Pool TECHNOLOGIE ORP Controller + pH Regulator Owner’s Manual

Pool TECHNOLOGIE ORP Controller + pH Regulator

Product Information

The Production ORP controller + pH regulator is designed for use with a saltwater chlorinator and is capable of regulating the pH of a pool up to 160m3 in volume. The model, Just Regul, has a pump flow rate of 1.8l/h and the reference number is COOP20NPSA-G2. The device features a 2-line LCD display and has smart pH- or pH+ correction capabilities. The pH setpoint can be adjusted between 6.8 and 7.6 and the device has 2-point pH calibration at pH 7 and pH 10. The ORP setpoint can be adjusted between 200 and 900 mV and the ORP probe has a calibration point of 475 mV. The control panel size is W 140 x H 300 x D 97 mm.

Product Usage Instructions

• Before installation, refer to the installation diagram provided in the manual. The device should be installed in-line with the pool’s circulation system. The pH probe should be installed after the pool heater and before any chemical treatment systems, while the ORP probe should be installed after any chemical treatment systems.
• When using the device, first ensure that it is correctly calibrated by calibrating the pH probe at pH 7 and pH 10 and the ORP probe at 475 mV. Once calibrated, set the desired pH setpoint between 6.8 and 7.6 using the control panel. The device will then automatically adjust the amount of acid or base added to the pool to maintain the desired pH level.
• The device also has ORP control capabilities, which can be used to maintain a specific ORP setpoint between 200 and 900 mV. This feature is optional and can be turned off if not required. When using ORP control, the device will automatically adjust the amount of chlorine generated by the saltwater chlorinator to maintain the desired ORP level.
• The device comes with a 2-year warranty for the box and a 2-year warranty for the pH probe (blue) and a 1-year warranty for the ORP probe (gold).

CONTENT

• Control box
• ORP Gold probe
• ORP calibration solution 475 mV
• pH Blue probe
• Calibration solutions pH 7 & pH 10
• Probe holder, injection connector
• Accessories holder with plugs
• Salt/temperature sensor
• Saddle clamp (Ø 50 mm)
• Power cable (2 m)
• Reducer Ø 63/50 mm x2
• Wall support (with screws)
• User manual

OPTION

• Measure chamber for ORP probe with connection kit

BENEFITS

• Intuitive navigation on backlit LCD display
• In line or dashboard display
• Soft touch keyboard with quick access keys
• Permanent display of ORP and pH values
• High quality ORP and pH probes, factory tested and calibrated
• Integrated silent dosing pump
• Suitable for all type of saltwater chlorinators
• Bluetooth remote control with e-Pool® app
• Compatible with new European regulation (N°2019/1148) pH correcting agent adjustable concentration
• Transparent accessories holder

FEATURES

• Control and optimization of chlorine production thanks to ORP probe, specifically designed
• Smart and proportional pH regulation according to the pool volume in acid (pH-) or base (pH+) mode
• Limitations of chlorination issues and protection of pool equipments (cover, liners, etc…)
• Water temperature and salt level display
• Multilingual communication interface
• Multilingual alarm message: written message display of malfunction cause
• Safeties: high and low ORP values, unreached setpoint, pH setpoint overrun and overfeeding
• Adjustable ORP and pH setpoints
• Easy installation and assembly

Technical specifications

• Display: LCD 2 lines
• Corrective solution: pH- or pH+
• Type of pH regulation: smart
• pH setpoint adjustment: 6,8 to 7,6
• pH probe calibration: 2 points pH 7 & pH 10
• pH probe: Blue
• ORP setpoint adjustment (mV): 200 to 900
• ORP probe calibration: 1 point 475 mV
• ORP probe: ORP Gold
• Control panel size (mm): W 140 x H 300 x D 97

INSTALLATION DIAGRAM

WARRANTIES

• 2 YEAR: Box
• 2 YEAR: Probe pH Blue
• 1 YEAR: Probe ORP Gold

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>