steelseries Xbox Series Arctis 1 Gaming Headset Installation Guide

June 12, 2024
SteelSeries

steelseries-logo

steelseries Xbox Series Arctis 1 Gaming Headset

steelseries Xbox Series Arctis 1 Gaming Headset-
featured

Product Information

The ARCTIS 1 is a versatile headset designed for gaming and audio experiences. It features an adjustable headband, removable microphone, volume control, and ear cushions for comfort. The headset comes with a main headset cable, a dual 3.5 mm extension
cable (not included in PS4 and Xbox versions), and a retractable microphone for clear communication.

Product Overview

  • Adjustable Headband: Manually adjust the sizing by extending/retracting the left and right sides of the headphone (01).
  • Main Headset Cable: A 1.3-meter cable for connecting the headset to your device (02).
  • Dual 3.5 mm Extension Cable: A 1.5-meter cable for extended reach (03). *Not included in PS4 and Xbox versions
  • Removable Microphone: A microphone that can be detached when not in use (04).
  • Ear Cushion: Soft cushions for comfortable wearing (05).
  • Microphone Jack: Connect the microphone to the headset (06).
  • Microphone Mute Slider: Slide to mute/unmute the microphone (07).
  • Volume Control: Adjust the volume of the headset (08).

Setup

To set up the ARCTIS 1 headset, follow these steps:

  1. Adjust the headband to fit your head size by extending or retracting the left and right sides (01).
  2. Connect the main headset cable (02) to your device.
  3. If needed, use the dual 3.5 mm extension cable (03) for extended reach (not included in PS4 and Xbox versions).
  4. Position the removable microphone (04) close to the corner of your mouth with the flat surface facing you.
  5. Put on the headset and adjust the ear cushions (05) for comfort.
  6. Use the microphone mute slider (07) and volume control (08) as desired.

For further assistance, visit support.steelseries.com.

PRODUCT OVERVIEW

steelseries Xbox Series Arctis 1 Gaming Headset-fig5

  1. Adjustable Headband
  2. Main Headset Cable (1.3 m)
  3. Dual 3.5 mm Extension Cable (1.5 m)*
  4. Removable Microphone
  5. Ear Cushion
  6. Microphone Jack
  7. Microphone Mute Slider
  8. Volume Control
    *Not included in PS4 and Xbox versions

SETUP

MICROPHONE

Position the microphone close to the corner of your mouth with the flat surface facing you.

ADJUSTABLE HEADBAND

Manually adjust the sizing by extending/retracting the left and right sides of the headphone.

Europe – EU Declaration of Conformity

Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/
Operating Temperature: 0 to + 40 °C
SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping
to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals – (EC)
1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products.

WEEE

This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Statement:
This device complies with RSS standards of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.

REGIONS CONTACT INFORMATION

Asia

| 16F, NO.150, Jian-Yi Rd., Chung-Ho Dist, New Taipei City, Taiwan, R.O.C.(235)

|

+886 2 8226 3858

USA

| 656 W Randolph St, Suite 3E Chicago, IL 60661, USA|

+1 312 258 9467

Europe

| Dirch Passers Allé 27, 5.Sal 2000 Frederiksberg, Denmark|

+45 702 500 75

Product Name: Headset
Model No. : HS-00017
Rated : 3.5 mm Audio Plug
Made in China

learn more at steelseries.com

find help at support.steelseries.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals