Huffy Green Machine Owner’s Manual

June 12, 2024
HUFFY

Huffy Green Machine Logo Owner’s ManualHuffy Green
Machine

Huffy Green Machine

Date Code Label Here

Assembly VideoHuffy Green Machine - Qr Codehttps://l.ead.me/bdhNNf

This manual contains important safety, assembly, operation and maintenance information.
Please read and fully understand this manual before operation.
Save this manual for future reference.
Thank you for choosing Huffy!

WARNING – TO AVOID SERIOUS INJURY:

  • The user must be 8+ years
  • Not for children with a body mass of more than 82 kg (180 lb).
  • Never allow more than 1 rider

IMPORTANT!
BEFORE YOUR FIRST RIDE: Read entire manual, including all safety warnings
https://www.huffybikes.com/global-contacts/

ASSEMBLY Help CONTACT information REGISTER Product

Huffy Green Machine - Qr Code 1| |
https://l.ead.me/bdhNNf| https://l.ead.me/bcMxfu| https://l.ead.me/bb958b
Huffy Green Machine - Overview| Huffy Green
Machine - Overview 1
---|---

Huffy Green Machine - Assemblyhttps://l.ead.me/bdhNNf

| Huffy Green Machine - Assembly 1

Huffy Green Machine - Assembly 2https://l.ead.me/bdhNNf

| Huffy Green Machine - Assembly 3

INTRODUCTION

Torque Table
Recommended Torque:
Use of a torque wrench is recommended. Recommended torque for each fastener is listed below. In addition to tightening to the recommended torque, please ensure the parts of the product are suffi ciently tightened by performing the functional tests (in the component assembly sections of the owner’s manual) on each component as it is tightened.
NOTE: Please check that all fasteners on the product are torqued according to the table below:

Recommended Torque for clean, dry threads: How to Measure:
Fastener Size Torque (N•m / ft-lb)

width at the THREADS as shown.
M4 mm (.157 in)| 2.8 N•m (24.78 in-lb)|
M5 mm (.196 in)| 5.5 N•m (48.67 in-lb)
M6 mm (.236 in)| 9.5 N•m (84.08 in-lb)
M7 mm (.275 in)| 16.3 N•m (12 ft-lbs)
M8 mm (.314 in)| 23 N•m (17 ft-lbs)
M10 mm (.393 in)| 44.7 N•m (33 ft-lbs)

Tools Recommended

Owner’s Model Identifi cation Record
NOTE: This information is only available with model itself. It is not available from Huff y.
Model number is on the packaging and instruction manual.
Write the model number below to keep it for future reference.
If the model is stolen, give this number and a description of the model to the police. This will help them find the model.
Model Number:
Purchase Date:
Model Name:

Safety Information

MEANINGS OF WARNINGS:
This symbol is important. See the word “CAUTION” or “WARNING” which follows it.
The word “CAUTION” is before mechanical instructions. If you do not obey these instructions, mechanical damage or failure of a part of the product can occur.
The word “WARNING” is before personal safety instructions. If you do not obey these instructions, injury to the rider or to others can occur.
All wheeled vehicles will provide safe, enjoyable transportation and recreation when used and maintained properly. Like bicycling, skateboarding, and in-line skating, riding can be dangerous even under the best of circumstances. We do not want you to get hurt. Please follow all safety rules and operating instructions.
This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
WARNING:

  • CHOKING HAZARD. Small parts. Not for children under 3 years.
  • Adult assembly required.
  • DO NOT add a motor to the product.
  • Replace worn or broken parts immediately with original equipment.
  • If anything does not operate properly, discontinue use.

WARNINGS – ASSEMBLY
Wheels, Tire & Axle:

  • The rear axle nuts must be securely tightened to ensure rear wheels do not come loose from the axle.
  • All hardware must be sufficiently tightened to ensure it does not come loose.
  • Recommended tube/tire inflation pressure is on the tire sidewall.

Pivot Bolt:

  • Pivot bolt must be correctly and securely installed to ensure it does not come loose.

