CombiSteel 7530.0020 Catering Megastore Instruction Manual
- June 12, 2024
- CombiSteel
Table of Contents
7530.0020 Catering Megastore
ASSEMBLY MANUAL WIRESHELVING
ASSEMBLY STEPS
CREATIVE KITCHENS
A | B | C | D | E |
---|---|---|---|---|
4 PCS | 4 PCS | 4 PCS | 4 PCS | 4 PCS |
- Screw the levelling feet (E) into the bottom of the four lower poles (B) Snap the plastic clips (D) into the pole grooves of the four lower poles at the same position and make sure that the arrow on the plastic clips is pointing up.
- Please make sure the wire shelf (A) is the correct way up (keep the gap in the collar faced down). Hold the wire shelf on its side and slide the top of the four lower poles through the bottom of each wire shelf as its corner until it snug fits. After four poles have been slide through the shelf collar holes, set the shelf upright.
- Snap the plastic clips into the pole grooves of the lower poles at your desired shelf height/position. Slide down the shelf from top down into the plastic clips.
- Connect the upper poles (C) with the lower poles (B) by screwing the two parts together through the screw connectors which are already present on the upper poles.
- Repeat step 3 to assemble the rest of the wire shelves.
- Once all the shelves have been installed, pushing firmly down on every shelf at the corners with a rubber mallet to ensure the shelf is in place over the plastic clips. Screw the levelling feet in or out to attain proper levelling.
- Wheels and clamps are sold separately
- Clean the shelving with a damp cloth, if necessary with soap. After cleaning, dry the shelving thoroughly
- Do NOT move the shelving when loaded
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>