AIMIBO Wireless HD Transmitter Receiver Kit User Manual
- June 5, 2024
- AIMIBO
Table of Contents
Wireless HD Transmitter & Receiver Kit
User manual
Connection Diagram
Receiver-RX
Transmitter-TX
Hardware Casting
Wireless HDMI Receiver and Transmitter, Plug and Play
- Plug external antenna to Receiver and plug it into TV or other HDMI input devices, plug the USB C cable into a wall charger (5V/2A) or TV’s USB port.
- Switch the TV to the HDMI channel, then show out the blue screen
- In the first time using, you need to choose the language by pressing the middle button of the Receiver, then long-press 2-5 seconds to confirm. If you need to change language, long-press it for 10 seconds, and the system will automatically restore.
- Plug Transmitter into a laptop or other HDMI output devices, and plug the USB cable into the USB power port. Indicator light up, wait 10 seconds for auto-sync.
※ Some HMDI output ports can supply power to the transmitter, no need to use the USB-C power charging and work the same.
- Connect transmitter and receiver to devices
- Long press the Receiver’s behind button for 3 seconds, then the TV will show out ”Release the button to pair with EZCast TX”
- Long press the Transmitter’s middle button for 3 seconds, when the indicator light is off, release the button, then the indicator light would flash quickly after restarting, and the TV will show out Pairing-OK.
※One Receiver can be matched with 8 Transmitters at the same time. Switch one by one by pressing the middle button of the Transmitter. Please note, that every Transmitter needs to be paired well with the Receiver.
Steps to directly connect the phone to the screen
Connect to Home Router WiFi
When using it for the first time, please give priority to connecting the
device to the home WiFi router
- Click WiFi on your phone settings page， and connect your phone to MiraScreen Wi-Fi (Name is RX-Bxxxxx Default password is 12345678）.
- Turn on Phone / Pad Browser, input 192.168.203.1
- Click Internet, and Choose your Home WiFi.
- Connect Input password and click Enter.
The function applies to iPhone/iPad/Android Devices.
Setup for iOS
Direct Connect for iOS
-
Connect your iPhone to your home Wi-Fi. Make sure both dongle and mobile phone are connected to the same Home wifi.
*If the dongle fails to set Step 1
Use iPhone / iPad’s Setting WiFi, find the Hot Spot of MiraScreen and connect it. (RX-BXXXXX Password: 12345678)
-
Slide Screen and go to Apple’s control center, click.
“Airplay Mirroring”, then select RX-BXXXXXX
Setup for Android
Method 1 (No need to set the Step1)
- Open the phone settings
- Find the Cast function of your phone
- Select MiraScreen as the target
The cast funtion name of different brands may be different.
HUAWEI : Setting > Smart Assist > Multi-screen Interactive
Xiaomi : Settings>Connection&Sharing>Cast (Turn on cast)
OnePlus : Settings – Bluetooth & device connection – cast
OPPO : Settings>Other wireless connections>Screencast
MEIZU : Setting-Display > Projection Screen
Lenovo : Setting Display > Wireless Display
SAMSUNG : Phone From Top To Bottom > Smart View
VIVO: Settings>Other networks and connections>Smart Mirroring>Connect to
a TV> Setting icon (Right top corner)>Screen mirroring
For more models, please contact our customer service
*Method 2 Use Google home to connect dongle Need to set step 1 (please
confirm that your purchased product and mobile phone support Google home
function)**
- Turn on the Android phone WiFi and confirm that the phone WiFi and the device are connected to the same WiFi Home network.
- Open Google Home, wait ten seconds will search for the device (RX-Bxxxxx), and Click it to implement screen mirroring
(If the MiraScreen-xxxxx can not be found please refresh the homepage of Google Home. verity that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi, or restarting your phone or device).
Dose and Don’ts and Troubleshooting
- If this wireless HDMI kit could not work, please check if you plug the right cable for them: External antenna for the receiver (RX), USB C cable for the transmitter (TX), and power both of them by plugging the USB cable into the device’s USB port.
- This wireless HDMI kit’s transmission range would become weak and slow if it passes through solid walls or metal firewalls.
- If this wireless HDMI kit could not mirror the content, please try to reset them again.
- As Window software limitations, this wireless HDMI kit could not support 4K. But if uses the Receiver alone, it can mirror 4K resolution image/video to the TV.
Technical support email:Support@Aimibo.tv
V2.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>