Steering Function:

  • Ensure the Steering Levers move freely, front to back and all attaching hardware is securely tightened.

Seat Back:

  • Ensure the seat back is secure each time the seat back is moved.

Coaster Brake:

  • Ensure seat back is adjusted so rider can easily reach the front wheel coaster brake.

WARNING: This unit has no conventional brakes. Operator back-pedals to slow or stop.
IF YOU HAVE ANY QUESTIONS REGARDING THE OPERATION OF THIS PRODUCT, PLEASE REFER TO THIS OWNERS MANUAL OR CALL CONSUMER SERVICE.

Notes on Assembly
THIS OWNER’S MANUAL IS MADE FOR SEVERAL DIFFERENT MODELS:

  • Some illustrations may vary slightly from the actual product.
  • Follow instructions completely.
  • If the product has any parts that are not described in this manual, look for separate “Special Instructions that are supplied with the product.
  • Models may have different accessory items such as bags, baskets, reflectors, cup holders, racks, etc.
  • All features, components and accessories are not included on all models.
  • Use the Index page to locate specific sections of this manual.
  • Please read through this entire manual before beginning assembly or maintenance.
  • If you are not confident with assembling this unit, refer to a local bike shop.

WARNING: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider while seated on the product.
Do not dispose of the carton and packaging until you complete the assembly of the product. This can prevent accidentally discarding parts of the product.
Recommended Handling Method

Huffy Green Machine - Handling Method

OPERATION

Steering your Green Machine
STEERING FUNCTION:

  • Pulling back on the left lever, and pushing forward on the right lever will turn the product towards the left.
  • Pulling back on the right lever, and pushing forward on the left lever will turn the product towards the right.
  • Steering this product takes some practice. Ensure the rider can properly steer the product. Practice in an open area.Huffy Green Machine - STEERING FUNCTION

Leaning into a Turn
WARNING: Failure to lean in the direction of the turn as shown can result in the unit rolling over.

Huffy Green Machine - Leaning into a Turn

Coaster Brakes
These models are equipped with a ‘coaster’ brake that is operated by rotating the crank backwards.
OPERATION:
Operate the coaster brake as follows:

  • Push the pedal down and forward as shown.
  • As you push the pedals with increasing force, the braking action of the coaster brake increases.Huffy Green Machine - Coaster Brakes Forward to Pedal, Backwards to Stop

WARNING: Adjust Seat so that rider can fully use Coaster Brake safely.
WARNING:
If you do not obey the following instructions, injury to the rider or to others can occur:

  • When you ride the product the first time, test the coaster brake and practice using it at a low speed in a large, level area that is free of obstructions.
    • Every time the product is ridden, make sure the Bolt on the Brake Arm A is securely attached to the Fork Mount B. The coaster brake will not work correctly if the brake arm is loose or is not attached securely to the Fork Mount.
    • Removal of Brake Arm Bolt A will result in brakes NOT working.Huffy
Green Machine - coaster brake

MAINTENANCE

Maintenance and Service
WARNING:

