Panasonic Slim Lint Trap Instruction Manual
- June 12, 2024
- Panasonic
Table of Contents
Slim Lint Trap
Instruction Manual
Slim Lint Trap
Model SLT
SLT OVERALL DIMENSIONS
INSTALLATION INSTRUCTIONS
- Clean the dryer top surface properly before installation.
- Align the dryer exhaust with the lint trap collar and mark the lint trap position on the top of the dryer.
- Fix double sided foam tape (not supplied) on the bottom surface of the lint trap.
- Remove the remaining side of the foam tape strips and install the lint trap on the dryer top surface as marked.
- Apply some force downwards on the lint trap to hold it firmly.
- Connect duct to inlet and outlet collar.
- Always use solid metal pipe.
- Installation of the lint trap must be done by a qualified person and be in accordance with all municipal and national codes and standards.
IMPORTANT: CLEAN LINT TRAP BEFORE EVERY DRYER CYCLE
WWW.ATMOSPHERE.COM
2480 boul. des Entreprises Terrebonne, QC, Canada 16X 418
Tel.: 450 477-1100
Fax: 514 313-5700
Toll Free: 1 800 489-1301
Email: info@atmosphere.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>