TC S7-700W Portable Power Station User Manual
- June 12, 2024
- TC
Table of Contents
- S7-700W Portable Power Station
- Product Version Change Description
- Product Description
- Product specirncations
- Lithium iron phosphate protection plate battery characteristics
- Product discharge time
- Product reliability testing
- Product Function Description
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
S7
Portable Power Station
700W/120000mAh
700w
MAX POWER & 120000mAhK
POWER STATION
S7-700W Portable Power Station
| Prepared By | Checked By | Approved By |
|---|---|---|
Client acknowledgement:
Signature:
Date:
Product Version Change Description
| Versions | Content Description | Modified by | Approver | Effective date |
|---|
Product Description
This manual applies to the relevant characteristics of the Sany Smart portable
mobile energy storage power supply S7 and is the basis for product design,
production and inspection.
The design system consists of a ternary lithium 851P battery protection board,
PD circuit, DC charging circuit, MCU control circuit, bi-directional inverter
circuit and LCD screen.
Inverter 700W pure sine wave AC110V/(220V)/50Hz/60Hz,DC12V/10A,USB QC3.0,
TYPE-C PD3.0. suitable for camping, emergency communication, medical rescue,
fire rescue etc.
Product specirncations
| Model | 57 Portable Power Station |
|---|---|
| Capacity | 15000mAh*8 strings 1 parallel 120000mAh |
| Products Size | 28cmx18.3cmx20.7 cm |
| G.W/ N.G | |
| Cell | LiFePO4/15000mAh |
| AC Power | Sine wave AC 700W 110V 60Hz |
| AC Peak Value | 1100W |
| Conversion Efficiency | >90% full load |
| Category | Project |
| --- | --- |
| INPUT | DCinput |
| AC input | 110V/60HZ 300W MAX |
| AC OUT | AC output voltage |
| ACoutput power | Rated 700W |
| AC output waveform | Pure sine wave |
| Peak | 1100W peak sustain time <300ms |
| Frequency | 50Hz/60Hz |
| USB output | USB-A-1*2 outputs |
| USB-A-2*1 output | 5V/9V12V 24W MAX |
| USB-C*2 output | 5V/9V/12V/15V/20V 100W MAX |
| DC 12V output | DC5521*2 output |
| DC car charger output | 13.6V/10A |
| Electric cores | Type |
| Capacity | 120000mAh |
| Number of cycles | 3000i% |
| Charging Time | DC |
| AC | Fastcharging < 1.6 hours, slow charging < 5 hours |
| Screen display information | USB, TYPE-C, DC status (active status icon lit) |
Switch controlled by keypad
ACIN, ACOUT, SOLAR status (active status icon lit)| ACOUT is switched by key
control; ACIN, SOLAR are automatically controlled by input detection
Remaining capacity SOC| Percentage, 10 cell power column (10% per cell)
Time remaining| Minimum display in minutes, maximum display 99 hours
Warning Message| Over temperature, overload
Fan status| Rotate, stop
Power=-on static power consumption| |
Over temperature protection| Over temperature protection| Percentage, 10 cell
power column (10% per cell)
Overtemperature recovery| Minimum display in minutes, maximum display 99 hours
Over temperature protection| Discharge| Overtemperature, J overload
Charging| Rotate, stop
Lithium iron phosphate protection plate battery characteristics
| Project | Parameter symbols | Details | Standard values |
|---|---|---|---|
| Overcharge protection | Overcharge detection voltage | 3.65V | |
| vCL | Overcharge release voltage | 3.55v | |
| Over-discharge protection | VDL | Over-discharge detection voltage | 2.70v |
| VDR | Over-discharge discharge voltage | 3.0v | |
| Overcurrent protection /overload protection | 53A | ||
| Protection release conditions | Disconnecting | ||
