Panasonic ER-CSF1 Multifunctional Trimmer Instruction Manual

: June 12, 2024
: Panasonic

Table of Contents

ER-CSF1 Multifunctional Trimmer
Parts identiﬁ cation (Fig. 1)
How to use
Removing and mounting the head (Fig. 2)
How to clean
Removing and mounting the outer foil and the inner blades
Replacement parts
Lubrication
Troubleshooting
Speciﬁcations
Documents / Resources

Model No. ER-CSF1 Operating Instructions

ER-CSF1 Multifunctional Trimmer

https://www.panasonic.com/multishape_support/?utm_source=productleaflet&utm_medium=qrcode&utm_campaign=multishapesupportleaflet

Panasonic ER-CSF1 Multifunctional Trimmer - Fig |
---|---

Before operating this unit, please read these instructions completely and save them for future use.
Please read the code on the cover for the detailed operating instructions.

Parts identiﬁ cation (Fig. 1)

A Head

Protective cap
System outer foil
Foil frame
System outer foil release buttons
Outer foil section
Inner blades
Foil frame release button

How to use

Clean the appliance after use.
1 Mount the head to the main body until it clicks.
2 Turn on the power.

Note

The use time after a full charge is as follows.
ER-CBL1: 50 minutes
ER-CBN1: 40 minutes
(Based on dry using at 20 °C – 30 °C)
The operating time may diﬀer depending on the frequency of use and the operating method.

Removing and mounting the head (Fig. 2)

Remove the head while pushing the head release button (a ).

Stand the head when it is removed.
Mount the head to the main body until it clicks.

How to clean

Make sure that the main body is turned oﬀ .
Lubricate after cleaning and store the head with the protective cap attached.
1 Wet the system outer foil, put on the hand soap (Fig. 3-1), turn on the power, and turn oﬀ the power after 20 seconds.
2 Remove the head and the outer foil section.
3 Rinse them with running water. (Fig. 3-2)
4 Shake up and down several times to remove the water.
5 Wipe oﬀ the water with a dry cloth and dry it well.

Removing and mounting the outer foil and the inner blades

Outer foil section (Fig. 4-1)
Remove the frame by pushing the frame release button (b ).
Align as illustrated, securely attach the outer foil section to the head until it clicks.

System outer foil (Fig. 4-2)

Do not throw away the foil frame.

Press the system outer foil release buttons (c) and pull down the system outer foil.
Align as illustrated, securely attach the system outer foil to the foil frame until it clicks.
Inner blades (Fig. 4-3)
Remove the inner blades one at a time.
Insert the inner blades one at a time.

Replacement parts

System outer foil: once every year
Inner blades: once every two years
Replacement part is available at your dealer or Service Centre.

System outer foil and inner blades	WES9013
System outer foil	WES9087
Inner blades	WES9068
Lubrication oil	WES003P

Lubrication

Apply one drop of lubrication oil to each of the system outer foils. (Fig. 5)
Turn on the power and allow to run it for approximately 5 seconds.
Turn oﬀ the power and wipe oﬀ any excess lubrication oil from the system outer foil with a soft cloth.

Troubleshooting

Problem	Action
The appliance has become blunt.	Clean the blade and apply lubrication oil.

Replace the blade.
Makes a loud sound.| Clean the blade and apply lubrication oil.
Conﬁ rm that the blade is properly attached.

If the problems still cannot be solved, contact your dealer or a service centre authorized by Panasonic for repair.

Speciﬁcations

Airborne Acoustical Noise
62 (dB (A) re 1 pW)
This product is intended for household use only

Panasonic Corporation
https://www.panasonic.com
© Panasonic Corporation 2022
Printed in Thailand
ER9210CSF13011-2
Y0422-0

Documents / Resources

| Panasonic ER-CSF1 Multifunctional Trimmer [pdf] Instruction Manual
ER-CSF1 Multifunctional Trimmer, ER-CSF1, Multifunctional Trimmer, Trimmer
---|---