AURORA AU-A1BTGSCWE 8W E27 GLS Dimmable RGBCX LED Lamp Instruction Manual
- June 4, 2024
- Aurora
Table of Contents
AU-A1BTGSCWE 8W E27 GLS Dimmable RGBCX LED Lamp
Instruction Manual
AU-A1BTGSCWE 8W E27 GLS Dimmable RGBCX LED Lamp
MODEL| AU-Al BTGSCXE, AU-A1BTGSCXB
AU-Al BTGSCWE, AU-A1 BTGSCWB
---|---
VOLTAGE (V)| 220-240V
SUPPLY FREQUENCY| 50/60Hz
POWER CONSUMPTION| 8W
POWER FACTOR| 0.5
LUMENS| 800-850Im
CCT| 2700K – 5000K
LAMP BASE| E27 (AU-Al BTGSCXE, AU-Al BTGSCWE)
B22 (AU-Al BTGSCXB, AU-Al BTGSCWB)
DIMENSIONS (0 x H)| 60x117mm
START TIME| 0.5s
STAND BY POWER| 0.6W – 1W
MAX. OUTPUT RF POWER| 5.5 dBm/mW (GLS)
MAX. NUMBER OF DEVICES| 64 Devices
STANDARD OPERATING TEMPERATURE| -20°C to 40°C
IP RATING| IP20 (Use in dry locations only)
IP20 (Utilisation uniquement en locaux non humide)
IP20 (Nur fiir trockene Umgebungen geeignet)
PROTOCOL| Bluetooth BLE 4.2 Mesh
FREQUENCY BAND| 2.402 GHz – 2.48 GHz
Setting up your smart lamp with Connect. Control Remote (without App):
- There is no need to download the App if you just plan to control your lamps using the remote.
- They will work ‘out of the box with the remote AU-Al BTRC1
- For further instructions on remote functionality please review the Remote instructions.
Making adjustments to your scenes when using Connect. Control Remote (With App):
- Download the Aurora BLE app, and sign in using Username: Aurora and Password: 123.
- Your devices will automatically appear in the App. There is no need to manually pair them.
- You can edit scenes by pressing on the Scenes icon, long press on one of the 5 scenes, and either adjust the brightness/color of the ‘Light’ (individual lamp) or ‘Area’ (all lights) in the scene to your preferred setting and press save.
- Your Connect. The control remote will now recall your edited scene. There is no need to pair the remote to the app.
- If you want to reset the scene then simply power off/on the devices 6 times and the factory settings will return.
- Using the universal login details, the Bluetooth mesh is saved against these details and therefore you cannot change them. If you want to set up your own details follow the next steps.
If you just want to pair your lamps to the App without the Connect.Control functionality:
- Ensure you have downloaded the Aurora BLE App.
- We recommend only pairing one lighting circuit at a time otherwise, there is a risk other smart devices will be found on other lighting circuits.
- Ensure the wall switch for the lighting circuit is switched off before fitting the lamp. Your Aurora Smart lamp is fitted in the same way that traditional household lamps are fitted. Once fitted, ensure the lamp is switched off until you are ready to pair your devices.
- Open your App and go to the ‘add devices’ icon. Turn the lamp on, it should automatically flash twice showing it is in pairing mode. The lamps should automatically show on the App pairing screen. Ensure all lamps on the circuit have been discovered.
- If any devices have not been found. Press ‘Done’ and delete all the devices and reset the lamps by switching off/on six times. After the sixth time, they should flash three times. Follow Step 4 to pair your lamps again.
- Once complete, follow the advice on the App to control your lights, and create spaces, schedules, and scenes.
Remember
To turn your Aurora Smart Lamp on or off remotely it must be switched on at
the wall/fixture. Your Aurora Smart Lamp should not be dimmed using a wall-
mounted dimmer switch as it may cause buzzing or flickering. Keep away from
liquids and humidity, Use in dry locations only. Not suitable for emergency
lighting.
For lamps with a weight significantly higher than that of the lamps for which
they are a replacement, attention should be drawn to the fact that the
increased weight may reduce the mechanical stability of certain luminaires and
lamp holders and may impair contact making and lamp retention.
The lamp is based on protocol Bluetooth 4.2, to control on/off, CCT, and
brightness dimming it must be controlled through the App. This product is not
suitable for a dimming circuit.
Maintenance
Before replacing the lamp, turn off the mains power and let the lamps cool to
avoid electrical shock or burns.
Disconnect your Aurora Smart Lamp before cleaning and keep it away from water
and other liquids at all times.
The Aurora Smart Lamp does not contain any serviceable parts so do not attempt
to open it.
RED Compliance
There are no restrictions on use.
Hereby, Aurora Limited declares that the radio equipment type listed within
this guide are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: auroralighting.com
Environmental Protection (W.E.E.E.) — Aurora’s WEEE Reg.No. WEE/BG0130YX
(UK Only)
Waste Electrical & Electronic Equipment Regulations (WEEE) require that any of
our products showing this marking (left) must not be disposed of with other
household or commercial waste. Aurora does not levy any WEEE disposal charges
to its customers for affected WEEE-related products. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please
separate any such product from other waste types and recycle it responsibly at
your local facilities. Check with your Local Authority, Recycling Centre, or
retailer for recycling advice. If, when you purchased any Aurora product, your
supplier included a WEEE disposal fee, you should then contact your supplier
for advice on his take-back of the product for the correct disposal.
Warranty
See www.auroralighting.com/warranty for full details of warranties and Extended Warranty Terms and Conditions. The warranty is invalid in the case of improper use, tampering, and removal of the Q.C. date label, installation in an improper working environment, or installation not according to the current edition of the National Wiring Regulations. Should this product fail during the warranty period it will be replaced free of charge, this is subject to correct installation and return of the faulty product. Aurora does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Aurora reserves the right to alter specifications without prior notice.
Aurora Limited
6 Little Burrow, Burrowfields,
Welwyn Garden City,
AL7 4SW, United Kingdom
auroralighting.com
Document Version:
AU-Al EITGSCXE_Al BTGSCXB_Al EITGSCWE_Al INGSCWB_V2_20 CONNECT. CONTROL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>