savio AK-60 M.2 NVME Drive Cooler User Manual
- June 12, 2024
- Savio
Table of Contents
savio AK-60 M.2 NVME Drive Cooler
Thank you for choosing Savio products!
- If our product meets your expectations, share your opinion with other people on the portal center.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
- If there is something that we could improve on our products, please write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.
Before starting the use of the purchased device it is recommended to read the whole manual.
Kit contents
- AK-60 cooler
- 3 × thermal pad
- Screwdriver
- 4 × mounting screw
- User manual
Device installation
- Heatsink
- Thermal pad
- M.2 drive
- Thermal pad
- Mounting rail
- Place the thermal pad in the mounting rail.
- Insert the M.2 drive into the mounting rail (over the previ- ously mounted thermal pad).
- Place the second thermal pad on the drive.
- Put the heatsink on and then secure it with mounting screws.
- Place the assembled set into the M.2 slot on the motherboard of your PC or PS5 console and then secure it with a screw.
* Remember to remove the protective fi lm on both sides before placing the thermal conductive tape.Technical specifi cation:
- Supported drives: M.2 NVME
- Supported drives sizes: 2280
- Single-sided / Double-sided M.2 support: Yes
- Size: 75 × 23 × 10 / 11 mm (height depends on the type of drive)
Safety conditions
- Use the product in accordance with its intended use, as im-proper use may damage the product.
- Do not expose the device to moisture, heat or sunlight and do not use the product in a dusty environment.
- The device should be cleaned only with a dry cloth.
- Independent repairs and modification result in automatic loss of the warranty.
- Hitting or dropping may damage the product.
Warranty
The warranty covers a period of 24 months. Independent repairs and modifications result in the automatic loss of the warranty. War-ranty card is available for download on our website: www.savio.net.pl/en/service
Information of the utilization of electrical and electronic equipment and batteries
This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthalate-tes) which can get into air, soil, and groundwater when leak-ing from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesions of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protection through proper waste collection. In such a way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for the production of new equipment.
Information for customers and contractors and communication regarding complaints:
Pursuant to Article 13 sections 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak. pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6 (1) (b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of the Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision-making, including profiling referred to in Article 22 Sections 1 and 4 of the GDPR of April 27, 2016.
PRODUCER: Elmak Sp. z o.o. ul. Morgowa 81 35-323 Rzeszow www.savio.net.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>