dji Matrice 30 T Drone Camera User Guide
- June 12, 2024
- DJi
Table of Contents
dji Matrice 30 T Drone Camera
Product Information
| Dock Version | v1.0 |
|---|---|
| User Guide | Available |
| Introduction | DJI™ MATRICE™ 30T Dock Version aircraft can be linked to DJI |
Dock. With DJI FlightHub 2, it can be used to perform automated
operations remotely.
In the Box| CW * The aircraft comes with a microSD Card inserted.
CCW
Specifications| Operating Temperature
Video Transmission System
Operating Frequency
Transmitter Power (EIRP)
Max Transmission Distance
Power Supply
Compatible Battery Model
Product Usage Instructions
- Preparing the Aircraft:
- Unfold the frame arms on both sides in the same way. Make sure the frame arm folding buttons pop out to ensure that the frame arms are locked firmly.
- Make sure the gimbal camera is facing forward.
- Insert two TB30 batteries (not included). Make sure the batteryrelease toggles are in the same position as shown in the diagram.
- Press and then press and hold the power button to power on/off the aircraft. The power indicator glows solid green after the aircraft is powered on.
- Linking to the Dock:
- Open the dock electrical cabinet door, then use the USB-C cable included in the Dock Bundle to connect the USB-C port of the remote controller to the USB-A port of the dock electrical cabinet.
- Power on the remote controller, run DJI Pilot 2, and follow the prompts to complete the activation for the aircraft.
- Dock Onsite Debugging in DJI Pilot 2 provides the aircraft status and operations such as aircraft charging.
- Usage: Scan the QR code or go to the address to watch the tutorial videos and read the related manuals such as the Safety Guidelines, User Manual, and Installation and Setup Manual. Make sure to understand the safety precautions and learn more aircraft information.
- Tutorial Videos: https://www.dji.com/dock/video
- Downloads: https://www.dji.com/dock/downloads
Disclaimer and Warning:
By using this product, you signify that you have read, understand, and accept the terms and conditions of this guideline and all instructions at www.dji.com/dock.
EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE ATHTTPS://WWW.DJI.COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS AND CONTENT AVAILABLE THROUGH THE PRODUCT ARE PROVIDED AS IS AND ON AS AVAILABLE BASIS WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for children.
Introduction
DJITM MATRICETM 30T Dock Version aircraft can be linked to DJI Dock. With DJI FlightHub 2, it can be used to perform automated operations remotely.
In the Box
- The aircraft comes with a microSD Card inserted.
Preparing the Aircraft
- Make sure the propellers are securely mounted and not damaged or deformed and that there are no foreign objects in or on the motors or propellers.
- Make sure the lenses of the vision systems, gimbal cameras, FPV camera, glass of infrared sensors, and auxiliary lights are clean and not blocked in any way, and that the protective stickers are removed.
- Make sure the waterproof rubber port covers are correctly in place and securely sealed.
- Unfold the frame arms on both sides in the same way. Make sure the frame arm folding buttons pop out to ensure that the frame arms are locked firmly.
- Make sure the gimbal camera is facing forward.
- Insert two TB30 batteries (not included). Make sure the battery release toggles are in the same position as shown in the diagram.
- Press and then press and hold the power button to power on/off the aircraft. The power indicator glows solid green after the aircraft is powered on.
- Push the battery release toggles outward to remove TB30 batteries.
- Make sure to push and hold the frame arm folding button and fold the arms in before transporting the aircraft separately.
- When transporting the unpacked dock, make sure to remove the aircraft from the dock for separate transportation.
Linking to the Dock
- The aircraft and the dock require activation before first time use. An internet connection is required for the remote controller during activation.
- Make sure to keep a safe distance from the dock cover when opening using DJI Pilot 2 in order to avoid injury. Press any of the emergency stop buttons on the dock to stop the dock covers from opening, if necessary.
- It is recommended to close the dock cover in the app or FlightHub 2 when the aircraft is placed in the dock. Make sure to move the two blades of each motor to be at 90° with each other in order to avoid breaking the propellers when manually closing the dock cover.
- Open the dock electrical cabinet door, then use the USB-C cable included in the Dock Bundle to connect the USB-C port of the remote controller to the USB-A port of the dock electrical cabinet.
- Power on the remote controller, run DJI Pilot 2, and follow the prompts to complete the activation for the aircraft.
- Make sure the driving rods on the landing pad are pulled back, the aircraft heading is consistent with the icon on the landing pad, and that the aircraft is placed properly on the landing pad. Make sure to move the two blades of each motor to be at 90° with each other and to close the dock cover in the app to complete the configuration.
- Dock Onsite Debugging in DJI Pilot 2 provides the aircraft status and operations such as aircraft charging.
Usage
Scan the QR code or go to the address to watch the tutorial videos and read the related manuals such as the Safety Guidelines, User Manual, and Installation and Setup Manual. Make sure to understand the safety precautions and learn more aircraft information.
https://www.dji.com/dock/video
https://www.dji.com/dock/downloads
Disclaimer and Warning
By using this product, you signify that you have read, understand, and accept
the terms and conditions of this guideline and all instructions at
www.dji.com/dock.
EXCEPT AS EXPRESSLY PROVIDED IN AFTER-SALES SERVICE POLICIES AVAILABLE AT
http://WWW.DJI.COM/SERVICE/POLICY, THE PRODUCT AND ALL MATERIALS AND CONTENT
AVAILABLE THROUGH THE PRODUCT ARE PROVIDED “AS IS” AND ON “AS AVAILABLE BASIS”
WITHOUT WARRANTY OR CONDITION OF ANY KIND. This product is not intended for
children.
Specifications
- Operating Temperature -20° to 50° C (-4° to 122° F)
- Video Transmission System O3 Enterprise
- Operating Frequency 2.4000-2.4835 GHz, 5.725-5.850 GHz
- Transmitter Power (EIRP) 2.4 GHz: <33 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC), <30 dBm (SRRC), <14 dBm (CE)
- Max Transmission Distance 15 km (FCC), 8 km (CE/SRRC/MIC)
- Power Supply Using external battery
- Compatible Battery Model TB30 Intelligent Flight Battery
Compliance Information
FCC STATEMENT
FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: Matrice 30T
Model Number: M30T RTK
Responsible Party: DJI Research LLC
Responsible Party Address: 435 Portage Ave, Palo Alto, CA 94306
Website: www.dji.com
We, DJI Research LLC, being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
The aircraft complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, human proximity to the antenna shall not
be less than 20cm during normal operation. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1)This device
may not cause interference.(2)This device must accept any interference,
including interference that may cause undesired operation of the device.
This equipment complies with RSS-102 radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
EU & UK Compliance Notice
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that
this device (Matrice 30T) is in compliance with the essential requirements and
other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at
www.dji.com/eurocompliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that
this device (Matrice 30T) is in compliance with the essential requirements and
other relevant provisions of Radio Equipment Regulations 2017.
A copy of the GB Declaration of Conformity is available online at
www.dji.com/eurocompliance
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual
waste, but have to be disposed of separately. The disposal at the communal
collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to
similar collection points. With this little personal effort, you contribute to
recycle valuable raw materials and the treatment of toxic substances.
https://www.dji.com/dock/downloads
If you have any questions about this document, contact DJI by sending a
message to DocSupport@dji.com.
DJI and MATRICE are trademarks of DJI.
Copyright © 2023 DJI All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>