ca Go Tablet Cargo Box Insert Instruction Manual
- June 12, 2024
- Ca Go
Table of Contents
Tablet
Assembly Instructions
The present assembly instructions is the translation of the original assembly instructions.
Safety notices
These assembly instructions contain various types of notice.
The notices are designed as follows:
Danger
Potential hazards for your health and the health of your co-riders and other
road users if you fail to observe the respective instructions or do not take
corresponding precautions.
Notice
Provides information about how to handle the product or refers to a passage in
the assembly instructions that deserves special attention.
Caution
Warns you about incorrect behaviour that can result in material and
environmental damage.
Separate instructions
Refers you to other assembly instructions for your FS200 Life which describe
the respective assembly step in more detail if needed.
General information
The tray organizes the storage space in the EPP cargo box and provides a shelf
in front of the children transported on Ca Go Child-Seats.
The tray is designed to be hooked into the EPP cargo box and can be loaded
with a maximum of 5 kg.
Intended use
If children are transported in the box, it is essential to ensure that the
goods being carried are securely lashed to the back of the tablet to prevent
them from falling down.
The tablet may be loaded with a maximum of 5 kg.
Check the tablet regularly for damage. Inspect the expander rope just as
regularly for possible cracks.
Before each ride, make sure that the tablet is properly positioned and cannot
slip out of place.
Scope of delivery
The tablet consists of several individual parts. It is delivered pre-assembled
(Fig. 3).
No additional tools are required for assembly.
Assembly
Slide the tablet gently into the recess of the cargo box (Fig. 4).
Press the side hooks of the tablet and push them in completely until the hooks
snap into the side indentations in the box (Fig. 5 und 6).
Check that the tablet rests correctly on the shoulders of the box and is
placed in the indentations provided.
To remove the tablet, press the hooks together once again and pull the tablet
horizontally backwards (towards the handlebar).
General notes of care
The components of the mounting set should only be cleaned with water and mild detergents such as soap.
Do not use aggressive cleaning agents, acids or solvents for cleaning. This may damage the surfaces or the belts. The stability of the components may then no longer be given.
Statutory warranty / guarantee
The legal statutory warranty applies.
You can find more details on the guarantee on our website:
www.cagobike.com
Export to the USA and Canada is not permitted (product liability)!
Service
If you have questions concerning this assembly instructions, please contact
your Ca Go dealer or your Ca Go service team.
Published by:
Ca Go Bike GmbH
Am Autobahnkreuz 7
56072 Koblenz Germany
+49 261 914090-600
info@cagobike.com
www.cagobike.com
Managing directors: Franc Arnold
Company register
Court of record: District Court Koblenz / register no.: HRB 26998 / VAT Id no.
DE326206636
Responsible for distribution and marketing of the assembly instructions: Ingo
Kahnt
Ca Go Bike GmbH reserves the right to change product specifications without
prior notice. Typographical errors, mistakes and
modifications reserved. Version: 03/2023
©Reproduction, reprint and translation, as well as any use for economic
purposes
(including as extracts, in print or electronic form) without prior written
approval is forbidden.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>