GE APPLIANCES PHP9030BMTS 30 Inch Built-In Touch Control Induction Cooktop Owner’s Manual
- June 12, 2024
- GE Appliances
Table of Contents
GE APPLIANCES PHP9030BMTS 30 Inch Built-In Touch Control Induction
Cooktop
Product Information
The PHP9030SJ/BM is a GE ProfileTM 30 Built-In Touch-Control Induction Cooktop. It is designed for installation in your kitchen countertop and offers advanced touch controls for precise cooking.
Here are some key dimensions and installation information:
-
Requires a 3-inch free area between the bottom of the cooktop and any combustible material.
-
Requires a 15-inch minimum distance from the cooktop to adjacent overhead cabinets.
-
Comes with a 48-inch flexible armored cable for electrical connection.
Approximate cooking dimensions:
-
Maximum depth of unprotected overhead cabinets: 13 inches (when no hood or microwave is installed)
-
Baffle depth near the center of the unit: 4-5/8 inches (except when installed above an approved wall oven)
-
Rear air intake depth: 3-1/4 inches
-
Cooktop width: 29-7/8 inches
-
Cooktop height: 21 inches
A filler trim kit (JXTR32B for black or JXTR32W for white) is available to reduce the cutout opening for installation if your countertop cutout is larger than the specified dimensions.
It is recommended to make a template when cutting the opening in the counter to ensure accuracy.
The cooktop requires a minimum clearance of 2-1/2 inches to the rear wall and a minimum clearance of 2 inches to the side walls.
If installing above a wall oven, there should be a minimum distance of 2-1/2 inches from the front edge of the countertop to the front edge of the cooktop cutout, and a minimum distance of 31-1/4 inches from the top surface of the countertop to the top surface of the wall oven support platform.
The cooktop has a KW rating of 7.4 at 240V and 6.4 at 208V. The amperage is 40 Amps for both voltage options. Please check local codes for the required breaker size.
The cooktop is ADA compliant and listed by Underwriters Laboratories.
If you are replacing a similar cooktop from GE Appliances or another brand, the GE cooktops are guaranteed for an exact fit. GE Appliances will pay up to $100 toward modifications if needed.
For more information, visit geappliances.com.
Product Usage Instructions
-
Ensure that there is a 3-inch free area between the bottom of the cooktop and any combustible material.
-
Make sure there is a 15-inch minimum distance from the cooktop to adjacent overhead cabinets.
-
Connect the cooktop to a suitable electrical supply using the provided 48-inch flexible armored cable.
-
If your countertop cutout is larger than the specified dimensions, consider using the filler trim kit (JXTR32B for black or JXTR32W for white) to reduce the cutout opening for installation.
-
If required, make a template when cutting the opening in the counter to ensure accuracy.
-
Provide a minimum clearance of 2-1/2 inches to the rear wall and 2 inches to the side walls.
-
If installing above a wall oven, ensure a minimum distance of 2-1/2 inches from the front edge of the countertop to the front edge of the cooktop cutout, and 31-1/4 inches from the top surface of the countertop to the top surface of the wall oven support platform.
-
Check local codes for the required breaker size for electrical connection.
-
Follow the touch control instructions provided in the user manual for precise cooking.
PHP9030SJ/BM
GE Profile™ 30″ Built-In Touch-Control Induction Cooktop
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
IMPORTANT : Requires a 3″ free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15″ minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48″ flexible armored cable.
NOTE : 30″ induction cooktops are approved for use over select GE 27″ and
GE 30″ Single Wall Ovens and Warming Drawers. Refer
to cooktop and wall oven/warming drawer installation instructions packed with
product for current dimensional data. If installed with a GE Telescopic
Downdraft System, consult both the cooktop and downdraft installation
instructions packed with product before installing. Cooktop gas/electric
supply may need to be re-routed to install downdraft. The countertop cutout
requires 23-1/2″ minimum flat countertop surface and 25″ minimum total
countertop depth. In addition, other clearances to front edge of the
countertop must be considered. Before installing, consult installation
instructions packed with product for current dimensional data.
CUTOUT FILLER TRIM KIT :
A filler trim kit is available for use if your countertop cutout is larger
than the dimension shown, up to 29-13/16″ x 20-7/16″. Order JXTR32B for black
or JXTR32W for white, to reduce the cutout opening for installation of this
cooktop. These kits may be ordered from your GE Appliances Dealer.
APPROXIMATE COOKING DIMENSIONS
To insure accuracy, it is best to make a template when cutting the opening in the counter
INSTALLATION ABOVE A WALL OVEN
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE
Appliances product questions, visit our website at geappliances.com or call GE
Answer Center® Service, 800.626.2000.
KW RATING
240V| 7.4
208V| 6.4
AMPERAGE
240V| 40 Amps†
208V| 40 Amps†
NOTE: Check local codes for required breaker size.
FEATURES AND BENEFITS
- Four induction elements
- Digital touch controls
- Power Boil (11″ 3,700-watt induction element) SyncBurners
- Auto-pan size detection
- Worry-free pan detection
- Kitchen timer
- Control lock capability
- Red LED with black glass surface
- Hot surface indicator lights
- Fit Guarantee
- Model PHP9030SJSS – Stainless Steel Model PHP9030BMTS – Black stainless
GUARANTEED FIT
Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications Visit geappliances.com for more info
Listed by Underwriters Laboratories
Specification Revised 03/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>