inateck M.2 Hard Drive Enclosure Installation Guide
- June 12, 2024
- inateck
Table of Contents
inateck M.2 Hard Drive Enclosure
Product Information
M.2 Hard Drive Enclosure
Installation Guide
- Press down the lock, and then slightly pull out the inner tray of the hard drive enclosure.
- Select a proper slot according to the length of the hard drive, and slide the fixator in. The supported hard drive dimensions include 2242, 2260, and 2280 (2280 hard disks do not require brackets ).
- Lay the hard drive into the inner tray of the enclosure and have it connected to the motherboard interface. Then, fix the hard drive with the fixator.
- First, stick the Silicone heat dissipation Shim under the iron sheet, and then cover the iron sheet on the plastic inner box (note that the bending direction of the iron sheet should be installed downwards). Finally, push the inner tray into the hard drive enclosure to complete the installation.
Package List
- 1 X M.2 Hard Drive Enclosure
- 2 X Fixators
- 1 X Installation guide
- 1 X Silicone heat dissipation Shim
- 1 X CTO C Data Cable
- 1 X CTO A Data Cable
- 1 X Metal plate
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
EU/UK Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/30/EU and SI 2016 No. 1091.
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance Service Center Europe F&M Technology GmbH
- Tel : +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
- Fax : +49 341 5199 8413
- Address : Fraunhoferstraße 7, 04178 Leipzig, Deutschland North America Inateck Technology Inc.
- Tel : +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
- Address : 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Manufacturer
Shenzhen Inateck Technology Co., Ltd. Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China
F&M Technology GmbH Fraunhoferstraße 7, 04178 Leipzig, Deutschland
- Tel : +49 341 5199 8410
Inateck Technology (UK) Ltd. 95 High Street, Office B, Great Missenden, United Kingdom, HP16 0AL
- Tel : +44 20 3239 9869
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>