TOZO T5 True Wireless Stereo User Guide
- June 12, 2024
- TOZO
Table of Contents
TOZO T5 True Wireless Stereo
How to wear your TOZO earbuds
- Step 1: Adjust sound holes downwards and push earbuds into your ears.
- Step 2: Slightly move earbuds to fit you best.
Do not keep sound hole upwards
How To Pair Auto Pairing Steps
- Pick up two earbuds from charging case, and they will auto power on and pair with each other in 1s.
- LED blinks red and blue when earbuds are pairing.
- On phone, search for TOZO-T5 and tap to connect.
Factory Setting
For any connectivity problem, please refer the following steps to reset
earbuds to factory:
- Pick up two earbuds from charging case then keep touching both panels for 5s or until LEDs glow solid red to power off them.
- Once again, keep touching both panels for 5s or until LEDs blink red and blue. Then triple touch either panel to reset earbuds to factory(LED will tum on red for 1s).
Note:
If earbuds fail to connect with phone, please remove the connectivity record
and retry the above steps.
Left Earbud
Power on : Pick up the earbud from charging case.
Power off: Keep touching panel or put the earbud back into the case.
Play/Pause
Skip track backward
Volume control
Answer
End
Ignore
Activate the voice assistant.
The voice assistant function requires your phone system’s support
Right EarBud
Power on : Pick up the earbud from charging case.
Power off: Keep touching panel or put the earbud back into the case.
Play/Pause
Skip track backward
Volume control
Answer
End
Ignore
Activate the voice assistant.
The voice assistant function requires your phone system’s support
Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories, please visit:
www.tozostore.com
For any assistance please contact
Email: info@tozostore.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>