ProDemand 94J32127 Power Recliner Motor and Cable Instructions
- June 12, 2024
- PRODEMAND
Table of Contents
Jul 25, 2023
License:
Odometer:
YMMS: 1994 Chrysler LeBaron GTC
Engine: 3.0L Eng
VIN: 1C3EU4532RF259561
POWER RECLINER MOTOR & CABLE
Removal & Installation
1. Remove seat assembly. See SEAT ASSEMBLY . Remove outboard side shields to expose recliner and cable. See Fig 2 . Remove cable housing clip from cushion frame. Remove cable housing clamp from recliner transmission housing and remove drive cable.
2. Lay seat on its back on a clean surface. Remove 4 bolts attaching power seat track to cushion frame. Remove 2 motor attachment screws from power seat track cross strap. Disconnect recliner motor connectors. Remove recliner motor and cable assembly. For installation, reverse removal procedure. Ensure cable is equipped with a cable housing clip and clamp.
Fig 2: Exploded View Of Power Recliner Seat
94J32127
- Recliner
- Recliner Trim
- Seat Switch Assembly
- Memory Seat Control Module
- Power Recliner Motor
- Power Seat Adjuster
- Power Seat Motors
Courtesy of CHRYSLER CORP.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>