VIMAR 46235.025D Speed Dome IP 4Mpx Camera Instruction Manual

: June 12, 2024
: VIMAR

Table of Contents

VIMAR 46235.025D Speed Dome IP 4Mpx Camera
Product Information
Product Usage Instructions
Package content
Introduction
Connections
Description
Install SD Card and Power Connection
Camera Installation
Network Connections
Specifications
Privacy
Documents / Resources

VIMAR 46235.025D Speed Dome IP 4Mpx Camera

VIMAR-46235025D-Speed-Dome-IP-4Mpx-Camera-product

Product Information

The HD PTZ Camera is a high-definition pan-tilt-zoom camera that comes with various features and functions. It supports video analysis functions and has a wide dynamic range (WDR), backlight compensation (BLC), defog, and 3D noise reduction (3DNR). It also has RTSP support and can be powered through PoE+ (IEEE 802.3at) or with a 12 Vdc power supply. The camera has a maximum power consumption of 22 W and is equipped with slots for a 256GB SD card. The camera weighs 2100 g.

Product Usage Instructions

Before using the product, make sure to read the instruction manual fully.
To connect the camera to the network, pull the network cable through the bracket.
Securely attach the PTZ camera to the bracket using screws.
Crimp the network cable with an RJ 45 connector.
Connect the crimped cable to the hermetic connector on the camera.
If wall mounting, ensure that the wall is strong enough to support the camera’s weight and leave a clearance of 12mm.
Use the provided drill template to mark the drilling points on the wall.
Attach the bracket to the wall using four screws.
Insert a micro SD card into the camera for storage (if required).
Connect the necessary cables, such as Ethernet and power connectors, to the camera.
Make sure the camera is powered off during installation.
Refer to the quick start guide or user manual for further instructions and troubleshooting.

Speed Dome IP 4Mpx camera (2560 × 1440), 1/2.7in CMOS sensor, 4.8~120 mm lens, mechanical IR filter, 25x optical zoom, IR illuminators with a capacity of up to 160m, 256GB SD CARD slots, video analysis functions, WDR, BLC, Defog and 3DNR, RTSP, PoE+ power supply (IEEE 802.3at) or 12 Vdc max 22 W, complete with wall bracket, IP66 protection degree. Dimensions without bracket ø 173×268 mm. Weight 2100 g.

Package content

After you receive your device, please check the following accessories. The pictures here are for reference only VIMAR-46235025D-Speed-Dome-IP-4Mpx-
Camera-fig-1

Camera
- Quick start guide
Drill template
- Screws and Plastic plug

Introduction

This Speed Dome IP camera is designed for high-performance CCTV solutions. It adopts state-of-the-art video processing chips. It utilizes the most advanced technologies, such as video encoding and decoding technology, and complies with the TCP/IP protocol, SoC (System on chip), etc to ensure this system is more stable and reliable.
Complete manuals and CVM, Iptool.exe e Diskcalculator.exe software are available to download in the Product info sheet section of www.vimar.com website.

Connections

Here below are the main connections of the camera

Network interface
HP audio output
MIC IN
Alarm input/output
Power
Grounding
Safety wire

Description

1| ALARM-GND|
---|---|---
2| ALARM-IN1|
3| ALARM-OPEN|
4| ALARM-COM|

Install SD Card and Power Connection

Install Storage Card:

Loosen the fixed screws of the rear as shown below (Fig. 1).
Insert the SD card into the storage card slot (Fig. 2).
Install back the cover back.

Camera Installation

Before start, please make sure that the wall is strong enough to withstand the weight of the camera. Please install the camera in a dry environment. The mounting steps are as follows:

Pull the cables through the bracket. Mount the speed dome to the bracket (Fig. 3).
Secure the speed dome to the bracket with the screws (Fig. 4).
Drill the screw holes on the wall according to the drill template (Fig. 5).
Drive the two screws to the holes indicated by the arrows and leave a 12mm clearance (Fig. 6).
Connect the cables and then hang the bracket on the wall and fix it (Fig. 7-8).

Network Connections

Here we take accessing IP cameras via LAN for example. In LAN, there are two ways to access.

Access through IP-Tool
Directly Access through the Web page

Access the camera through IP-Tool

Make sure that the camera and the PC are well connected to the LAN.
download the IP-Tool Product info sheet section of www.vimar.com website and then install it in the computer. After that, run the IP Tool as shown below.
Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the camera and make sure its network address is in the same local network segment as the computers. Please modify the IP address of your device according to the practical situation

For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera shall be changed to 192.168.1.X.
After modification, please input the password of the administrator and click the “Modify” button to modify the setting.
The default password of the administrator is 123456.
Double-click the IP address and then the system will pop up the Web page to connect IP-CAM.
Follow the instructions to activate the device and change the default password.

Directly Access Through the Web page

The default network settings are as shown below:
IP address: 192.168.226.201 HTTP:80
Subnet Mask: 255.255.255.0 Data Port:9008
Gateway: 192.168.226.1
Follow the instructions to activate the device and change the default password.