  • As with all mechanical components, this product is subjected to wear and high stresses. Different materials and components might react to wear or stress fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of crack, scratches, or change of coloring in highly stressed areas indicate that the life of the component has been reached and should be replaced.
  • Inspect the product frequently. Failure to inspect the product and to make repairs or adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are correctly assembled and adjusted as written in this manual and any “Special Instructions”.
  • Check the tightness of the fasteners before each use. Replace any fasteners that are damaged.
  • Immediately replace any damaged, missing, or badly worn parts with original equipment.
  • Avoid wearing loose clothing and items when riding or performing maintenance to reduce risk of entrapment that could result in an injury.
  • Frequently check tires and wheels for excess wear or damage. If equipped with pneumatic tires, regularly check tire pressure and adjust as needed. Tire pressure is listed on side of tires.
  • Check Brakes for proper function and condition. If model has hand brakes, check that brake lever provides proper braking when squeezed and that brakes do nut rub.
  • Keep the product clean and free of dirt, dust and water. This will prolong the useful life of the product.
  • Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do not use automotive wax, abrasive cleaners or wash the vehicle with soap and water.
  • High temperatures, intensive use, and impact damage may be invisible to the user and result in injury to rider. If you suspect damage or excess wear to wheel rims, frame, fork, suspension joints (if any), or composite components (if any), seek service from bike shop for repair.
  • Make sure all fasteners are correctly tightened as written in this manual and any “Special Instructions”. Parts that are not tight enough can be lost or operate poorly. Over tightened parts can be damaged. Make sure any replacement fasteners are the correct size and type.
  • Self-locking nuts and other self-locking fasteners may lose their effectiveness when re-used.
  • Store indoors when not in use. Keep it away from sources of heat, such as stoves and heaters.
  • Store in a clean dry environment. Vehicle’s left outside in weather can deteriorate very quickly. Prolonged exposure to UV-rays, rain, and outdoor elements may damage the enclosure materials.

NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the correct tools or if the instructions in this manual or any “Special Instructions” are not sufficient for you.
Radio Frequency Information (if applicable)
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device or charger/adapter complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna;
  • Increase the separation between the equipment and receiver;
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
  • Consult the dealer or an experienced radio/TV technician for help.

Accessory Battery Warnings
WARNING:
New and used batteries are hazardous and should be kept away from children.

  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (Carbon-Zinc) or rechargeable batteries.
  • This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used batteries immediately. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  • Battery replacement is to be conducted by an adult.
  • Dispose of batteries properly. Do not dispose of batteries in fire, batteries may explode or leak. Check local regulations for proper battery disposal.
  • Non-rechargeable batteries are not to be recharged.
  • Different types of batteries or new and used batteries are not to be mixed.
  • Only batteries of the same or equivalent type as recommended are to be used.
  • Batteries are to be inserted with the correct polarity.
  • Keep the unit from getting wet.
  • The battery supply terminals are not to be short-circuited.
  • Rechargeable batteries are to be removed from the unit before being charged.
  • Rechargeable batteries are only to be charged under adult supervision.
  • When installing new batteries, look for dangers such as damage, heat, liquid leakage etc.
  • Remove batteries when product is not used for long periods of time.
  • Exhausted batteries are to be removed from the toy.

LED Battery Replacement (if equipped)
Phillips Micro Screwdriver Required

PARTS:

  1. Screws (m2.5 x 8mm)
  2. Battery Cover
  3. LR44 Alkaline Batteries
  4. LED Lights

Huffy Green Machine - LED Battery Replacement BATTERIES:
Right Wheel: 3 LR44 Alkaline
Left Wheel: 3 LR44 Alkaline
Seat Bottom: 3 LR44 Alkaline

Front Tire
Maintenance:

  • Frequently check the tire inflation pressure because all tires lose air slowly over time. For extended storage, keep the weight of the product off the tires.
  • Do not use unregulated air hoses to inflate the tire/tubes. An unregulated hose can suddenly over inflate tires and cause them to burst.
  • Replace worn tires.

WARNING: Do not ride or sit on the unit if a tire is under inflated. This can damage the tire, inner tube and rim.
Inflating the Tires:

  • Use a hand or a foot pump to inflate the tires.
  • Service station meter-regulated air hoses are also acceptable.
  • The maximum inflation pressure is shown on the tire sidewall.
  • If two inflation pressures are on the tire sidewall, use the higher pressure for on-road riding and the lower pressure for off-road riding.
  • The lower pressure will provide better tire traction and a more comfortable ride.

Before adding air to any tire, make sure the edge of the tire (the bead) is the same distance from the rim, all around the rim, on both sides of the tire. If the tire does not appear to be seated correctly, release air from the inner tube until you can push the bead of the tire into the rim where necessary. Add air slowly and stop frequently to check the tire seating and the pressure, until you reach the correct inflation pressure.

