tc electronic Helix Phaser Pedal Instructions
- June 1, 2024
- tc electronic
Table of Contents
tc electronic Helix Phaser Pedal
Product Information
Specifications:
- Model: HELIX PHASER
- Version: 3.0
- Language Options: English, Spanish, French, German, Italian, Dutch
Product Usage Instructions
Safety Instructions:
- Please read and follow all instructions provided in the manual.
- Avoid contact with water, except for products designed for outdoor use.
- Clean the device only with a dry cloth.
- Ensure ventilation openings are not blocked during installation.
- Avoid placing the device near heat sources like radiators, stoves, or amplifiers.
- Use only manufacturer-specified attachments and accessories.
- When using carts or stands, take precautions to prevent tip-over accidents.
- Avoid installing the device in confined spaces such as bookcases.
- Do not place any naked flame sources, such as lighted candles, near the device.
Operating Instructions:
To operate the HELIX PHASER:
- Connect the device to a power source using the appropriate cable.
- Adjust the settings according to your preference using the control knobs.
- Connect your audio source to the input of the phaser pedal.
- Connect the output of the phaser pedal to your amplifier or recording device.
- Engage the pedal by pressing the footswitch to activate the phaser effect.
- Experiment with different settings to achieve the desired phasing effect.
FAQ
-
Q: Can I use the HELIX PHASER outdoors?
A: The HELIX PHASER can be used outdoors as long as it is specified for outdoor use in the product details. -
Q: How do I clean the HELIX PHASER?
A: Use a dry cloth to clean the device. Do not use any liquid cleaners or solvents. -
Q: What should I do if the HELIX PHASER gets wet?
A: If the device comes into contact with water, disconnect it from power immediately and allow it to dry completely before use.
Safety Instruction
- Please read and follow all instructions.
- Keep the apparatus away from water, except for outdoor products.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
- Use only specified carts, stands, tripods, brackets, or tables. Use caution to prevent tip-over when moving the cart/apparatus combination.
- Avoid installing in confined spaces like bookcases.
- Do not place naked flame sources, such as lighted candles
- Operating temperature range 5° to 45°C (41° to 113°F).
Controls
- USB – Connects to your computer for firmware updates and TonePrint editing.
- Speed – Controls the speed of the phaser effect.
- Feedback – Controls the amount of signal fed back into the phaser input.
- Output
- Footswitch – Turns the effect on and off.
- Power Input – Connect a 9 V / >100 mA power supply.
- Depth – Controls the intensity of the phaser effect.
- Phaser Type – Choose between Vintage, TonePrint and Smooth settings.
- Mix – Controls the amount of effected signal added to your sound.
- Input
FCC INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used by the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a articular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive
2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>