Bluestone TWS34 Urban Wireless Earbuds User Manual

Bluestone TWS34 Urban Wireless Earbuds

INTRODUCTION

Bluetooth Urban headphones are exactly what you need to walk down the streets of your hometown city and get lost in the world of music. These headphones feel so sleek in your ear, you will forget you are even wearing them! They are incredibly easy to pair and even easier to use. The case has a beautiful LED display that tells you exactly how much energy your case has to give in a digital format. Never leave home not knowing how charged your headphones are again!

PACKAGE CONTENTS

• 2x Individual Earbuds
• 1x Charging Case
• 1x Charging Cable

PRODUCT OVERVIEW

SPECIFICATIONS & FEATURES

• Charging Case
• Bluetooth v 5.0
• Noise Isolating
• Up to 60-foot Range
• Up to 24 Hours of Continuous Play
• Pre-Paired Technology
• Anti-Interference Transmitter
• Ergonomic Fit
• High Capacity Charging Case

HOW TO USE
Charging Case:

1. Connect the Micro USB end of the provided Charging Cable to the Micro USB Port of the Charging Case.
2. Connect the USB end of the USB Cable to any USB Charging Port.
3. While charging the Charging Case Indicator Lights will blink.

Charging Earbuds

1. Charge the Earbuds by placing them into the already-charged case.
2. The Ear Bud Indicator Lights will glow red while being charged.
3. All Indicator Lights will turn off once the earbuds are fully charged.

HOW TO USE
Pair Both Earbuds (TWS)

1. Simultaneously hold down the Multi-Function Touch Button on Both earbuds for 3 Seconds.
2. The Pairing Indicator Light will blink red and blue and a sound will prompt that they are being paired.
3. The blue light will blink slowly to indicate that they have been paired.
4. Select “Bluestone Urban “from our device’s Bluetooth Interface

Make a Call

1. Connect the earbuds to your Phone’s Bluetooth.
2. To receive an incoming call press the Multi-Function Touch Button once.
3. To deny an incoming call quickly press the Multi-Function Touch Button twice.

Listen to Music

1. Connect the earbuds to your Phone’s Bluetooth.
2. Use your Phone’s interface to select your music.
3. Press the Multi-Function Touch Button to Pause/Play Music.

Turn Off the Earbuds

1. Press the Multi-function Touch Button for 5 Seconds or until the red light blinks
2. The earbuds will automatically turn off if they are out of reach of the Bluetooth Device or if the Bluetooth Device shuts down.

CARE AND SAFETY

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper rep: may place the user at serious risk.
• Keep the unit out of reach of children.
• This unit is not a toy.

BATTERY DISPOSAL

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures. SMTEK GROUP INC., All rights reserved. MicroTech is a trademark of SM TEK GROUP INC. All trade names are the registered trademarks of the manufacturers listed. New York, NY 10001 www.smtekgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>