Huffy Green Machine - Inflating

Recommended Tire Pressure (kilopascals):
Frequently check the tire inflation pressure because all tires lose air slowly over time. For extended storage, keep the weight of the product off the tires.
Recommended tire pressure is marked on the side of the tire.

(PSI to kPa Conversion)

PSI| kPa
20| 140
30| 210
40| 275
50| 345
60| 415

Huffy Green Machine - TIRE FILLER VALVE ACCESSING THE TIRE FILLER VALVE: (models with Wheel Covers)

Rear Wheel Replacement

Huffy Green Machine - Rear Wheel Replacement

REAR WHEEL REPLACEMENT:

  • Remove Hardware (x4) A from Rear Wheel B and Rear Axle Hub C.
  • Replace with new Rear Wheel B.
  • Attach to Rear Axle Hub C using existing Hardware (x4) A.

Lubrication
WARNING:

  • Do not over lubricate. If oil gets on pedals, injury to the rider or to others can occur.
  • Keep all oil off the surfaces of the pedals where your feet rest.
  • Using soap and hot water, wash all oil off the wheels, the pedals, and the tires.
  • Rinse with clean water and dry completely before you ride the model.
  • Using a light machine oil (20W), lubricate the model according to the following table:
What When How
Pedals Every six months Put four drops of oil where the axles go into the

pedals.

WARNINGS

Safety Information
WARNINGS:
All of these safety rules and guidelines must be followed or serious injury or death may occur to the user. Keep this product away from small children.

  • Adult assembly required. Choking hazard to children under the age of 3 years – contains small parts. Keep small children away when assembling.

  • To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one (1) rider.

  • RISK OF FIRE. Do not bypass fuse. Replace only with size and type.

  • Unit shall not be modified from original design and configuration.

  • Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drivetrain.

  • Body parts such as hands, legs, hair and clothing can get caught in moving parts. Never place a body part near a moving part or wear loose clothing while using the vehicle.

  • Always use vehicle in a safe, secure environment on flat, smooth paved surfaces only.

  • Do not use the vehicle in an unsafe manner or at an unsafe speed. Not intended for jumps. Examples include but are not limited to:
    • Do not pull or push the vehicle with another vehicle or similar device.
    • Do not tow anything behind the vehicle.
    • Never use near streets, water, swimming pools, hills, steps, drop-offs, sloped surfaces or driveways, wet areas, flammable vapors, in alleys, at night or in the dark.
    • Do not use the vehicle in unsafe conditions such as snow, rain, loose dirt, mud sand or fine gravel. This may result in unexpected action such as tip over and skidding. Using the vehicle in loose dirt, mud, sand, or fine gravel may damage the electronics and gear box inside the vehicle.
    • Product shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause uncontrolled operator/passenger actions or reactions.

  • Vehicle Cautions: Do not overload the vehicle. Do not drive in very hot weather, components may overheat. Do not allow water or other liquids to come in contact with the battery or other electric components if equipped. Do not tamper with the electrical system if equipped. Doing so may create a short, causing the fuse to trip or other damage including fire.

  • Before each cycle of operation, the operator must perform the pre-operation checks including the following items:
    • Check that any guards and pads originally supplied are in proper place and in serviceable condition.
    • Ensure that the area that the unit is to be operated in is safe and suitable for safe operation;
    • Ensure that the braking system is functioning properly;
    • Ensure that all safety labels are in place and understood by the operator and any passenger;
    • Ensure that any and all axle guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition;
    • Ensure that tires are in good condition, inflated properly, and have sufficient tread remaining.

  • Operators shall adhere to all recommendations and instructions, as well as comply with all laws and ordinances:
    • Units without headlights shall be operated only with adequate daylight conditions of visibility;
    • Owners are encouraged to highlight (for conspicuous) using lighting, reflectors, and for low-riding units, signal flags on flexible poles.

  • Persons with the following conditions shall be cautioned not to operate the unit:
    • Those with heart conditions;
    • Pregnant women;
    • Persons with head, back, or neck ailments, or prior surgeries to those areas of the body;
    • Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to recognize, understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.

