P10E TWS Wireless Earbuds User Manual

P10E TWS Wireless Earbuds

Product Information

Product Name: P10E

Model: CY-03Pro

Manufacturer: Not specified

Compliance: FCC Part 15

Radiation Exposure Limits: Complies with FCC standards for an uncontrolled environment

Product Usage Instructions

1. Caution: Any changes or modifications to this device that are not explicitly approved by the manufacturer may void your authority to operate this equipment.
2. This device complies with part 15 of the FCC Rules. It is designed to not cause harmful interference.
3. The device must accept any interference received, including interference that may cause undesired operation.
4. For safety reasons, this equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Power

Power On
Open the charging case, the earbuds will automatically power on.

Power Off
Place the earbuds back into the charging case and close the case, the earbuds will automatically power off.

Paring&Re-pairing

1. Open the charging case and take both Earbuds out of the charging case and the twin Earbuds will power on and pair with each other automatically.
2. Active Bluetooth setting on your device ,search and choose “CY-03Pro” to connect Yau will hear a voice prompt “di” when the earbuds connect with your device successfully.
3. The earbuds can remember previously paired devices.When you make the second connection ,simply active the Bluetooth in your devices, take out the both earbuds from the charging case.They will reconnect to your device automatically.If the earbuds doesn’t automatically connect to your device, please active the Bluetooth in your device and click ” CY-03Pro” on the Bluetooth list.
4. Mono mode: When Bluetooth connected, you can use either one of the earbuds only by putting the other one back into the charging case and closing the cover.

Factory Reset

Try the following steps if you fail building connection between earbuds and device:

1. Clear pairing record between the earbuds and all your devices.

LED Indicator Behavior

Specifications

Control

Stereo Mode

Play/Pause  tap once
Previous track   tap two times
Next track tap   two times
Answer phone call/Hang up   tap two times
Reject phone call    long press for 45
Active voice assistant  tap three times

Mono Mode

Play/Pause tap once
Answer phone call/Hang up tap two times
Reject phone call  long press for 4s
Active voice assistant tap three times

Charging

Charging the earbuds
You will hear a voice prompt “dididi” When the earbuds battery is low.

1. When the charging case is powered, put the earbuds into the charging case and close the charging case,the earbuds will charge automatically.

Charging the charging case
When charging case battery is low,the LED indicator of the charging case is rapidly flashing in red.

1. Please use the provided USB-C cable to charge the charging case directly.
2. During charging, the LED indicator of the charging case is rapidly flashing in red. When the the case are fully charged, the LED indicators will be turning red.
   NOTE: Fully charge both the earbuds and the charging case before the first use.

Warranty

We provide warranty service in accordance with the national three-guarantee policy.

Made In China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>