Vitamix VM0219 Immersion Blender Instructions
- June 6, 2024
- Vitamix
Table of Contents
8615 Usher Road, Cleveland, Ohio 44138 U.S.A.
Vitamix immersion Blender
VM0219
| Warning and Caution| | On/Off
---|---|---|---
| NEVER touch moving parts. To avoid injury, keep hands and utensils away from
the blade assembly.| | Parts will become hot with extended use.
| High temperature when blending hot liquids.| | Variable Speed
| Unplug while not in use, before cleaning, changing accessories, or touching
parts that move while the blender is in use.| | Read and understand the
owner’s manual.
To see the complete line of Vitamix® products, visit vitamix.com
SPECIFICATION
Voltage: | 120 V |
---|---|
Frequency: | 60 Hz |
Watts: | 625 Max |
Height: | 17.5 inches (fully assembled) |
Width (motor diameter): | 3 inches |
ERROR CODES
When an error mode is experienced, the Immersion Blender will enter VLS (very low speed) mode and flash a pattern of LEDs to indicate there is an error. This low speed will protect the electronics and motor when in fault mode.
Error Code (Number of LEDs flashing)
| Error Description|
Remedy
---|---|---
5
| Locked rotor| If food becomes lodged around the blending blade or in the blade guard, release the trigger switch, unplug the power cord and remove the blending shaft from the motor body. Use a spatula to dislodge the food. Do not use fingers as the blending blade is sharp.
4
| Motor over temperature| Unplug and allow to cool (30 minutes).
3
| Motor fault| Unplug. Contact Vitamix customer service.
2
| Max runtime reached| Release On/Off button. No cooldown is required. Contact Vitamix Customer Service if the issue doesn’t resolve.
IMPORTANT SAFEGUARD
WARNING: To avoid the risk of serious injury when using your Vitamix® immersion blender and accessories, basic safety precautions should be followed, including the following. READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATION.
Read all instructions
-
Carefully read all instructions before operating the immersion blender for the first time. Save the instructions for future reference.
-
Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge. Close supervision is necessary when used by or near children or incapacitated persons. Children should be supervised to ensure that they do not play with the immersion blender.
-
Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
-
Avoid contact with moving parts.
-
Remove and safely discard any packaging materials and promotional labels before using the appliance for the first time.
-
To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance.
-
To protect against electrical shock, do not immerse the power cord, power plug, or motor body in water or any other liquid.
-
Do not place the appliance on or near a hot gas or electric burner, or where it could touch any other source of heat.
-
Unwind the power cord fully before use.
-
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plugin any way.
-
Do not allow the power cord to hang over the edge of a table or counter, touch hot surfaces or become knotted.
-
Always make sure the appliance is completely and properly assembled before operation.
-
The blending blade assembly is very sharp. Handle carefully and keep out of reach of children.
-
Do not use attachments other than those provided with the appliance or offered separately from Vitamix. The use of attachments not sold or recommended by Vitamix may cause fire, electric shock or injury.
-
Always ensure the appliance is unplugged from the power outlet before attempting to assemble any of the attachments.
-
Use caution when blending in a glass container, pots, and pans.
-
If using the appliance to blend hot food in a saucepan, remove the saucepan from the heat source and ensure the liquid is not boiling. Allow hot food to cool slightly before blending.
-
The appliance should be kept away from any heat source.
-
Extreme caution must be used when moving an appliance or container filled with hot oil or other hot liquids.
-
Do not touch surfaces that may be hot.
-
When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage.
-
Keep hands and utensils away from the moving blending blade to prevent the possibility of severe injury to persons or damage to the appliance. A spatula may be used, but must be used only when the appliance is not running.
-
If food becomes lodged around the blending blade or in the blade guard, release the trigger switch, unplug the power cord and remove the blending shaft from the motor body. Use a spatula to dislodge the food. Do not use fingers as the blending blade is sharp.
-
Do not remove the appliance from ingredients during operation.
Ensure the trigger switch has been released and the motor has completely stopped before removing. -
Avoid contacting moving parts.
-
To turn the appliance off, release the On/Off button. Remove the plug from the power outlet.
-
Remove the plug from the power outlet if the appliance is to be left unattended, if not in use, before attempting to move the appliance, before cleaning, disassembling, assembling, and when storing the appliance.
