NEXIGO S03 Battery Pack User Manual

: June 12, 2024
: NEXIGO

Table of Contents

Thank You!
WELCOME TO THE NEXIGO FAMILY!
PRODUCT INTRODUCTION
PRODUCT DIAGRAM
WHAT’S IN THE BOX?
SPECIFICATIONS
HOW TO USE THE BATTERY PACK
IMPORTANT NOTES
FCC REQUIREMENT
CONTACT INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEXIGO S03 Battery Pack

NEXIGO S03 Battery Pack

Thank You!

for Choosing NexiGo!

WELCOME TO THE NEXIGO FAMILY!

Thank you for choosing the NexiGo S03 Battery Pack! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com anytime for further assistance. Make sure to register your purchase at nexigo.com/warranty within 14 days of the delivery date to extend your warranty coverage to TWO Years! From all of us here at NexiGo, we want to thank you for your trust in us. We look forward to serving you again in the near future.

Yours Sincerely,
The NexiGo Team

PRODUCT INTRODUCTION

The NexiGo S03 Battery Pack is specially designed to extend the battery life of the Oculus Quest 2 Headset, allowing you to play for much longer than before. Its multiple charging protection functions prevent damage to your headset. It plugs into both the Type-C port and 3.5mm audio jack for greater stability, and the audio pass-through ensures the battery pack does not impede your use of headphones. Four battery level indicators let you know the remaining battery level at a glance.

PRODUCT DIAGRAM

Product Diagram

3.5mm Audio Interface
Type-C Interface
Protective Cover
3.5mm Audio Jack
Type-C Input Port
Power Button
Battery Indicators (LED 1 to LED 4)

WHAT’S IN THE BOX?

1 x 3400mAh Battery Pack
1 x Power Cable
1 x User Manual

SPECIFICATIONS

Battery Capacity	3400mAh
Related Input	5V ≡ 2A
Related Output	5V ≡ 1.5A
Operating Temperature	23°F – 113°F (-5°C – 45°C)
Storage Temperature	14°F – 140°F (-10°C – 60°C)

HOW TO USE THE BATTERY PACK

POWER ON/OFF

Press the power button once to power on the battery pack, and the battery indicators will light up.
If it is not charging a device, the power bank will automatically shut down after 60 seconds.
Double-click the power button to turn off the battery pack.

CHARGE THE BATTERY PACK

Please ensure that the battery pack is fully charged before using it for the first time. Charge the battery pack by connecting it to a power source (wall charger, computer, etc.) with a DC 5V 2A output using the provided USB charging cable. The LED indicators will begin flashing in a breathing pattern to indicate the charging status, and when all LED indicators are lit and are not flashing it means the battery pack has been fully charged.

How To Use The Battery Pack

LOW BATTERY ALERT

The battery indicator LED 1 will flash white when the battery is below 3%. Please charge the battery pack by connecting it to a power source (wall charger, computer, etc.) with a DC 5V ≡ 2A output using the provided USB charging cable.

CHARGE THE QUEST 2 HEADSET WITH THE BATTERY PACK

Match and plug in the Type-C and 3.5mm audio interfaces of the battery pack to the Oculus Quest 2 Headset. The battery pack will automatically wake up and power on. The four LEDs indicate that the headset is being charged.

Note: If the battery pack fails to wake up automatically, you can press the power button to turn it on.

How To Use The Battery Pack

IMPORTANT NOTES

Please only use the included USB cable with the battery pack. Use of other charging cables may cause damage to the power bank or your devices.
Ensure that the power bank is not stored or used in overly hot or cold temperatures. Prolonged exposure to heat or cold will adversely affect battery performance and longevity.
Avoid exposure to water.
Avoid dropping, throwing, or excessively vibrating the product, as this may damage its internal components.
Keep out of reach of children.
The power bank may be slightly warm after charging.
This is normal.
Avoid contact with metal objects, as this may cause a short circuit.
Do not attempt to repair, disassemble, or modify the power bank under any circumstance. If the power bank malfunctions, contact NexiGo support at cs@nexigo.com.
Please turn the charger off before boarding an airplane and keep it off for the duration of your flight.

FCC REQUIREMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.