Pool TECHNOLOGIE OPT23PER05 Automatic Dosage Plus pH Regulator Plus ORP Control Instructions
- June 12, 2024
- Pool Technologie
Table of Contents
Pool TECHNOLOGIE OPT23PER05 Automatic Dosage Plus pH Regulator Plus ORP
Control
Product Information
- The product is an automatic dosage system that includes a pH regulator and ORP control. It offers several benefits, including proportional pH and chlorine injections based on set points and probe measurements. The system is panel-mounted and ready to install, with easy commissioning. It comes with a choice of pumps, offering different technologies and flow rates. The pH probes are of high quality and factory tested and calibrated. The system helps limit the risk of over-chlorination and protects equipment. It also features an intuitive navigation system on a wide-angle screen.
- The product’s features include automatic chlorine dosage by ORP probe, proportional pH regulation in acid or basic mode, injection cycle settings, ORP and pH setpoint ranges, high/low alarm thresholds, event logging, multilingual communication interface, alarm messages indicating the origin of malfunctions, and safety and information notifications for ORP and pH values, setpoints not reached, setpoint range overruns, and empty Cl and pH cans.
- Technical specifications include an IPS HD panel screen, liquid chlorine disinfectant dosage, intelligent injection by ORP control, proportional chlorine regulation, ORP setpoint adjustment from 200 to 900 mV, gold ORP probe, pH regulation in a setpoint range of 6.8 to 7.6, pH probe calibration at pH 7 and pH 10, blue pH probe, and box dimensions of W 140 x H 300 x D 97 mm.
- The product also comes with a peristaltic pump or electromagnetic pump or electromechanical pump, depending on the desired flow rate. The flow rates range from 0.5 L/h to 115 L/h for different pump references.
Product Usage Instructions
Installation:
- Mount the panel-mounted electronic box and pH/ORP measuring chamber.
- Connect the ORP measuring chamber using the provided connection kit.
- Install the ORP Gold probe and calibrate it using the ORP calibration solution.
- Install the pH Blue probe and calibrate it using the pH 7 and pH 10 calibration solutions.
- Attach the pH and Cl injection fittings.
- Connect the measuring chamber flow sensor.
- Attach the suction pipes with empty pH and Cl can sensors.
- Connect the power cable (2 m).
Operation:
- Set the desired ORP and pH setpoints on the panel.
- Select the appropriate mode for pH regulation (acid or basic).
- Adjust the injection cycle settings as needed.
- Monitor the ORP and pH values on the screen.
- Ensure that the pH and Cl cans are not empty to prevent interruptions in dosage.
Maintenance:
- Regularly check and clean the probes to maintain accurate measurements.
- Refill the pH and Cl cans when necessary.
Troubleshooting:
- If there is a malfunction, refer to the alarm messages displayed on the screen for information on the origin of the issue.
- If high or low ORP and pH values are detected, check the probes and calibration.
- If the ORP and pH setpoints are not reached, adjust the setpoints accordingly.
- If the ORP and pH setpoint ranges are overrun, adjust the ranges to appropriate values.
Note: The product comes with a 2-year warranty for the box and 1-year warranties for the ORP Gold probe and pH Blue probe.
BENEFITS
pH and chlorine injections proportional to the difference
- between the set points and the probe’s measurements
Panel mounted system
- ready to install, easy to commission
Choice of pumps according to your needs
- 3 different technologies from 0.5 l/h to 115 l/h
High-quality pH Blue and ORP Gold probes
- factory tested and calibrated
Limits the risk of over-chlorination and
- protects equipment (cover, liner, etc.)
Intuitive navigation
- on a wide-angle screen
Connectivity
- e-Pool® app and connected pool compatible
FEATURES
- Automatic chlorine dosage by ORP probe
- Proportional pH regulation in acid (pH-) or basic (pH+) mode
- Injection cycle settings, ORP and pH setpoints ranges, high/low alarm thresholds Log of events
- Multilingual communication interface
- Alarm messages: origin of the malfunction indicated by a written message
- Safeties and information: high and low ORP and pH values, ORP and pH setpoints not reached, ORP and pH setpoints ranges overrun, Cl and pH cans empty
TECHNICAL SPECIFICATIONS
- Screen: IPS HD panel
- Disinfectant dosage: liquid chlorine
- Intelligent injection: by ORP control
- Type of chlorine regulation : proportional
- ORP setpoint adjustment: 200 to 900 mV
- ORP probe: Gold
- Correction product: pH- or pH+
- Type of pH regulation : proportional
- pH set point adjustment : 6.8 to 7.6
- pH probe calibration: 2 points pH 7 and pH 10
- pH probe: Blue
- Box dimensions: W 140 x H 300 x D 97 mm
- Panel dimensions: W 545 x H 450 x D 110 mm
- pH Blue probe
- MESU003003-PDC
- ORP Gold probe
- MESU003206-PDC
- Pre-filter with cartridge
- washable polyester 50 μm
- Integrated flow sensor
- to guarantee ORP and pH values
PERISTALTIC PUMP
- Flow (L/h) Reference
- 0, 5 OPT23PER05
- 6 OPT23PER6
- 12 OPT23PER12
- 20 OPT23PER20
ELECTROMAGNETIC PUMP
- Flow (L/h) Reference
- 5 OPT23MAG5
- 10 OPT23MAG10
- 22 OPT23MAG22
ELECTROMECHANICAL PUMP
Flow (L/h) Reference
- 50 OPT23MAG50
- 115 OPT23MAG115
PRINCIPLE DIAGRAM
CONTENT
- Panel-mounted electronic box and pH/ORP measuring chamber
- ORP measuring chamber connection kit
- ORP Gold probe
- ORP calibration solution 475 mV
- pH Blue Probe
- pH 7 & pH 10 calibration solutions
- pH and Cl injection fitting
- Measuring chamber flow sensor
- Suction pipe with empty pH can sensor
- Suction pipe with empty Cl can sensor
- Power cable (2 m)
- User manual
WARRANTIES
- Box: 2 years
- ORP Gold probe: 1 year
- pH Blue probe: 1 year
REFERENCE
- DOOP23POOC-G5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>