tp-link LS1008 Desktop Switch Installation Guide
- June 9, 2024
- tp-link
Table of Contents
Installation Guide
Desktop Switch
Desktop Non-PoE Switch
The image may differ from the actual product.
Desktop PoE Switch
The image may differ from the actual product.
Note:
- PoE ports can also connect to non-PoE devices, but only transmit data.
- Reverse PoE switch is a passive PoE switch that gets power from PoE-in ports and supplies power to connected powered device(s) via PoE-out port(s) or DC port. DC port is a power output port, do not connect it to any power source.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Place the device with its bottom surface downward.
The plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be easily accessible.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper
use of the device. Please use this product with care and operate at your own
risk.
TP-Link hereby declares that this device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-
link.com/en/ce.
For technical support, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.
©2020 TP-Link 7106508916 REV1.3.0
Documents / Resources
| tp-
link LS1008 Desktop
Switch
[pdf] Installation Guide
LS1008 Desktop Switch, LS1008, Desktop Switch, Switch
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>