JBL Celebrity 100 Automotive Head Unit User Guide

Celebrity 100 Automotive Head Unit
User Guide JBL Celeby 100
Automotive Head Unit
User Guide

Celebrity 100 Automotive Head Unit

Before you start
Congratulations on your purchase of the JBL Celebrity 100 in-car head unit! For correct installation and connection, as well as the correct use of functions during operation, we recommend that you read this manual first. Save it, it will be useful to you in the future.
The JBL Celebrity 100 head unit has a standard installation size of 1DIN and contains:

• FM tuner,
• Player for audio files from USB flash drives,
• Player for audio files from SD memory cards,
• Bluetooth module that allows the head unit to work in hands free mode and play music from the connected device through the car audio system (BT Audio mode)
• AUX input for connecting any audio sources with headphone output (players, smartphones, tablets, etc.)

Installation and connection of the head unit

Choosing a place to install

• The head unit is intended for use inside the car.
• To mount it, choose a regular place in the panel, provided by the car manufacturer.
• If the dimension of footprint is not in 1-DIN format, select a suitable adapter frame to accommodate a standard 1-DIN footprint.
• If the design of the panel does not provide for a regular place for the installation of the head unit, choose the mounting location where the unit will not interfere with the normal driving function of the driver.
• Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, form the heater, or where it would be subject to dust, dirt, or excessive vibration.

Choosing an installation method

• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a sudden stop. Like an emergency stop.
• To avoid short circuits, disconnect the battery from the vehicle electrical system (if possible). After making connections, connect the positive terminal of the battery first, then the negative one.
• Before final assembly of the unit, make sure all connections are correct and the system is working properly.

IMPORTAN T SAFETY INSTRUCTIONS

For all products:

1. Read these nstructons.
2. Keep theselnstructions
3. Heedallwamings.
4. Followallinstructions.
5. Ceanonlywitha dry lth.
6. Do not blockany ventilation openings. stall his apparatus iaccordance vith the manufactuers nstructions.
7. Do notinstall this appratus near any heat sources suchasradiators, heatregisers,stovesor ather apparatus including amplifers) that produce heat.
8. Donot defeat the safety purposeofthe polarizedor grounding- type:  plug. A polrized plug is two blades with one wider than theother. A grounding-type plug has two blades and athird grounding prong. The wide blade orthe third prong is provided foryoursafety. the provided plug does notfitnto youroule,consutan electrcan for eplacement ofthe obsolete oulet.
9. Protectthe power ordfrom being walked on or pinched, particlary atplugs, convenience receptaces and the point where they exit from the apparatus.
10. Use only attachments/accessories specifed by the manufacturer.
11. **** Use only with the cart,stan, ipod, bracket or tablespecifed by the manufactuer orsold with  theapparatus. Whena cart i used, use caution when moving the cat/apparatus combination to avod injury from tp-over.
12. Unplugthis apparatus during lightaing torms or when unused forlong eriods o time.
13. Referallsenvicng to qualifiedsevice personnel. Servcing s required when the apparatus has been damaged in any way such is when the povier-supply cord or lug is damaged iquid as been il orobjects have fallennto the apparatu, to the apparatus has been xposed to 1ainor moisture, does not oerate nomally o has been dropped.
14. Todisconnect this apparatus from the AC mains completely disconnect the poier-supply ord plug from the ACreceptacle.
15. Themains plug of the powersupply cordshall remain reacilyoperabl.
16. This apparatussintended to be used only withthe power supply and/or charging cable provided by the manufacure.

The following instructions may not aply to waterproof devices. Refer toyour device user manualor quick start uide for mare waterproof instruction fany.

• Do not usethis apparatus near water.
• Do not expase this apparatus o rpping rslashing, and ensure that no objects illed with i, suchas vase, are laced on the apparatus.

WARNING: T0 REDUCETHE RISK OFFIRE R ELECTRIC SHOCK, D0 NOT EXPOSE THIS APPARATUS TO RAI 0R MOISTURE.

CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS THERE IS UNINSULATED, DANGEROUS VOLTAGE WITHIN THE PRODUCT ENCLOSURE THAT MAY PRESENT A RISK OF ELECTRICAL SHOCK.
THIS SYMBOL ON THE PRODUCT MEANS THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THIS GUIDE.

CAUTION FCC AND IC STATEMENT FOR USERS (USA AND CANADA ONLY)
This  devic compiies with part 15 of the FCCRues. Opeation s subjet to the followingtwo conditions: 1) his device may ot ause harmful teference, and (2) this device mustaceptany interference received,induding interference that may cause undesired operation.
CAN ICES-003(B)/NMB-003(B)
FCCSDOCSUPPLIER’S DECLARATION OF CONFORMITY
HARMAN International hereby decares that this equipment sin compliance withthe FCCPart 15 SubpartB.
The declration of conformity may be consultedinthe support secton of our Website,accessible from wivwjbl.com
Federal Communication Commission Interference Statement

This equipment hasbeen tested and found o comply with th it for a Class B digtal device, pursuant o Part 15 of the FCC Rules. These s are designed o providereasanable protection against harful ntrfernce in atesidential nstalaton. This equipment generates, uss and can adiate radiv frequency energy and, fnot installed and used in accordance with theinstructions, may cause harmful ntrferencet radio communicatins, However, ther is no quarante that ntrference will ot occur n a articula instllation.
If this equipment does cause harmiul iterference to radio or telvison eception, which an be etermined by turing the equipment off and on, theuseris encouraged fo ry to crrect the nterference by o or more of thefllowing measures:

• Rearientor elocatethe receving antenna.
• Incease the separation etween the equipment and recever,
• Connectthe equipment into n outet on a it iferent rom that o which thereceiveris conected.
• Consutthedealer or an experienced radio/TVtechnician for elp.

