vtech Shake It Bluey Instruction Manual

vtech Shake It Bluey

Product Information

The Shake It Bluey toy is a fun and interactive toy that offers five different movements with sounds. It is designed for real-life play and comes with various features and modes to keep children engaged. The toy includes a turn head, nose button, wave arm, bop body, shake shaker, light-up tummy, off/mode switch, volume switch, battery door, and a speaker. It operates on 2 AAA batteries (recommended: alkaline or fully charged Ni-MH rechargeable batteries). The toy also has an automatic shut-off feature to preserve battery life.

Included in the Package

• Shake It Bluey toy
• Packaging locks (to be removed and discarded)

Important Battery Information
Adult assembly is required for battery installation. Keep batteries out of reach of children. Dispose of batteries and the product properly according to local regulations.

Product Usage Instructions

Battery Removal and Installation

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit.
3. Use a screwdriver to loosen the screw.
4. If used batteries are present, remove them by pulling up on one end of each battery.
5. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. For best performance, use alkaline batteries or fully charged Ni-MH rechargeable batteries.
6. Replace the battery cover and tighten the screw to secure it.

WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.

Activate Normal Play Mode
The product is in Try-Me mode in the packaging. To switch to normal play mode:

1. Turn the toy ON.
2. Slide the Volume Switch from High to Low.
3. You will hear two du sounds and Bluey’s tummy will flash twice, indicating normal play mode is activated.

Product Features

1. Off/Mode Switch: Slide the switch to Free-Play mode or Follow Me mode to turn the unit On and start playing. To turn the unit Off, slide the selector to Off.
2. Turn Head: Turn Bluey’s head left and right to hear fun responses.
3. Press Nose: Press Bluey’s nose to hear her sniff and sneeze.
4. Wave Arm: Wave Bluey’s right arm to hear fun responses.
5. Shake Shaker: Shake the shaker to hear sounds and melodies.
6. Bop Body: Bop Bluey’s body to count and listen to melodies.
7. Light Up Tummy: See Bluey’s tummy light up with sounds and music.
8. Volume Switch: Adjust the volume by switching to Low/High position.
9. Automatic Shut-Off: The toy will shut off automatically after several minutes without input to preserve battery life. It can be turned on again by sliding the Off/Mode Switch. The toy will also automatically turn off when the batteries are low, indicated by Bluey’s tummy flashing three times as a reminder to change the batteries.

Activities

1. Free Play Mode: In this mode, press a button or move Bluey’s body to activate sounds, phrases, and music.
2. Follow Me Mode: In this mode, follow the directions accompanied by upbeat music to play. There are three progressive levels that allow less time for input as the level increases.

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Avoid exposing the unit to direct sunlight or direct heat sources.
3. Remove the batteries if the unit will not be used for an extended period of time.
4. Avoid dropping the unit on hard surfaces and keep it away from moisture or water.

BLUEY (word mark and character logos) are trade marks of Ludo Studio Pty Limited and are used under licence. BLUEY logo © Ludo Studio Pty Limited 2018. Licensed by BBC Studios. BBC is a trade mark of the British Broadcasting Corporation and is used under licence. BBC logo © BBC 1996

VTech understands that a child’s needs and abilities change as they grow and with that in mind we develop our toys to teach and entertain at just the right level …

vlech Baby
Toys that will stimulate their interest in different textures, sounds and colours
I am… …responding to colours, sounds and textures …understanding cause and effect … earning to touch, reach, grasp, sit-up, crawl and toddle

Pre School
Interactive toys to develop their imagination and encourage language development
Iwant. …to get ready for school by starting to learn the alphabet and counting …my learning to be as fun, easy and exciting as can be …to show my creativity with drawing and music so my whole brain develops

Glectreats Learing Computers
Cool, aspirational and inspiring computers for curriculum related learning
I need… ..challenging activities that can keep pace with my growing mind …intelligent technology that adapts to my level of learning …National Curriculum based content to support what I’m learning at school

INTRODUCTION

Thank you for purchasing the Shake It Bluey toy!
This toy has five fun movements with sounds. Let’s play a game together for real life!

INCLUDED IN THE PACKAGE

• Shake It Bluey
• Quick Start Guide

WARNING:
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE:
Please save this Instruction Manual as it contains important information.

Unlock the Packaging Locks:

1. Turn the packaging locks anticlockwise several times.
2. Pull out and discard the packaging locks.

INSTRUCTIONS

BATTERY REMOVAL AND INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw.
3. If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
4. Install 2 new ‘AAA’ (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly required for battery installation. Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Please dispose of your product and batteries responsibly.
In the UK, give this toy a second life by disposing of it at a small electricals collection point* so all of its materials can be recycled.
Learn more at:
www.vtech.co.uk/recycle
www.vtech.com.au/sustainability

• Visit www.recyclenow.com to see a list of collection points near you.

ACTIVATE NORMAL PLAY MODE
This product is in Try-Me mode in the packaging. When you play with Shake It Bluey for the first time, turn the toy on then switch the Volume Switch from High to Low. You will hear two “du” sounds and Bluey’s tummy will flash twice to indicate normal play mode.

PRODUCT FEATURES

1. Off/Mode Switch
   Slide the Off/Mode Switch to Free-Play mode or Follow Me mode to turn the unit On and start playing. To turn the unit Off, slide the selector to Off .

2. Turn Head
   Turn Bluey’s head to the left and right to hear fun responses.

3. Press Nose
   Press Bluey’s nose to hear her sniff and sneeze.

4. Wave Arm
   Wave Bluey’s right arm to hear fun responses.

5. Shake Shaker
   Shake the Shaker to hear sounds and melodies.

6. Bop Body
   Bop Bluey’s body to count and listen to melodies.

7. Light Up Tummy
   See Bluey’s tummy light up with the sounds and music.

8. Volume Switch
   Switch to Low/High volume position to adjust the volume.

9. Automatic Shut-Off
   To preserve battery life, Shake It Bluey will shut off automatically after several minutes without input. The unit can be turned on again by sliding the Off/Mode Switch. The unit will also automatically turn off when the batteries are low. Bluey’s tummy will flash three times as a reminder to change the batteries.
   NOTE
   If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

1. Free Play Mode
   In Free Play mode, press a button or move Bluey’s body to activate sounds, phrases and music.

2. Follow Me Mode
   In Follow Me mode, follow the directions with upbeat music to play. Three progressive levels allow less time for input as the level increases.

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries if the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the unit still does not work, install a new set of batteries.

If the problem persists, please contact our Consumer Services Department and a service representative will be happy to help you.

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.

UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support

Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au

NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

PRODUCT WARRANTY/ CONSUMER GUARANTEES

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.

Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au

TM & © 2023 VTech Holdings Limited. All rights reserved.
IM-560203-001
Version:0

References

• Support : VTech Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>