-
Do not operate this appliance for longer than 4 minutes at a time as this can cause overheating. See the Error Code table on page 2 for more information.
-
If the blend is not processing when blending dry, thick or heavy mixtures, stop operation and stir the ingredients before continuing. Allow the motor to rest for 1 minute between each use.
-
Strictly follow the care and cleaning instructions provided in this manual.
-
DO NOT allow the blending wand to soak in water for long periods of time.
-
This appliance is for household use only. Do not use the appliance or anything other than its intended use.
-
Do not use outdoors.
-
Do not use it in moving vehicles or boats.
-
Do not leave the appliance unattended when in use.
-
This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.
-
Regularly inspect the power cord, power plug, and actual appliance for any damage. Do not operate if damaged in any way or after the appliance malfunctions. Immediately cease use of the appliance and visit Vitamix.com or call Vitamix Customer Support at 1-800-848- 2649 for examination, repair or adjustment.
-
The maximum rating is based on the food chopper attachment (sold separately and will be available in Spring 2021) that draws the greatest load (power or current) and that other recommended attachments may draw significantly less power or current.
SAVE THESE INSTRUCTIONS
PARTS AND FEATURES
1. Power Cord | 5. Motor body |
---|---|
2. On/Off Button | 6. Blending shaft (removable) |
3. Variable Speed Control button | 7. 4-pronged stainless steel blades |
4. Speed indicator lights | 8. Bell guard |
USE
-
Remove packaging materials.
WARNING| BLADES ARE EXTREMELY SHARP.
Handle with extreme care to avoid injury.
TO AVOID DAMAGE AND INJURY.
DO NOT use an immersion blender in a Vitamix Container with a blade assembly.
Use caution when blending in a glass container, pots, and pans. Remove pot/pan from the heat before blending.
NOTE: The immersion blender is not dishwasher safe.
-
Carefully wash the blending wand in warm soapy water. Rinse and dry thoroughly.
NOTE: Ensure no water remains inside the blending shaft to avoid water running into the motor body when reattached. -
Make sure the immersion blender motor is unplugged.
-
Attach the handle and wand by lining up the channels and making a one-quarter turn counter-clockwise until you hear the unit click into place.
WARNING!: Use caution when blending in a glass container, pots, and pans.
Remove pot/pan from the heat before blending. -
Place food to be processed into a sufficiently large mixing bowl, container, cup or saucepan. Note: the container should only be half full or less when blending liquids or when making a puree of fruit and/or vegetables.
WARNING! TO AVOID DAMAGE AND INJURY DO NOT use an immersion blender in a Vitamix blending container with a blade assembly. -
Plug the power cord into a power outlet.
-
Lower the blending shaft into the container with ingredients. Make sure the bell and blade assembly are completely submerged in the ingredients.
Submerge the shaft to a maximum of 2/3rd its length. Never submerge the motor body in ingredients.
NOTE: When you begin to blend, especially with hot ingredients, always start on low speed and gradually increase the speed to avoid splattering and over-processing.
Use a tall container or make small quantities to reduce spillage or splash. DO NOT use the immersion blender for more than four minutes continuously. -
To start blending, press and hold the On/Off button.
NOTE: More bars will light up and the speed will increase as the Variable Speed button is pressed. Pressing the variable speed button again when all 5-speed bars are lit shall revert to the lowest speed. Pressing and holding the variable speed button for more than one second will allow the speed to be increased continuously.
• One bar = low speed.
• Five bars = high speed. -
Slowly move the immersion blender around in the ingredients to ensure the best blend.
-
To stop, release the On/Off button. Allow the blades to come to a complete stop before removing the immersion blender from the blending container.
OVERLOAD/OVERHEAT indication: 4-speed bars will blink. Allow the immersion blender to cool down for a few minutes before using it again. Inspect the blade assembly for looseness or damage. DO NOT use an immersion blender with a damaged blade assembly. Contact Vitamix Customer Service immediately for instructions.
LOCKED ROTOR: In case the blades get jammed against a hard ingredient such as an ice cube of a frozen piece of fruit, the blender will automatically try to increase power and break free. If this does not happen, the motor will stop and all speed bars will start flashing. Follow these instructions:
1. Release the power button.
2. Remove the plug from the wall.
3. Use a spatula to carefully remove any anything stuck around the blades.
CARE
WARNING
| BLADES ARE EXTREMELY SHARP.
