ADAInstruments WHEEL 50 DIGITAL Measuring Wheel User Manual

WHEEL 50 DIGITAL Measuring Wheel

Specifications

• Max Measuring Range:
• Accuracy:
• Resolution:
• Power Supply:
• Operating Temperature:
• Diameter of the Wheel:

Product Information

The WHEEL 50 DIGITAL measuring wheel by ADAINSTRUMENTS is a versatile and user-friendly instrument designed for accurate measurements. It features touch buttons for easy operation, an adjustable handle, and a rubber-covered wheel to prevent slipping for precise measurements.

Product Usage Instructions

Appearance:

• Buttons
• Battery compartment
• LCD
• Handle
• Handle lock
• Spring
• Measuring wheel
• Stand

Buttons and Display:
The buttons on the device allow you to perform various functions:

• Shift between metric/inch
• Memory recall
• LCD
• ON/OFF
• Clear
• Store data

The display shows important indicators such as low battery, memory status, metric/inch selection, and displayed data.

Functions
The WHEEL 50 DIGITAL offers multiple functionalities to enhance your measuring experience.

Warranty Information
The warranty coverage does not extend to specific cases. For more details, visit the ADAINSTRUMENTS website or contact them via email at info@adainstruments.com.

INTRODUCTION

Thank you for your choice of our products. This instrument is easy to use, accurate, and reliable.
You can shift between metric and inch systems, and store data. The measuring wheel has touch buttons, and an adjustable handle. The wheel is covered with rubber to avoid slipping which ensures accuracy of measurement.

APPEARANCE

BUTTONS AND DISPLAY

Buttons

1. Shift between metric/inch
2. Memory recall
3. LCD display
4. ON/OFF
5. Clear
6. Store data

Display

• Low battery indicator
• Memory indicator
• Metric
• Inch
• Display data

FUNCTIONS

1. ON/OF — Switch
2. М/ft – shift between metrical and imperial size. When one system is selected, the relevant sign is displayed on the right side of the display. M means metric, and ft means imperial.
3. SM – memory. Push this button to store measured data. It will show M1, 2, 3 …….respectively.
4. RM- recall data. When the data is stored you can read the memory from M1 to M5. E.g. if you store 5M in M1, and 10M in M2, while the current measured data is 120.7M. When you press the RM button once, it will show the data of M1 and also the “R” sign at the right corner. A few seconds later the display will be back to show the current measured data again. If you press the RM button twice, it shows the stored data of M2. The “R” sign is at the right corner. In several seconds the display will be back to show the current measured data again.
5. CLR – clear the current measured data. Press this button twice to clear the current measured data.

TECHNICAL DATA

WARRANTY

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for two (2) years from the date of purchase.
During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at the manufacturer’s option), without charge for either part of labor.
In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product if it has been misused, abused, or altered. Without limiting the foregoing, leakage of the battery, and bending or dropping the unit are presumed to be defects resulting from misuse or abuse.

EXCEPTIONS FROM RESPONSIBILITY

• The user of this product is expected to follow the instructions given in the operators’ manual.
• Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance.
• The manufacturer, or its representatives, assumes no responsibility for the results of faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits.
• The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood …), fire, accident, or an act of a third party and/or usage in other than usual conditions. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data interruption of business, etc., caused by using the product or an unusable product.
• The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other than explained in the users’ manual.
• The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

WARRANTY DOESN’T EXTEND TO FOLLOWING CASES:

1. If the standard or serial product number will be changed, erased, removed, or wil be unreadable.
2. Periodic maintenance, repair, or changing parts as a result of their normal runout.
3. All adaptations and modifications with the purpose of improvement and expansion of the normal sphere of product application, mentioned in the service instruction, without the tentative written agreement of the expert provider.
4. Service by anyone other than an authorized service center.
5. Damage to products or parts caused by misuse, including, without limitation, misapplication or negligence of the terms of service instruction.
6. Power supply units, chargers, accessories, and wearing parts.
7. Products, damaged from mishandling, faulty adjustment, maintenance with low-quality and non-standard materials, presence of any liquids and foreign objects inside the product.
8. Acts of God and/or actions of third persons.
9. In case of unwarranted repair till the end of the warranty period because of damages during the operation of the product, its transportation, and storing, the warranty doesn’t resume.

For more information, you can visit our website: WWW.ADAINSTRUMENTS.COM
or write a letter with your questions to: info@adainstruments.com

WARRANTY CARD

• Name and model of the product__
• Serial number___
• date of sale___
• Name of commercial organization _____stamp of commercial organization

The warranty period for the instrument exploitation is 24 months after the date of original retail purchase. During this warranty period, the owner of the product has the right to free repair of his instrument in case of manufacturing defects. Warranty is valid only with the original warranty card, fully and filled (stamp or mark of the seller is obligatory). Technical examination of instruments for fault identification which is under the warranty, is made only in the authorized service center. In no event shall the manufacturer be liable before the client for direct or consequential damages, loss of profit, or any other damage that occurs as a result of the instrument o? tage.

The product is received in the state of operability, without any visible damages, in full completeness. It is tested in my presence. I have no complaints about the product quality. I am familiar with the conditions of warranty service and I agree.

• Purchaser signature ____

Before operating you should read service instructions!
If you have any questions about the warranty service and technical support contact the seller of this product

Certificate of acceptance and sale

FAQ

• Q: How do I switch between metric and inch systems?
  • A: To switch between metric and inch systems, use the dedicated button on the device.
• Q: What should I do if the memory is full?
  • A: If the memory is full, you can clear it using the Clear button to make space for new data.
• Q: How do I store data using the measuring wheel?
  • A: To store data, use the Store Data button after taking a measurement. The data will be saved for future reference.

References

• ADA Instruments

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>