vtech Sew & Play Unicorn Imaginative Play Toy Instruction Manual
- June 13, 2024
- vtech
Table of Contents
vtech Sew & Play Unicorn Imaginative Play Toy
Product Information
The Sew & Play UnicornTM is a creative toy that allows children to build
sewing skills and express their creativity by making a magical unicorn. This
playful friend not only serves as a
stuffed animal but also talks and sings about colors. The unicorn’s horn,
cheeks, and tummy light up in a rainbow of colors, adding to the magical
experience.
Included in the Package
- 1 Sew & Play UnicornTM
Product Features
- Mode Switch: Allows you to switch between Play Mode, Light Mode, and Off.
- Heart and Star LED Buttons: Interact with the unicorn in Play Mode or change the LED effects in Light Mode.
- Motion Sensor: Shake the unicorn to listen to songs in Play Mode (no response in Light Mode).
Care & Maintenance
To ensure the longevity of the Sew & Play UnicornTM, please follow these
care instructions:
- Keep the unit clean by wiping it with a slightly damp cloth.
- Avoid direct sunlight and keep the unit away from direct heat sources.
- If the unit will not be used for an extended period, remove the batteries.
- Avoid dropping the unit on hard surfaces and exposing it to moisture or water.
Troubleshooting
If you encounter any issues with the Sew & Play UnicornTM, please try the
following steps:
- Turn the unit off.
- Remove the batteries to interrupt the power supply.
- Allow the unit to stand for a few minutes.
- Replace the batteries.
- Turn the unit on again.
- If the unit still doesn’t work, install a new set of batteries.
Environmental Phenomena
- The Sew & Play UnicornTM may experience malfunctions due to radio-frequency interference. In such cases, turning the power off and on or removing and reinstalling the batteries should resolve the issue. Additionally, an electrostatic discharge may cause the unit to malfunction and lose memory. Reset the device by removing and reinstalling the batteries if this occurs.
- This device complies with Part 15 of the FCC rules and is designed to avoid harmful interference. It accepts any interference received, including interference that may cause undesired operation.
Product Usage Instructions
Battery Removal and Installation
- Make sure the unit is turned off.
- Locate the battery cover on the bottom of the unit and use a screwdriver to loosen the screw and open the cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 3 new AAA (AM-3/LR6) batteries following the diagram inside the battery box. For optimal performance, it is recommended to use alkaline batteries or fully charged Ni-MH rechargeable batteries.
- Replace the battery cover and tighten the screw to secure it.
Note: Adult assembly is required for battery installation. Keep batteries out of reach of children.
Mode Switch
The Mode Switch allows you to control different modes of operation:
- Play Mode: Slide the switch to Play Mode to interact with the unicorn using the Heart and Star LED buttons. In this mode, the unicorn will talk and sing.
- Light Mode: Slide the switch to Light Mode to enjoy a light show. Use the Heart and Star LED buttons to change the LED effects.
- Off: Slide the switch to Off to turn off the unicorn.
Heart and Star LED Buttons
Press the Heart and Star LED buttons to interact with the unicorn in Play
Mode or to change the LED effects in Light Mode.
Motion Sensor
In Play Mode, shake the unicorn to listen to songs. The motion sensor does
not respond in Light Mode.
INTRODUCTION
Thank you for purchasing the Sew & Play UnicornTM! Build sewing skills and
express your creativity while making a magical unicorn. When you’re done, this
playful friend talks and sings about colors while her horn, cheeks and tummy
light up in a rainbow of colors.
INCLUDED IN THE PACKAGE
- Sew & Play Unicorn™
- Guidebook
- 1 Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable
tags, cable ties, cords and packaging screws are not part of this toy, and
should be discarded for your child’s safety.
GETTING STARTED
Battery Removal and Installation
-
Make sure the unit is turned Off.
-
Find the battery cover located on the bottom of the unit, use a screwdriver to loosen the screw and open the battery cover.
-
Remove old batteries by pulling up on one end of each battery.
-
Install 3 new AAA (AM-3/LR6) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are
recommended.) -
Replace the battery cover and tighten the screw to secure.
- WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.
- NOTE; Please save this Instruction Manual as it contains important information.
PRODUCT FEATURES
-
Mode Switch (Play Mode – OFF – Light Mode)
Slide the switch to OFF to turn off the unicorn. Slide the switch to Play Mode to play with lights and sounds. Slide the switch to Light Mode to watch a light show. -
Heart and Star LED Buttons
Press the Heart and Star LED buttons to interact with the unicorn in Play Mode, or to change the LED effects in Light Mode. -
Motion Sensor
Shake the unicorn to listen to songs while in Play Mode. No response in Light Mode.
BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
- Remove rechargeable batteries (if removable) from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow these steps:
- Turn the unit Off.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit On The unit will now be ready to play again.
- If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
- If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to our website vtechkids.com and filling out our Contact Us form located under the Customer Support link.
- Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur.
- It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.
Environmental Phenomena
- The unit may malfunction if subjected to radio-frequency interference.
- It should revert to normal operation when the interference stops.
- If not, it may become necessary to turn the power Off and back On, or remove and reinstall the batteries.
- In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS
- THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE
- THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. CAN ICES-003(B)/NMB-003(B)
Note:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
- Trade Name: VTech®
- Model: 5664
- Product Name: Sew & Play UnicornTM
- Responsible Party: VTech Electronics North America, L.L.C.
- Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004
- Website: vtechkids.com
Visit our website for more information about our products, downloads,
resources and more.
vtechkids.com
vtechkids.ca
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty
TM & © 2023 VTech Holdings Limited.
All rights reserved.
IM-566400-000
Version:0
Documents / Resources
|
vtech Sew & Play Unicorn Imaginative Play
Toy
[pdf] Instruction Manual
Sew Play Unicorn, Sew Play Unicorn Imaginative Play Toy, Imaginative Play Toy,
Play Toy, Toy
---|---
References
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>