Handle with extreme care to avoid injury.
WARNING: TO AVOID DAMAGE AND INJURY. DO NOT IMMERSE the motor body and cord assembly in water or any other liquid.
-
Remove the blending shaft from the motor body. Wash it in warm soapy water.
Rinse and dry thoroughly. -
Wipe down the motor body with a cloth moistened with warm, soapy water. Wipe with a clean towel to remove soap residue. Wipe dry with a clean towel.
NOTE: Ensure no water remains inside the blending shaft to avoid water
running into the motor body when reattached.
NOTE: The immersion blender is not dishwasher safe.
NOTE: DO NOT allow the blending wand to soak in water for long periods of
time.
TROUBLESHOOTING
Problem:
- Machine will not run after the On/Off power switch is activated.
Solution:
- Make sure the power cord is firmly plugged into a power outlet and that the outlet has power.
- Make sure the switches are clean and moving freely.
Problem:
- Machine is running irregularly.
Solutions:
- Check the reset breaker to see if it has tripped.
Problem:
- Loose or misaligned shaft
- Vibration
Solutions:
- Make sure the Motor Body and Blending Shaft are assembled properly.
WARRANTY
3-YEAR FULL WARRANTY
-
WHAT IS COVERED.
Vita-Mix Corporation (“Vitamix”) warrants that an Immersion Blender will be free from defects in material or workmanship and will withstand wear and tear from ordinary household use for 3 years from the date of purchase. Vitamix will, within 30 days of receipt of the returned product, repair the failed Immersion Blender free of charge. If in Vitamix’s sole discretion, the failed Immersion Blender cannot be repaired, Vitamix will elect to either (A) replace the Immersion Blender free of charge or (B) refund the full purchase price to the owner, unless Vitamix receives prior written notice of the owner’s preference. -
WHAT IS NOT COVERED.
This Warranty applies only to owners for ordinary household use. This Warranty does not cover cosmetic changes that do not affect performance, such as discoloration or the effects of the use of abrasives or cleaners or food build-up. This Warranty is only valid if the Immersion Blender is used in accordance with the instructions, warnings, and safeguards contained in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized warranty repairs.
REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE ARE THE EXCLUSIVE REMEDIES OF THE PURCHASER AND THE SOLE LIABILITY OF VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR ANY MODIFICATION TO THIS WARRANTY THAT MAY BE BINDING UPON VITAMIX. ACCORDINGLY, THE PURCHASER SHOULD NOT RELY UPON ANY ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above limitations may not apply to you. Outside the U.S.A. and Canada, other warranties may apply. -
WHAT VOIDS THIS WARRANTY.
Abuse, misuse, negligent use, alteration of the Immersion Blender exposure to abnormal or extreme conditions, or failure to follow the operating instructions, will void this Warranty. The Warranty is also void if repairs to the Immersion Blender or any portion of the blade assembly are performed by someone other than Vitamix or an authorized Vitamix Service Provider. -
HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.
In the event the Immersion Blender needs service or repair, please call Vitamix Customer Service at 1.800.848.2649. You will be asked to provide a date of purchase and proof of purchase for any product that has not been registered with Vitamix. For products subject to this Warranty you will be provided with a return authorization number, up-to-date shipping instructions, and a pre-paid return pick-up label. Vitamix will pay standard shipping costs on the return of the Immersion Blender for warranty service and repair and for return shipment of the product to you after the warranty repair or replacement. Purchaser is responsible for the costs of special shipping requests.
Within the U.S.A. and Canada, this Warranty is honored directly through the Vita-Mix® Corporation.
** United States| Canada**
---|---
Vita-Mix® Corporation
8615 Usher Road
Cleveland, Ohio 44138-2199
1.800.848.2649
service@vitamix.com| Vita-Mix® Corporation
200-1701 Shepherd Street East
Windsor, Ontario N8Y 4Y5
1.800.848.2649
service@vitamix.com
You will be deemed to have accepted the returned product “as is” upon delivery unless you notify Vitamix of any problem, including shipment damage, within 48 hours of delivery.
Vita-Mix®
Corporation
8615 Usher Road
Cleveland, OH 44138 U.S.A.
vitamix.com
©2020 Vita-Mix® Corporation. No part of this publication may be reproduced or
transmitted in any form or by any means or stored in a database or retrieval
system without the written permission of the Vita-Mix® Corporation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>