Specifications

46235.025D

Image

| Video compression| H265+/H265/H264+/H264/MJPEG
Bit Rate| 64Kbs ~ 8Mbs
Frame rate primario Primary frame rate| 25Fps (2560×1440)

25 Fps (1920X1080)

25 Fps (1280X720)

25 Fps (704×576)

25 Fps (480×240)

25 Fps (352×288)

Codification| VBR/CBR
Quality| Livello VBR 5, CBR illimitato – unlimited

Connections

Functions

| Functions| WDR 120dB, Defog, BLC, HLC, 3D DNR, Smart tracking
Intelligent Video Analysis| Rilevamento e riconoscimento volti (max 15 volti /sec) – Attraversamento linea, intrusione area, anomalia , conteggio veicoli/persone /

Face Detection and Recognition (max 15 faces per second) – Line Crossing, Area Intrusion, Anomaly, Vehicle/

People Count

remote control| Google Chrome, Edge, Firefox, Safari, CVM per controllo da remoto – CVM for remote control
Online users| 16 utenti / 16 users
Network protocol| UDP, IPv4, IPv6, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, HTTP, 802.1x, UPnP, HTTP, QoS, TCP/IP
Compatibility| Onvif
Storage| Archiviazione su scheda SD – SD-card storage
Day & Night| Auto / Manual /Timing
Limit Pan Tilt| 360° continuo, -10° a 90° auto Flip
Preset| 360
Cruise/Track| 8/4
Privacy mask| 4

Altro Other

| PoE| Sì / Yes
Range IR| Smart IR fino a 160m / Smart IR up to 160m
Degree IP/IK| IP66/-
Temperature range| -30° C +55°C
Power supply| 12 Vdc o PoE+(IEEE 802.3at)
Consumptions| Max 22 W
Dimensions (mm)| Ø173×268
Weight (g)| 2100
Note| multi-stream staffa inclusa / included bracket – database max 10000 volti / database max 10000 faces
Preset Description

Set random scan;

Set No. 92 Preset| Imposta limite sinistro di P-PSCAN / Set left border of P-PSCAN
Set No. 93 Preset| Imposta limite destro di P-PSCAN / Set right border of P-PSCAN

Cautions

Before the operation, we strongly advise users to read this manual and keep it properly for use later.
Please use the specified power supply to connect.
Avoid correct operation, shock vibration, and heavy pressing which can cause damage to the product.
Do not use corrosive detergent to clean the main body of the camera. If necessary, please use a soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high-grade furniture is applicable.
Avoid aiming the camera directly toward extremely bright objects, such as the sun, as this may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the reversing image will be received.
Do not operate it in case temperature, humidity, and power supply are beyond the limited stipulations.
Keep away from heat sources such as radiators, heat registers, stoves., etc.
This is product instructions, not a quality warranty. We may reserve the right of amending the typographical errors, inconsistencies with the latest version, software upgrades and product improvements, interpretation, and modification. These changes will be published in the latest version without special notification.
When this product is in use, the relevant contents of Microsoft, Apple, and Google will be involved.
The pictures and screenshots in this manual are only used to explain the usage of our product. The ownership of trademarks, logos, and other intellectual properties related to Microsoft, Apple, and Google belongs to the above-mentioned companies.

Installation rules

Installation should be carried out by qualified staff in compliance with the current regulations regarding the installation of electrical equipment in the country where the products are installed.

Conformity to Standards

EMC Directive. RoHS Directive
Standards EN 55032, EN 55035, EN 63000
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

WEEE – User information

If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one.
Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400 m2 if they measure less than 25 cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health and encourages the re-use and/or recycling of the construction materials.

Privacy

Privacy Policy

As required by Regulation (EU) 2016/679 on the protection of personal data, Vimar S.p.A. guarantees that the electronic processing of data minimizes the use of personal and other identification information, which is only processed to the extent strictly necessary in order to achieve the purposes for which it was collected.
The personal information of the Data Subject is processed in accordance with the product/application privacy policy available on our website www.vimar.com in the legal section (Product- App Privacy Policy -Vimar-energia-positiva).
Please remember that pursuant to Regulation (EU) 2016/679 on the protection of personal data, the user is the controller of processing the data collected during the use of the products and, as such, is responsible for adopting suitable security measures that protect the personal data recorded and stored, and avoid its loss.
Should the camera monitor public areas, it will be necessary to display – in a visible manner – the information about the ‘area under video surveillance’ envisaged in the privacy policy and specified on the website of the Italian Data Protection Authority (Garante). The recordings may be stored for the maximum period of time envisaged by legal and/or regulatory provisions in the place where the camera has been installed. If the regulations in force in the country of installation envisage a maximum storage period for the image recordings, the user shall ensure they are deleted in compliance with the applicable regulations.
In addition, the user must guarantee safe possession of and control over its passwords and the related access codes to its web resources. The Data Subject must provide the password for access to its system when requesting help from the Vimar Support Centre so that related support can be provided. Provision of the password represents consent for processing. Each Data Subject is responsible for changing the password for access to its system on completion of the work carried out by the Vimar Support Centre.
Viale Vicenza, 14
36063 Marostica VI – Italy
49401883A0 00 2302 www.vimar.com

Documents / Resources

| VIMAR 46235.025D Speed Dome IP 4Mpx Camera [pdf] Instruction Manual
46235.025D, 46235.025D Speed Dome IP 4Mpx Camera, Speed Dome IP 4Mpx Camera, IP 4Mpx Camera, 4Mpx Camera, Camera
---|---