SATCO NUVO 60-518 Round Cage Bulk Head Light Instruction Manual

SATCO NUVO 60-518 Round Cage Bulk Head Light

Product Information

This product is available in two models: ITEM NO 60-518 and ITEM NO 60-519. It comes with installation and safety instructions to guide users through the setup process. The instructions are divided into two groups, A and B, based on the house wire connections.

Group A: Connect to Black House Wire

• The black parallel wire should be used, which is round and smooth in shape.
• The white or grey wire with a tracer should be connected.
• The brown, gold, or black wire without a tracer should also be connected.

Group B: Connect to White House Wire

• The white parallel wire should be used, which is square and ridged in shape.
• The white or grey wire without a tracer should be connected.
• The brown, gold, or black wire with a tracer should also be connected. Note: When using parallel wires (SPT-I & SPT-2), it’s important to distinguish between the tracer and non-tracer wires. The tracer wire is square-shaped or ridged, while the non-tracer wire is round or smooth. This distinction is best observed when viewing the wires from the end.

Product Usage Instructions

1. Identify the type of house wire you have: black or white.

2. If you have black house wire
   (Group A):

   • Take your fixture wire(s) from Group A.
   • Place the fixture wire(s) evenly against the black wire from the outlet box.
   • Do NOT twist the wires together before using wire connectors.
   • Fit a wire connector over the wires.
   • Screw the connector clockwise until you feel firmness.

3. If you have white house wire (Group B):

   • Take your fixture wire(s) from Group B.
   • Place the fixture wire(s) evenly against the white wire from the outlet box.
   • Do NOT twist the wires together before using wire connectors.
   • Fit a wire connector over the wires.
   • Screw the connector clockwise until you feel firmness. Please refer to the provided figure for visual guidance. For any further assistance or clarification, please consult the complete user manual.

INSTALLATION AND SAFETY INSTRUCTIONS

Line art shown may not exactly match the fixture enclosed. However, the installations do apply to this fixture.

FOR YOUR SAFETY
WARNING : BE SURE THE ELECTRICITY TO THE WIRES
YOU ARE WORKING ON IS SHUT OFF; EITHER THE FUSE IS REMOVED OR THE CIRCUIT BREAKER IS SHUT OFF.

GENERAL
You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully. If you are unclear as to how to proceed, consult a qualified electrician.
NOTE : Proper wiring is essential for the safe operation of this fixture.

FIXTURE ASSEMBLY

Carefully remove the fixture from the carton and check that all parts are included as shown in figure. Be careful not to misplace any of the screws or parts, which are needed to install this fixture.

INSTALLATION

IMPORTANT : Do not attach fixture directly to outlet box.

• STEP 1: Fasten nipple to mounting bracket by screwing hex nut and adjust to desired length.
• STEP 2: Secure mounting bracket to outlet box with the outlet box screws.
• STEP 3: Connect wires with white to white and black to black. Cover the connections by using the wire connectors. Tie the ground wire from the outlet box and from the fixture to the ground screw on the mounting bracket.

GROUNDING INSTRUCTIONS

• STEP 1: Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector (not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
  NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES.

• STEP 2: Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:

GROUP A:

Connect to Black House Wire

| GROUP B:

Connect to White House Wire

---|---
BLACK| WHITE
PARALLEL WIRE (round & smooth)| PARALLEL WIRE (square & ridged)
WHITE OR GREY WITH TRACER| WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK WITHOUT TRACER| BROWN, GOLD OR BLACK WITH TRACER

NOTE : When parallel wire (SPT-I & SPT-2) is used, the tracer wire is square shaped or ridged and the less tracer wire is round in shape or smooth (seen best when viewed from wire end.)

• STEP 3: Take your fixture wire(s) from group A and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
• STEP 4: Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
• STEP 5: Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
• STEP 6: Connect the fixture wire from group B to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.

FINAL ASSEMBLY

• STEP 1: After wires are connected, tuck them carefully inside outlet box. Raise the wall plate against the wall allowing the nipple to pass through the center hole of the wall plate, and secure the wall plate with pipe nut.
• STEP 2: Install lamp (not included). Please do not exceed the maximum capacity recommended on the socket.
• STEP 3: Secure the glass shade and metal shade to the wall plate by using the mounting screws.

CLEANING

•  To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

ORDERING PARTS

• Keep this sheet for future reference, and in case you need to order replacement parts. Be sure to use exact wording from illustration when ordering parts.

© Copyright 2022 Satco Products, Inc. 10/22 v1.0

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>