and hold the Center Button for 2 seconds
Music| Play/Pause Bluetooth music| Press and hold the Center Button for 1 second
Track forward/backward| Press and hold the (+) Button or the (-) Button for 1 second
Type| Operation| Button Command
---|---|---
Intercom| Intercom pairing| Press and hold the Center Button for 5 seconds
Tap the Center Button of any one of the two headsets
Start/End each intercom| Tap the Center Button
FM Radio| FM radio on/off| Press and hold the (-) Button for 1 second
Select preset| Press and hold the Center Button for 1 second
Seek stations| Double tap the (+) Button or the (-) Button
Scan up FM band/stop scanning| Press and hold the (+) Button for 1 second

References

• Sena Industrial US | Communication Technology with Superior Industrial Performance | Sena

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>