  • Additional Safety Warnings:
    • Operators shall always use appropriate protective clothing and equipment, including but not limited to a helmet, with appropriate certification. Proper shoes required.
    • Components shall be maintained and repaired in accordance with this manual and use only authorized replacement parts with installation performed by dealers or other skilled persons.
    • Avoid sharp bumps, drainage grates, and sudden surface changes.
    • Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
    • Before using the vehicle the user must understand the controls and safety issues. They must also demonstrate the capability and skill to handle the vehicle and operate its controls to avoid falls or collisions. It is the responsibility of the adult to educate the child and determine if they are capable of operating the vehicle safely and that safe practices are used when using the vehicle.
    • Before using the vehicle the child must understand the controls and safety issues. They must also demonstrate the capability and skill to handle the vehicle and operate its controls to avoid falls or collisions.
    • After complete assembly, remove and dispose of all protective material and poly bags. Keep poly bags away from child. Be sure to remove all packaging materials and parts from underneath the vehicle body.
    • Ensure child uses common sense and safe practices when using the vehicle.
    • This vehicle is intended for recreational & entertainment USE ONLY. Should ONLY be used in areas designated as such.

ALWAYS WEAR YOUR HELMET WHEN RIDING THIS PRODUCT!
Always read the user manual that comes with your helmet to make sure it is fi tted and attached properly to the wearer’s head according to the fi tting instructions described in the user manual.

WARRANTY

Limited Warranty – US
General:
Part or model specifications are subject to change without notice.
This Limited Warranty is the only warranty for the product. ALL WARRANTIES OTHER THAN STATED HEREIN ARE DISCLAIMED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW. ALL LIABILITY FOR INCIDENTAL, PUNITIVESPECIAL, OR CONSEQUENTIAL DAMAGES ARE EXPRESSLY DISCLAIMED, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW.
The only uses for this product are described in this manual.
Warranty registration is not required.
The Limited Warranty extends only to the original consumer and is not transferable to anyone else.
What does this Limited Warranty cover?
This Limited Warranty covers defects in workmanship and materials for all parts of the product except those indicated below as not warranted.
What must you do to keep the Limited Warranty in effect?
This Limited Warranty is effective only if:

  • Product is completely and correctly assembled.
  • Product is used under normal conditions for its intended purpose (see the following section for excluded activities).
  • Product receives all necessary maintenance and adjustments.
  • Product is used for general transportation and recreational use only.

What is not covered by this Limited Warranty?
This product is designed for recreational use only. This Limited Warranty does not cover normal wear and tear, normal maintenance items, or any damage, failure, or loss that is caused by improper assembly, maintenance, adjustment, storage, or use of the product. This Limited Warranty does not extend to future performance.
This Limited Warranty will be void if the product is ever:

  • Used in any competitive sport.
  • Used for stunt riding, jumping, aerobatics or similar activity.
  • Modified in any way.
  • Modified with the addition of a motor.
  • Ridden by more than one person at a time.
  • Exceeds weight limit.
  • Rented, sold, or given away.
  • Used in a manner contrary to the instructions and warnings in this Owner’s Manual.

What will The Manufacturer do?
Manufacturer’s sole and exclusive obligation under this Limited Warranty is to repair and/or replace, at its sole option, any covered defect in workmanship or materials.
How do you get service?
Contact the Customer Service Department.

  • See included list for Customer Contact information.

What rights do you have?
This Limited Warranty gives you specific legal rights. You may also have other rights which vary from State to State.
For how long does this Limited Warranty last?

  • When used in this Limited Warranty, the phrase “for life” means for as long as the original consumer owns the product.
  • Warranty is from date of purchase.
  • Resin wheels are not warranted.
  • Frame and all other components are warranted for six (6) months.

