tc-electronic JUNE-60 V2 CHORUS Chorus with 2 Button Interface and BBD Circuitry User Guide
- June 1, 2024
- tc electronic
Table of Contents
tc-electronic JUNE-60 V2 CHORUS Chorus with 2 Button Interface and BBD
Circuitry
Safety Instruction
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
- Do not install in a confined space, such as a bookcase or similar unit.
- Do not place naked flame sources, such as lighted candles, on the apparatus.
Warning
- As with all small batteries, the batteries used with this product should be kept away from small children who still put things in their mouths. If they are swallowed, promptly call your local poison control center
- Always remove battery if consumed or if product is to be left unused for a long time
- Clean the battery contacts and also those of the device prior to battery installation
- Replacement of a battery with an incorrect type that can defeat a safeguard! Replace only with the same or equivalent type
- Replace all batteries of a set at the same time, ensure the batteries are installed correctly with the regard to polarity (+ and -)
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
- Attention should be drawn to the environmental aspects of battery disposal Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
LEGAL DISCLAIMER
Music tribe accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical specifications, appearances and other
information are subject to change without notice. All trademarks are the
property of their respective owners. Midas, klark teknik, lab gruppen, lake,
tannoy, turbosound, tc electronic, tc helicon, behringer, bugera, aston
microphones and coolaudio are trademarks or registered trademarks of music
tribe global brands ltd. © Music tribe global brands ltd. 2024 All rights
reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support.
Controls and Connectors
-
Input/Output jacks – Connect a ¼” TS cable from your guitar to the INPUT jack.
- Mono setup: Set slider to MONO and connect a ¼” TS cable from the OUTPUT jack to your amplifier.
- Stereo setup: Set slider to STEREO and connect a ¼” TRS split cable from the OUTPUT jack to a pair of amplifiers.
Note: Input impedance has two options designed to optimize performance for guitar or keyboard. Access the internal INPUT LEVEL slide switch (SW6) to choose the optimal option for your setup
-
9 V DC – Connect a standard 9 V power supply (not included).
-
Footswitch – Turns the effect on and off. The LED will light when the pedal is engaged. The pedal operates in true bypass when disengaged.
-
Mode – Press button I or II to select between 2 chorus preset settings. Press buttons I and II simultaneously to activate a 3rd chorus preset setting.
Note: Preset I and II LFO speeds can be changed independently via the internal LFO SPEED DIP switch (SW5).- SLOW = Original JUNO settings (recommended for keyboards)
- FAST = Original JUNE 60 settings (recommended for guitar)
-
Mono/Stereo switch – Select between MONO and STEREO mode.
Internal Option Switches
-
INPUT LEVEL – Select between input impedance for GUITAR or KEYBOARD.
-
LFO SPEED – Select FAST or SLOW for preset I and/or II.
Battery Replacement
Storage
Specifications
FCC INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
Email Address: legal@musictribe.com
JUNE-60 V2 CHORUS
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
Hereby, Music Tribe declares that this product is in compliance with Directive
2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/
EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive
1907/2006/EC.
Full text of EU DoC is available at https://community.musictribe.com/
EU Representative: Music Tribe Brands DK A/S
Address: Gammel Strand 44, DK-1202 København K, Denmark
UK Representative: Music Tribe Brands UK Ltd.
Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>