Soundcore A39910F1 Life P2i True Wireless Earbuds User Guide
- June 6, 2024
- Soundcore
Table of Contents
Soundcore A39910F1 Life P2i True Wireless Earbuds
SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
WEARING
Choose the EarTips that fit your ears best.
CHARGING
Fully dry off the USB charging port before charging. Use a certified USB-C charging cable to prevent any damage.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off, place the earbuds in the charging case and close it.
PAIRING
Open the charging case, the earbuds will automatically enter Bluetooth pairing mode. Select “Soundcore Life P2i” on your device’s Bluetooth list to connect.
CONTROLS
- x1: Press once
- x2: Press twice
- x3: Press three times
- 2s: Press and hold for 2 seconds.
- x1: Press once
- x2: Press twice
- x3: Press three times
- 2s: Press and hold for 2 seconds
RESET
Reset if the earbuds cannot properly pair with each other or with other devices. Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times . This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
- Steady white
- Steady red
- Flashing white
- Flashing red
- Light off
TIPS
Bluetooth Pairing:
For some smartphones, you may be requested to re-confirm the pairing on a pop-
up window after you have selected “Soundcore Life P2i” to pair. Breaking
Bluetooth Connection: Turn off your Bluetooth device and turn it on again.
Remove “Soundcore Life P2i” from your device’s Bluetooth list. Reset: If you
try to reset the earbuds, make sure that the earbuds are being charged in the
case and leave the case open.
service@soundcore.com /support.mea@soundcore.com (For Middle East and Africa Only) support@anker.com
Input: 5V 0.5A Charging time: 2 hours Playtime (varies by volume level and contents): 8 hours (Total 28 hours with the charging case) Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party (contract for EU and UK matters) ANKER TECHNOLOGY (UK) LTD Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany