KRUX KRX0068 Lunar 3×120 ARGB Kit Instruction Manual
- June 4, 2024
- KRUX
Table of Contents
KRX0068 Lunar 3×120 ARGB Kit
Instruction Manual
SETLFP ARGE CONTROLLERR
SETLFP TO MOTHERBOARD
WARNING:
5VDC ADDRESSABLE RGE PRODUCTS WILL BE COMPLETELY DJAMAGEL WHEN LSEE IN 1EULJC
RGB PLUG.
X -3-PIN ARGE CONTROLLER
M key single click to swish modes.
S key single click to switch to the next speed level 6 speed levels].
S key 3 seconds long press to turn on/off the light.
C key single click to switch color.
C key 6 seconds long press to adjust brightness level [6 brightness
levels].
X- RGB REMOTE CONTROLLER
-
Click to lock the current mode, and save it as default.
Press and hold for S seconds within 30 seconds of power-on to match/unmatch the remote control and controller. -
Click to turn on/off lights.
-
Set the number of light beads by clicking: 33 light beads by default, and reduce 3 light beads by clicking each time, decreasing the cycle.
-
Click to reduce the speed of the lights. Click to increase the speed of the lights.
E. Single click: /Automatically cyclically demonstrate all modes, the duration of each mode is 10 seconds. -
Click to change to the next light color.
-
Click and press for 2 seconds: change to next light effect.
-
Click to change to the previous light color.
-
Click and press for 2 seconds: change to the previous light effect.
-
Single color: white.
-
Decrease the brightness of the light.
-
Enhance the brightness of the light.
-
Single color: green.
-
Single color: red.
-
Single color: blue.
2-year manufacturer warranty
Use and warranty limitations
- The product should be used according to its intended purpose. Incorrect use can damage the product and endanger the life of the user;
- Excessive humidity, dust, and other contaminations can result in product damage which is not covered by the warranty;
- The warranty does not cover mechanical damage to the product;
- Avoid exposure to rapid changes in ambient Should they occur, wait approx. 3D minutes before using the product until the temperature is leveled;
- You can find the Warranty Terms and Conditions in “Support” at https://krux.tech/
ENTITY RESPONSIBLE / POOMIOT 00POWIEOZIALNY: COOLING SP Z D.D.