Caution: Changes or modifctionsnot expresly approved by HARMAN could voidthe usr’ authority to operate the equipment.

For Products That Transmit RF Energy:
(i) FCCAND ICINFORMATION FOR USERS
This device complis with Part 1 of the FCC rulesand Industry Canada license- exempt RS standard(s). Operation i subject o the following two conditions:
(1) This device may not cause harmiul ntrference; and (2 this device must acceptany inerference eceived, incuding interference that may Guse undesied operation.
(ii) FC/C Radiation Expasure Statement
Ths equipment comples with FCC and ISED radiation exposure it set forth foran uncontrolled environment,Tisequipmentshould b instlled and operated with minimum distance 20 betvieen the radiator & your body, In casethis equipment has to subject to FCC/AC SAR Specific Absorption Rate) exposuretest,tis equipments designed to et the requirements for exposure o raio waves esablshed by the FCCand ISED. Theserequirements seta SARIimit of 1.6 W/kg averaged over one gram f tssue. The highest SARvalu reported underthis standard during product entiication for use when propely wor o the bodyoron the head, with noseparation. To meet RF exposure guidelines and reduceexposure o RF energy during the operaton,tis equipment should b positione atleast i distance away from the body orthe head.
For radio equipment operates in 5150-5850MHz
FCCand IC Caution:
High power radars are allcated as prmary usersofthe 5.25 10535 Ghzand 516510585 Ghz bands. These radarstations an cause interference with and/or damage o LE LAN (Licence-Exempt Local Aea Netwrk) devices. No confguration controls are provided forthis wireless equipmentallowing any change i the frequency f operatons utsid the FCCgrant f authorization for USoperation according to Part 15,407 of the FC ules,
ICCaution:
Usershould als be advised tha:
(i) The deicefo operation n the band 5150- 5250 Mz s only for indoor useto educethe poentil fo harmful nterfernceto o-channel mobile satelltesystems; i) the maimum antenna gain permittd for device inthe bands 5250 5350 MHz and 5470 – 5725 Mz shall comply viththe eigp.imit and
(i) The maximum antenna gan permittd fr device inthe band 5725 – 5825 Mizshallcomply with the … lmits specified for oint-to-point and non point-to- point operaton as approprate.
Use Restriction Attention n European Union,aperation s limited to ndoor use withinthe band 5150-5350 Mz
Correct disposalof this product (Waste Electical & Electronic Equipment)
This symbal means the product must not e discarded as household waste, and should be delivered to an appropriate allection faityfo ecycing. Proper disposaland recyling helps protect natura esources, human health and the environment.For more nformation on disposaland recycing ofthis product contact yourlocal municipalty, disposa servie,orthe shop where you bought this product.

Safety Instruction

PRODUCT REGISTRATION
register.jbl.corn
SIGN UP & STAY TUNED
Register your product
‘Product registration may not be available for all countries https://register.jbl.com/?utm_source=qr_code&utm_medium=w_and_s&utm_campaign=w_and_s

Installation option with the mounting frame

1. Insert the mounting frame into the car dashboard.
2. Select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the frame in the panel.
3.  Make all the necessary connections and insert the unit into the mounting frame.
4. Attach the decorative frame to the front of the unit.
5. If there is need to remove the head unit, use the remove tools included in the Kit.

Installation option without the mounting frame, but using the factory head unit bracket in the car dashboard

1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted).
2. Attach the head unit to the brackets on both sides of the unit in at least two places. To do this, use the fixing screws supplied with the head unit. Do not use screws with longer lengths or other thread sizes, as this may damage the device.

Connecting to the head unit
Location of the connectors on the back of the head unit:

Note 1:
The red wire of the unit can only be connected to the ignition circuit (ACC).
Connecting it together with the yellow wire to a permanent B+ can lead to a discharge of the car’s battery during prolonged parking.
Note 2:
In some vebhicles, the location of the red and yellow wires in the ISO connector may be reversed. If the settings are reset every time when the car ignition is turned off, swap the red and yellow wires in the connector.
Be careful when connecting the head unit. Incorrect connection can lead to its breakdown and void the right to warranty service.

Specifications

General:

• Power supply: 12V DC on-board network
• Type of on-board network: with a negative terminal on the body (“mass”)
• Supply voltage range: 11.0- 144V
• Recommended speaker impedance: 4 ohms
• Rated Output Power: 4 x 50 W peak
• Installation dimensions (W x H x D): 178 x 50 x 87 mm
• Fuse rating: 10A

Tone Controls:

• Bass (at 100 Hz): -10 dB / +10 dB
• Treble (at 10K): -10 dB/ +10 dB

USB/SD:

• Signal to noise rz?fio: no less than 70 dB
• Channel separatio -no Iess-than 70d8
• Frequency response: 20 Hz – 20 kHz

FM Radio:

• Frequency coverage: 87.5 – 107.9 MHz
• Sensitivity (S/N -30 dB): 12 dBu
• Channel Separation: >30 dB

Bluetooth:

• Operating range: up to 10 m
• Supported profiles: HFP, HSP, A2DP, AVRCP

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.and any use of such marks by HARMAN Intenational Industies Incorporated is under lcense. Other trademarks and trade names are those of thir respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>