Limited Warranty (Australia)
General:

Part or model specifications are subject to change without notice.
This Limited Warranty is the only warranty for the product. ALL WARRANTIES OTHER THAN STATED HEREIN ARE DISCLAIMED INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW. ALL LIABILITY FOR INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES ARE EXPRESSLY DISCLAIMED, TO THE EXTENT ALLOWABLE BY APPLICABLE LAW.
The only uses for this product are described in this manual.
Warranty registration is not required.
The Limited Warranty extends only to the original consumer and is not transferable to anyone else.
What does this Limited Warranty cover?
This Limited Warranty covers defects in workmanship and materials for all parts of the product except those indicated below as not warranted.
What must you do to keep the Limited Warranty in effect?
This Limited Warranty is effective only if:

  • Product is completely and correctly assembled.
  •  Product is used under normal conditions for its intended purpose (see the following section for excluded activities).
  • Product receives all necessary maintenance and adjustments.
  • Product is used for general transportation and recreational use only.

What is not covered by this Limited Warranty?
This product is designed for recreational use only. This Limited Warranty does not cover normal wear and tear, normal maintenance items, or any damage, failure, or loss that is caused by  improper assembly, maintenance, adjustment,
storage, or use of the product. This Limited Warranty does not extend to future performance.
This Limited Warranty will be void if the product is ever:

  • Used in any competitive sport.
  • Used for stunt riding, jumping, aerobatics or similar activity.
  • Modified in any way.
  • Modified with the addition of a motor.
  • Ridden by more than one person at a time.
  • Exceeds weight limit.
  • Rented, sold, or given away.
  • Used in a manner contrary to the instructions and warnings in this Owner’s Manual.

What will The Manufacturer do?
Manufacturer’s sole and exclusive obligation under this Limited Warranty is to repair and/or replace, at its sole option, any covered defect in workmanship or materials.
How do you report a problem with this product or submit a warranty claim?

  • Contact Customer Service in Australia or New Zealand (See included list for Customer Contact information).

  • Warranty claims can be submitted to;
    Hunter Products Pty Ltd – PH: 1800 224 094
    Email: enquiries@hunterproducts.com.au
    – Level 2, 424 Warrigal Road, Moorabbin, Victoria 3189 Australia.
    The following text is incorporated into this Limited Warranty if this product was purchased in Australia (but it is not incorporated if such product was purchased in New Zealand):

  • Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

What rights do you have?
This Limited Warranty gives you specific legal rights. You may also have other rights which vary from State to State.
For how long does this Limited Warranty last?

  • When used in this Limited Warranty, the phrase “for life” means for as long as the original consumer owns the product.
  • Warranty is from date of purchase.
  • Resin wheels are not warranted.
  • Frame and all other components are warranted for six (6) months.

AMERICA (USA)
For Fast Customer Service and email: www.huffybikes.com/contact
T: 1 800 872 2453 (US)
8877 Gander Creek Drive
Miamisburg, OH 45342
To Order Parts: www.huffybikes.com/parts| MEXICO
Para obtener Servicio al cliente rápido,
visite: www.huffybikes.com.mx
Contáctanos por WhatsApp al 222 422 4955
T: 800 1 HUFFY 1 (800 1 48339 1) (Mexico only)
E: servicio.mexico@huffy.com
---|---
CANADA
United Wheels Canada Limited
www.huffy.ca
T: 1 800 872 2453
E: huffycanada@huffy.com| AUSTRALIA
Hunter Products Pty Ltd
T: 1 800 224 094
E: enquiries@hunterproducts.com.au
233 Bay Street, Brighton Victoria, 3186,
Australia
UK
United Wheels UK Ltd
100 New Bridge Street
London, United Kingdom EC4V 6JA
T: 0330 912 7543 (U.K.)
E: support@unitedwheels.eu| NETHERLANDS
United Wheels Netherlands B.V.
Delflandlaan 1 1062EA
Amsterdam
T: +31 20 299 74 55 (EU)
E: support@unitedwheels.eu

Huffy Green Machine Logohttps://l.ead.me/bcMxfu
www.huffybikes.com/home/globalcontact/ for current contact information
H-GM-20_Man 07-25-23 m1033 GL

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals