VIMAR 46241.030B Wi-Fi PT 1080p Outdoor Camera User Guide
- June 12, 2024
- VIMAR
Table of Contents
46241.030B Wi-Fi PT 1080p Outdoor Camera
User Guide
46241.030B
Outdoor Wi-Fi PT camera 1080p lens 3mm dot
Package content
| | |
---|---|---|---
Camera| Power supply| Screws| Quick Guide
Characteristics
Status LED:
– Red light on = Network anomaly.
– Flashing red light = waiting for network for connection (slow blinking),
connecting to the network (fast flash).
– Blue light on = the camera is working correctly.
Reset Button: Press and hold for 5 seconds for reset the camera to the
initial values.
Installation
3.1 – Positioning
a – Ceiling type
- Fix the camera on the ceiling with screws.
b – Wall mounting type
- Fix the camera on the wall with screws.
Configuration
4.1 – Power up the camera
- Connect the camera cable to the power supply.
- Wait for the LED to status flashes, you will hear spoken feedback (“Camera ON” and then“ Camera setup ”).
4.2 – Install the App on the smartphone
Download and install the Vimal “VIEW Product” App on your smartphone by
searching for it directly in the App Reference store.
4.3 – First access
a- If you already have a account for My VIMAR. Open the App and log in
with their credentials.
b- Otherwise create a new account by tapping on the appropriate link
“Create a new account “. Carry out the following directions in the APP, enter
credentials and proceed with step 4.4.
4.4 – Add a camera
Follow the on-screen instructions to complete installation and connection to
your router.
To facilitate the operation, it is recommended to stay close to the router.
Adding via QR Code: use the camera to scan the displayed QR code on your
smartphone.
Note: after turning on the camera, the status LED lights up and will
blink rapidly.
Tap “Add device + 1 → Select device 2 → Enable next step, continue
according to the instructions on the screen 3 → Set the Wi-Fi for device 4
and continue with the procedure to view the QR code.A QR code will be displayed on the smartphone, face the phone screen
towards the camera at a distance of 15-20 cm from the lens, a beep will sound
after a few seconds, tap on “heard the beep” (refer to the pictures).
Wait for the connection to complete, after a few seconds the device will be successfully added and give spoken feedback “Online”.
ATTENTION: in order to safeguard your data and the security if you intend
to add the same camera via another account, you need to cancel the camera from
the App where it is associated, in case of return of the product, is
recommended in addition also to remove the SD card.
The camera is also compatible with the application Smart Life.
For more information see the complete manuals and updated available in the
product sheet on the site: https://faidate.vimar.com/it/it
**Specifications**
**Camera*| Image sensor| 2 Megapixel CMOS
Effective pixels| 1920(H)1080(V)
IR distance| – Night visibility up to 10 m
Day/Night| Auto(ICR)/Color/B&W
Lens| 3.0mm@F2.0, H:102°/ D:130°
pan/TILT limit| Pan 0-350° Tilt -90°-30°
**Video and Audio| Encoding| H.264 – H.265
Audio input/output| 1 MIC/1 SPEAKER included
Live| 25 fps
Functions| Alarms and night vision| Deterrent function with
configurable white light flash and siren
Movement and acoustic detection, autotrackinq
Colours night vision with configurable white light illuminator
Preset| 6 settable points
Privacy function| Blanking of the video stream
Network| Communication Protocol| HTTP, DHCP, DNS, TCP/IP, RTSP
Wi-Fi – Wireless| 2.4 GHz WIFI(IEEE802.11b/g/n)
Frequency range| 2412-2472 MHz
Transmitted RF power| _< _100 maw (20dBm)
Security| User authentication, Wi-Fi Password max 63 characters
****General| Operating temperature| -10 °C to 50 °C
Power supply| DC 12 V / 1 A
Ingress protection| IP65
Storage| Micro SD card, max 128 GB (Not included) Protected movie
recording
Dimensions| 148 x 103 x 108mm
****Power supply Specifications**
****Power supply| Manufacturer| ZHUZHOU DACHUAN ELECTRONIC TECHNOLOGY
CO LTD.
Address| BUILDING A5 NANZHOU INDUSTRIAL PARK, ZHUZHOU HUNAN 412101, CHINA
Model| DCT12W120100EU-A0
Input voltage| 100-240 V
Input AC frequency| 50/60 Hz
Output voltage| 12,0 Vd.c.
Output current| 1,0 A
Output power| 12,0 W
Average active efficiency| 83,7%
Efficiency at low load (10%)| 78,2%
No-load power consumption| 0,07 W
Conformity| ERP Directive
2019/1782 Regulation for external power supplies (EU) n. 2019/1782
Operation disclaimer for Wi-Fi cameras
The Wi-Fi camera allows images to be viewed on the buyer’s (hereinafter “Customer”) smartphone and / or tablet, by simply installing the Vimal VIEW Product application. The visualization of the images is allowed only through the presence, in the house / building in which it is installed, of a connection to a home Wi-Fi network with Internet access which must have the following characteristics:
- IEEE 802.11 b / g / n (2.4 GHz) standard Operating modes:
- Networks: WEP, WPA and WPA2.
- TKIP and AES encryption protocols are supported for WPA and WPA2 networks.
- Do not support “hidden” networks (hidden SSID).
To use the service The Customer must have technical equipment that allows connection to the Internet and sign an agreement with an ISP (Internet Service Provider); this agreement may involve related costs. Vicar remains unaffected by the choice of technical equipment and the agreement with the ISP (Internet Service Provider). The consumption of data through the use of the Vimal VIEW Product App, both in the home / building and outside the Wi-Fi network that the Customer has used for installation, remains the responsibility of the Customer.
The interaction and correct operation remotely via the Vimar VIEW Product App,
through the Internet network of your mobile phone / data provider, with the
Wi-Fi camera installed by the Customer may depend on:
a) type, brand and model of the smartphone or tablet;
b) quality of the Wi-Fi signal;
c) type of the home internet access contract;
d) type of data contract on the smartphone and tablet.
The camera supports connection via P2P technology, it is therefore necessary
to check that your ISP (Internet Service Provider) does not block it.
Vimar is exempt from any liability for any malfunctions due to non-compliance
with the minimum technical specifications necessary for the operation of the
product which are indicated above.
To resolve any problems, refer to the complete manual and the “Questions and
answers” section on the product page at the following Internet address:
faidate.vimar.com. Vimar reserves the right to
modify the characteristics of the products shown at any time and without
notice.
Conformity
RED directive. RoHS directive
Standards EN 301 489-17, EN 300 328, EN 62311, EN 62368-1, EN
55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN IEC 63000.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
Vimar Spa declares that the radio equipment complies with Directive
2014/53/EU. The full text of the EU declaration of conformity, the instruction
manual and the configuration software are on the product sheet available at
the following Internet address: faidate.vimar.com
WEEE – Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this
means the product must not be included with other general waste at the end of
its working life. The user must take the worn product to a sorted waste
center, or re-turn it to the retailer when purchasing a new one. Products for
disposal can be consigned free of charge (without any new purchase obligation)
to retailers with a sales area of at least 400m2, if they measure less than
25cm. An efficient sorted waste collection for the environmentally friendly
disposal of the used device, or its subsequent recycling, helps avoid the
potential negative effects on the environment and people’s health, and
encourages the re-use and/or recycling of the construction materials.
Privacy
Privacy Policy
As required by Regulation (EU) 2016/679 on the protection of personal data,
Vimar S.p.A. guarantees that the electronic processing of data minimizes the
use of personal and other identification information, which is only processed
to the extent strictly necessary in order to achieve the purposes for which
it was collected. The personal information of the Data Subject is processed in
accordance with the product/application privacy policy available on our
website www.vimar.com in the legal section
(Product – App Privacy Policy – Vimar energies positive).
Please remember that, pursuant to Regulation (EU) 2016/679 on the protection
of personal data, the user is the controller of processing for the data
collected during use of the products and, as such, is responsible for adopting
suitable security measures that protect the personal data recorded and
stored, and avoid its loss.
Should the camera monitor public areas, it will be necessary to display – in a
visible manner – the information about the ‘area under video surveillance’
envisaged in the privacy policy and specified on the website of the Italian
Data Protection Authority (Guarantee). The recordings may be stored for the
maximum period of time envisaged by legal and/or regulatory provisions in the
place where the camera has been installed. If the regulations in force in the
country of installation envisage a maximum storage period for the image
recordings, the user shall ensure they are deleted in compliance with the
applicable regulations.
In addition, the user must guarantee safe possession of and control over its
passwords and the related access codes to its web resources. The Data Subject
must provide the password for access to its system when requesting help from
the Vimar Support Centre, so that the related support can be provided.
Provision of the password represents consent for processing. Each Data Subject
is responsible for changing the password for access to its system on
completion of the work carried out by the Vimar Support Centre.’
Vaile Vicenza, 14
36063 Marostica VI – Italy
www.vimar.com
49401860A0 00 2210
References
- Canale Fai da te
- Home automation, electrical equipment, smart home - Vimar energia positiva
- Canale Fai da te