BRAUN BWC02 Wireless Charger Instruction Manual
- June 3, 2024
- Braun
Table of Contents
BWC02
Wireless charger
User instructions
Guarantee
Getting started
- Choose a flat location with easy access to a working electric supply to power up your wireless charger.
- Peel away the frosted surface protector.
- Unravel the USB-C cable and plug it into your adapter.
- Plug the other end of the cable into your BRAUN Wireless Charging Pad.
Charger status
Your BRAUN Wireless Charging Pad has a green LED light at the front that gives you information about the status of the device.
- When connecting to the adaptor, the light will flash 3 times showing that it is ready to use.
- When a device is placed on the pad, a continuously glowing light indicates that it is charging. It will dim to a low level after 60 seconds.
- If the device to be charged is not placed correctly or if there are any foreign objects on the pad, the light will either turn off or flash continuously and the device will not be charged properly.
How to safely and properly use your BRAUN Wireless Charging Pad
- If you’re using an accessory with your phone, for example, a phone case, card wallet…etc., please remove it before charging as it may affect the charging performance or even cause the charger to malfunction.
- For maximum charging efficiency, the device must be aligned with the centre of the charging area.
- For best charging performance, we recommend using an adapter with 20W power delivery.
- No metal case or foreign objects should be placed between the device and the charging pad.
- High temperature will reduce the charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that charging your device in environments with temperatures below 25ºC / 77ºF.
Product description
- LED light
- Charging pad
- USB-C input
Product Information
Name: Braun Wireless Charger
Model Number: BWC02
Input: 5V/3A; 9V/2.2A; 12V/1.67A
Output: 5W / 7.5W / 10W / 15W
Operating frequency range: 110-205kHz
Manufacturer: Zeon Ltd.
Manufacturer Address: Unit 1, Phoenix Park, Apsley Way, London, England,
NW2 7LN
WARNINGS – Important Safety Instructions
Read all instructions and warnings prior to using this product. Improper use
of this product may result in product damage, excess heat, fire, or explosion.
- Do not place metal objects between phone and charger as the charger may get very hot.
- Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat, as this may reduce charge efficiency or reduce lifespan of the product.
- Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high temperature may cause explosion.
- Do not expose the wireless charger to water. Exposure to water may result in short-circuiting. If short-circuiting occurs immediately turn off at the wall.
- Do not disassemble this product, any modification or disassemble may result in a void of warranty.
- Use of a power supply or charger not recommended may result in a risk of fire or injury to persons.
- If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
- All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use.
Note:
This product is meant for use only in conjunction with the QI-compatible
device. Manufacturer is not responsible for any damages to any device incurred
through the use of this product. Manufacturer shall not in any way be liable
to you or to any third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this product in
conjunction with any device or accessory other than the appropriate device for
which this product is designed. We will not be responsible for any damages you
or any third party may suffer as a result of misuse of this product as
outlined above.
Guarantee
2-year guarantee against material and workmanship defects. The guarantee is valid in those countries where the unit is officially being sold. Physical damage is not covered under the Guarantee.
Braun helpline
Should you have a problem with your product, please check your local service
centre at:
www.braun-clocks.com
www.braun-watches.com
or contact +44 808 175 3235 (calls free within the UK) or +44 208 208 1833.
WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) Directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body. This device complies
with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
WARNING! Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
UKCA Warning
This device was tested for fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the wireless charger, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other relevant provisions of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio test suites have been carried out.
EU Declaration of Conformity
We ZEON LIMITED UK, manufacturer of Braun Watches, Clocks & Wireless Chargers under license from the Procter & Gamble Company hereby declare that model BWC02 conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be viewed on our website at www.braun-clocks.com.
Certain trademarks used under license from the Procter & Gamble Company or its affiliates.
References
- Braun-Clocks: Braun Shop online | Buy Braun Clocks & Watches
- Braun-Clocks: Braun Shop online | Buy Braun Clocks & Watches
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>