| Over temperature protection | Charging over-temperature protection | 50°C | |
| Charge over temperature recovery | 45°C | ||
| Discharge over-temperature protection | 60°C | ||
| Discharge overtemperature recovery | 55°C | ||
| Short circuit protection | Short circuit protection conditions |
Shortcircuitin external circuit
| Short circuit protection
release conditions| Disconnecting short-circuit loads
Current consumption| IDD| Internal circuit consumption
during operation| 150mA
Product discharge time
Digital camera 16wh| Drones 45wh| Mobile phone charging 10wh|
Refrigerator 60w
---|---|---|---
| | |
Camping light 10w| Ventilator 40w| |
| | |
Product reliability testing
Serial number| Test items| Insoection standard| Testb
result
---|---|---|---
1| Constant temperature and humidity testing| putthe fully charged power
supply into a temperature-controlled box at 40°Cx5°C and relative humidity of
90%-95% for for 12 hours, and after removing it, place itat an ambient
temperature of 25°C+5°C for 2 hours and then test the performance of the
product. The performance of the product isthentested.| 0K
2| High temperature test (discharge)| Place the fully charged power supply
into a high temperature chamber at an experimental temperature of 55°C + 5°C
for 2 hours and then remove Place in ambient temperature of 25°C+5°C for 2
hours and then test the performance of the product.| oK
3| Low temperature test (discharge)| Putthe fully charged power supply into
the experimental temperature -10°C+5°C cryostat, place it for 2 hours and then
remove itin ambient temperature of 25°C5°C for 2 hours and then test the
performance of the product.| oK
4| High temperatured test (charging)| Place the discharged power supply in a
high temperature chamber at 25°C+5°C 40°C#5°C for 2 hours and then remove it.
atan ambient temperature of for 2 hours and then measure the performance of
the product. test.| oK
5| Low temperature test (charging)| Putthe discharged power supply into the
experimental temperature ~10°C5°C cryostat, place it for 2 hours and then
remove itin ambient temperature of 25°C+5°C for 2 hours and then test the
performance of the product.| oK
6| Vibration testing| Harmonic vibration at a frequency of 100Hz for not less
than 10 minutes for 10 minutes, followed by experiments Testing of product
performance.| ok
7| ESD Testing| Contact discharge: 3V for 10 seconds 1 time every 1 second for
10 seconds, then test the product performance after the experiment.| ok
List of standard equipment
| No | Specification | Number | Material code |
|---|---|---|---|
| A | S7 Portable Power Station | 1PCS | |
| B | 57 Colour box inside | 1PCS | |
| C | m AC charging cable (input) | 1PCS | E100930019 |
| D | 1.0m car charger input cable (input) | 1PCS | E100930016 |
| E | User manuals &warranty cards | 1PCS |
List of options
| No | Specification | Number | Material code |
|---|---|---|---|
| F | Solar charging cable (MC4 to Anderson port input) | 1PCS | E100920005 |
| G | Car battery charging cable (output) | 1PCS | E100920004 |
| H | Solar panels | 1PCS | E500130001 |
Product Function Description
| No | Interface buttons | Details |
|---|---|---|
| (1) | Switch buttons | Turn on the 57 mobile power station by flicking the |
switch. When the 57 Mobile Power Station is switched on, the display lights up
at the same time; in the power-on state Press the power button briefly to
switch on or off the USB, TYPE-C and cordless charging functions, and press
and hold the power button for 2 seconds to switch off the power.
(2)| Illuminated light/ 10T control switches| (6) lights up in a cool white
light; when the key is pressed again, (6) flashes with the *505 frequency” and
the 0icon lights up; When the key is pressed again, the switch is switched off
(OFF), the light goes out and (6) stops working; When the key is cycled off
(OFF) in this way; When the switch is pressed and held down, the 10T turns on,
the Dicon lights up and the phone can be connected to the 57
(3)| USB-A interface| Stand alone support 5V/2.5A, output support up to 13w
(4)| USB-A interface| Supports QC3.0 protocol, supports 5V/3A, 9V/2A, 12V/1.5A
for standalone use, output supports up to 24w
(5)| USB-Cinterface| SupportPD protocol, 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A,
max output 100W
(6)| LED lighting| Warm White, Cool White, SOS (5W)
(7)| Car charger with DC 5521 interface Output control switch| When turned on
(ON), the indicator lights up (8) and (9) start working and the @icon lights
up, When connected to the device (8) shows the total output power in real
time; when turned off (OFF), the indicator lights go off, (8) and (9) stop
working and the @ icon lights up. The total output power is displayed in real
time when the device is connected; when OFF, the indicator light goes off, (8)
and (9) stop working and the @ icon goes out
(8)| DC5521 interface| Supports 13.6V/3A output
(9)| Car charger interface| Supports 13.6V/10A output
(10)| Wireless chargers| Supports 15W wireless fast charging
| No | Interface buttons | Details |
|---|---|---|
| Ⅰ | AC output control switch | When ON, the indicator lightis on, |
working and the @ icon is on, when the device is connected ®showsthe total
output power in real time; when OFF, the indicator lightis off, | stops
working and the @ icon s off. When the device is connected, the total output
power is displayed n real time; when it is turned off, the indicator light
goes off, 1 stops working and the @ icon goes off
Ⅱ| AC110V*2 outputinterface| Rated output 700W
Ⅲ| Anderson Interface| Supports 10-45V 200W MAX DC charging
Ⅳ| aCchatoaoort| Connects to the grid via the AC connection cable included
with the main unit, supports 100-120V/60Hz300W MAX charging
| No | Display panels | Details |
|---|---|---|
| 1 | USB-Cinterface status indication | Switch control via (“Interface keys” in |
(2))
2| DCinterface status indication| Switch control via (interface keys” in (6))
3| USB-A interface status indication| Switch control via (Interface keys” in
(2))
4| ACOUT interface status indication| Switch control via (“Interface key” in
5| ACIN interface status indication| Theicon lights up when the IV is
connected with electricity and goes out When It1% disconnected
6| Anderson interface charging status indication| When Il is connected with
power, the icon lights up and @ shows the charging power
7| Totalinput power display| Real-time power display when charging the S7
8| Total output power display| Total output power display
9| Ring power indicator ring| Ring-shaped power display with 10 cells, one
cell represents 10% of the battery
10| Fan status display| Icon lights up when the fan is operating and goes out
when the fan is off
| No | Display panels | Details |
|---|---|---|
| 11 | Percentage of power display | Each cellrepresents 10% of the charge |
| 12 | S7 temperature alarm | When the overtemperature is triggered the icon |
flashes for 10 seconds, the S7 switches off all outputs and when the
temperature returns to normal Resume output
13| Overload warning icon| Iconilluminates when the access device of 57 is
overloaded or short-circuited
14| LED lighting icon| Icon lights up when the S7’s LED illumination is
switched on
15| Remaining time and usage status display| When charging, the digit
represents the time required to fully charge, with the minimum display
unitbeing minutes and the maximum
display unit being hours; When discharging, with “USE”, the number represents
the time left to discharge, the minimum display unit is minutes, the maximum
display unitis hours. Maximum display unitis hours
16| ITOicon| The 0T turns on when the switch is pressed and held down (6),
Icon illuminated, phone cal} connect to 57
Product Handling Precautions
- Please use the 57 within the permissible operating temperature range. Use outside the optimum operating temperature may cause the S7 to exceed its safe and effective operating limits.
- Do not submerge the main unitin water, the S7 is not waterproof. Please be careful not to void the terms of the warranty by using itin a waterproof manner.
- Continuous use of high-powered electrical output may result in over-temperature protection due to high host temperature, which is normal, please wait for about 30 minutes to 1 hour before discharging or charging.
- The S7 must be charged with the official charging cable, and we will not be responsible for any consequences caused by charging with non-original accessories. We will not be held responsible for any consequences caused by non-genuine accessories.
- When charging, please place the machine on a level surface with no flammable or combustible materials around and keep an eye on the site while the product is charging to prevent accidents.
- After continuous full discharge, if the product battery is at a high temperature, itis recommended to wait until the machine has cooled down to room temperature before charging. Otherwise there may be a prohibition on charging situation. The rechargeable ambient temperature of the battery is 0°C to 40°C. The ideal charging ambient temperature (22-28°C) can significantly extend the battery The ideal charging temperature (22-28°C) will significantly extend the life of the battery.